Unimig - Plasma Cutter | RAZOR 80 Price Guide: $1,875 Get latest price

Plasma Cutter | RAZOR 80

In Stock

Features of this product

• Pilot Arc Start lets you start the arc before contacting the work piece. This gives you better control of the torch, especially on materials with uneven or curved surfaces.

Specifications of this product

We have various models and specifications in our range. These details are for the Plasma Cutter | RAZOR 80. Get in touch to let us know your requirements so we can quote you on a product that best suits your needs.

• Primary Input Voltage: 415v Three Phase
• Supply Plug: No Plug Supplied (20 Amp Recommended)
• Rated Input Power (Kva): 15.0
• No Load Voltage (V): 340
• Protection Class: Ip21s
• Insulation Class: F
• Minimum Generator (Kva): 15.0
• Dinse Connector: 35/50
• Standard: As/Nz60974-1
• Warranty (Years): 3
• Plasma Cut Current Range: 20-80a
• Plasma Cut Duty Cycle @ 40°C: 40% @ 80a
• Mild Steel Cut Thickness: 30mm
• Mild Steel Severance Thickness: 35mm
• Aluminium Cut Thickness: 16mm
• Aluminium Severance Thickness: 20mm
• Stainless Steel Cut Thickness: 16mm
• Stainless Steel Severance Thickness: 20mm
• Air Flow Draw Off (L/Min): 189
• Air Flow Pressure (Bar): 5.17 (75 Psi)
• Plasma Arc Start: Pilot Arc

To contact Eureka Gas and Gear about Unimig Plasma Cutter | RAZOR 80 use Get a quote.

Features of this product

• Pilot Arc Start lets you start the arc before contacting the work piece. This gives you better control of the torch, especially on materials with uneven or curved surfaces.

Specifications of this product

We have various models and specifications in our range. These details are for the Plasma Cutter | RAZOR 80. Get in touch to let us know your requirements so we can quote you on a product that best suits your needs.

• Primary Input Voltage: 415v Three Phase
• Supply Plug: No Plug Supplied (20 Amp Recommended)
• Rated Input Power (Kva): 15.0
• No Load Voltage (V): 340
• Protection Class: Ip21s
• Insulation Class: F
• Minimum Generator (Kva): 15.0
• Dinse Connector: 35/50
• Standard: As/Nz60974-1
• Warranty (Years): 3
• Plasma Cut Current Range: 20-80a
• Plasma Cut Duty Cycle @ 40°C: 40% @ 80a
• Mild Steel Cut Thickness: 30mm
• Mild Steel Severance Thickness: 35mm
• Aluminium Cut Thickness: 16mm
• Aluminium Severance Thickness: 20mm
• Stainless Steel Cut Thickness: 16mm
• Stainless Steel Severance Thickness: 20mm
• Air Flow Draw Off (L/Min): 189
• Air Flow Pressure (Bar): 5.17 (75 Psi)
• Plasma Arc Start: Pilot Arc

Read less...

To contact Eureka Gas and Gear about Unimig Plasma Cutter | RAZOR 80 use Get a quote.