K-Deck 16mm Grooved Fire-Resistant Decking ...

K-Deck 16mm Grooved Fire-Resistant Decking Board

Supplier: FireCrunch Australasia

K-Deck is a fire-resistant, non-combustible decking board designed for demanding Australian conditions and compliant with stringent bushfire and fire standards.

Exceeds bushfire BAL FZ and fire safety requirements as a certified non-combustible decking board.

Key Features

Fireproof and non-combustible for up to 90 minutes at 1000°C – three times the requirements for bushfire BAL FZ decking
Certified to meet or exceed AS 3959 BAL FZ, AS1530.1 (non-combustible), and AS1530.4 (fire resistance), valid until 2029
30, 60, 90 and 120 minute fire resistance in both load and non-load bearing scenarios
Completely free of asbestos, termite, bacteria, mould, and resistant to flood and humidity
Low thermal conductivity (~0.44 W/mk) and higher R-values compared to plasterboard
10x stronger than plasterboard with load-bearing capacity up to 55kN at 1000°C for 1.5 hrs
95% less CO2 emissions than plasterboard, fully eco-friendly and sustainable
Requires fewer layers for high FRL ratings—replacing 3 layers of plasterboard with only one K-Deck
Quick and simple to cut, saw and drill with standard timber tools; fast installation

Application & Compliance

Suitable for external decking in bushfire-prone areas, bushfire boundary walls, acoustic and firewalls
Compliant with the National Construction Code NCC 2022 C1 TO C19 & numerous fire hazard standards
Tested and approved by NATA Accredited Testing Laboratory and the CSIRO

Specifications

Board name	K-Deck 2-sided TG
Size (Length x Width)	2700mm x 600mm
Thickness	16mm
Edge	Tongue & Groove
Weight	40kg
Pattern	Grooved

Performance & Environmental Benefits

Certified bushfire decking alternative to conventional timber in flame zone areas (BAL FZ compliance)
Load bearing and acoustic performance (Rw62 AS717.1)
Single panel per side may achieve FRL ratings up to 90/90/90 on steel frames; 60/60/60 on timber frames
Lowest pollutive footprint: only 5% of the CO2 emissions compared to traditional plasterboard
Australian tested, certified and manufactured

To contact FireCrunch Australasia about K-Deck 16mm Grooved Fire-Resistant Decking Board use Get a quote.

Key Features

Fireproof and non-combustible for up to 90 minutes at 1000°C – three times the requirements for bushfire BAL FZ decking
Certified to meet or exceed AS 3959 BAL FZ, AS1530.1 (non-combustible), and AS1530.4 (fire resistance), valid until 2029
30, 60, 90 and 120 minute fire resistance in both load and non-load bearing scenarios
Completely free of asbestos, termite, bacteria, mould, and resistant to flood and humidity
Low thermal conductivity (~0.44 W/mk) and higher R-values compared to plasterboard
10x stronger than plasterboard with load-bearing capacity up to 55kN at 1000°C for 1.5 hrs
95% less CO2 emissions than plasterboard, fully eco-friendly and sustainable
Requires fewer layers for high FRL ratings—replacing 3 layers of plasterboard with only one K-Deck
Quick and simple to cut, saw and drill with standard timber tools; fast installation

Application & Compliance

Suitable for external decking in bushfire-prone areas, bushfire boundary walls, acoustic and firewalls
Compliant with the National Construction Code NCC 2022 C1 TO C19 & numerous fire hazard standards
Tested and approved by NATA Accredited Testing Laboratory and the CSIRO

Specifications

Board name	K-Deck 2-sided TG
Size (Length x Width)	2700mm x 600mm
Thickness	16mm
Edge	Tongue & Groove
Weight	40kg
Pattern	Grooved

Performance & Environmental Benefits

Certified bushfire decking alternative to conventional timber in flame zone areas (BAL FZ compliance)
Load bearing and acoustic performance (Rw62 AS717.1)
Single panel per side may achieve FRL ratings up to 90/90/90 on steel frames; 60/60/60 on timber frames
Lowest pollutive footprint: only 5% of the CO2 emissions compared to traditional plasterboard
Australian tested, certified and manufactured

Read less...

To contact FireCrunch Australasia about K-Deck 16mm Grooved Fire-Resistant Decking Board use Get a quote.

FireCrunch-K-Sound-FireWall-Plus-Acoustic-Single-Frame-Rw50(0.74MB)

FireCrunch-Bushfire-Manual(1.92MB)

FireCrunch-K-Fire-19-SL4-Shaft-Liner-Summary(3.24MB)

Let FireCrunch Australasia provide you with a quote

Supplier

Supplier: FireCrunch Australasia

Distribution: Australia, New Zealand, Worldwide

Location: SYDNEY, NSW

Customers: Ergon Energy, Onslow PowerJohn Holland, Cubit Construction, Lend lease, Richard Crookes,

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. FireCrunch Australasia are also proudly displaying these credentials:

Established:

2011

Employees:

6-20

Customers:

Ergon Energy, Onslow PowerJohn Holland, Cubit Construction, Lend lease, Richard Crookes,

Memberships:

FIRE PROTECTION ASSOCIATION AUSTRALIA FPAA

Certifications:

NATA, CSIRO Firetests (AS/1530.4-REASSESSED TO2025

Distribution:

Australia, New Zealand, Worldwide