Unimig - Stick Welder | RAZOR 205 Price Guide: $1,330 Get latest price

Stick Welder | RAZOR 205

In Stock

Features of this product

• The clever SMART SET™ Synergic MIG programs take the guesswork out of your settings.
• Simply select your wire size and gas mixture and the machine does the rest.
• The program works with both 0.8mm and 0.9mm mild steel wires.
• This three in one machine, lets you perform MIG, TIG and STICK welding all on one machine.
• There is also support for both gas shielded MIG and gasless MIG wire.
• There is no need to swap between machines, saving you time and setup.
• This machine features a four geared roller drive unit, providing the most consistent and smoothest wire feed.
• This also assists with using longer MIG Torches.
• This machine is Spool Gun ready, so you have the option of attaching a Spool Gun to run softer core wires such as Aluminium MIG wire.
• The advantage of the Spool Gun is that you do not need to change the setup of your existing torch or drive roller.
• The spool gun lets you quickly switch over to get the job done with no downtime.

Specifications of this product

We have various models and specifications in our range. These details are for the Stick Welder | RAZOR 205. Get in touch to let us know your requirements so we can quote you on a product that best suits your needs.

• Primary Input Voltage: 240v Single Phase
• Supply Plug: 15 Amp
• Rated Input Power (Kva): 9.4
• Ieff (A): 15.0
• Rated Output: 30a/15.5v - 200a/24.0v
• No Load Voltage (V): 53
• Protection Class: Ip21s
• Insulation Class: F
• Power Factor: 0.7
• Minimum Generator (Kva): 11.0
• Dinse Connector: 35/50
• Standard: As/Nz60974-1
• Suitable Material: Mild Steel, Stainless Steel, Cast Iron, Silicon Bronze, Aluminium, Copper
• Warranty (Years): 3
• Stick Welding Current Range: 10-200a
• Stick Duty Cycle @ 40°C: 15% @ 200a
• Stick Electrode Range: 2.5-4.0mm
• Stick Welding Thickness Range: 2mm - 12mm

Read more...

To contact Eureka Gas and Gear about Unimig Stick Welder | RAZOR 205 use Get a quote.

Features of this product

• The clever SMART SET™ Synergic MIG programs take the guesswork out of your settings.
• Simply select your wire size and gas mixture and the machine does the rest.
• The program works with both 0.8mm and 0.9mm mild steel wires.
• This three in one machine, lets you perform MIG, TIG and STICK welding all on one machine.
• There is also support for both gas shielded MIG and gasless MIG wire.
• There is no need to swap between machines, saving you time and setup.
• This machine features a four geared roller drive unit, providing the most consistent and smoothest wire feed.
• This also assists with using longer MIG Torches.
• This machine is Spool Gun ready, so you have the option of attaching a Spool Gun to run softer core wires such as Aluminium MIG wire.
• The advantage of the Spool Gun is that you do not need to change the setup of your existing torch or drive roller.
• The spool gun lets you quickly switch over to get the job done with no downtime.

Specifications of this product

We have various models and specifications in our range. These details are for the Stick Welder | RAZOR 205. Get in touch to let us know your requirements so we can quote you on a product that best suits your needs.

• Primary Input Voltage: 240v Single Phase
• Supply Plug: 15 Amp
• Rated Input Power (Kva): 9.4
• Ieff (A): 15.0
• Rated Output: 30a/15.5v - 200a/24.0v
• No Load Voltage (V): 53
• Protection Class: Ip21s
• Insulation Class: F
• Power Factor: 0.7
• Minimum Generator (Kva): 11.0
• Dinse Connector: 35/50
• Standard: As/Nz60974-1
• Suitable Material: Mild Steel, Stainless Steel, Cast Iron, Silicon Bronze, Aluminium, Copper
• Warranty (Years): 3
• Stick Welding Current Range: 10-200a
• Stick Duty Cycle @ 40°C: 15% @ 200a
• Stick Electrode Range: 2.5-4.0mm
• Stick Welding Thickness Range: 2mm - 12mm

Read less...

To contact Eureka Gas and Gear about Unimig Stick Welder | RAZOR 205 use Get a quote.