Unimig - MIG Welder | RAZOR 350 Price Guide: $2,805 Get latest price

MIG Welder | RAZOR 350

In Stock

Features of this product

• This machine includes a Separate Wire Feeder unit with the added benefit of being able to remove the wire feeder from the power source up to a distance of 10m. This is perfect for workshops when moving a complete machine isn’t an option.
• This three in one machine, lets you perform MIG, TIG and STICK welding all on one machine. There is also support for both gas shielded MIG and gasless MIG wire. There is no need to swap between machines, saving you time and setup.
• This machine features a four geared roller drive unit, providing the most consistent and smoothest wire feed. This also assists with using longer MIG Torches.
• This machine is Spool Gun ready, so you have the option of attaching a Spool Gun to run softer core wires such as Aluminium MIG wire. The advantage of the Spool Gun is that you do not need to change the setup of your existing torch or drive roller. The spool gun lets you quickly switch over to get the job done with no downtime.
• Push-Pull Guns provide the smoothest wire speed, especially when MIG welding Aluminium. The ‘Pull’ motor in the torch allows the wire to be fed over a much longer distance, giving you more flexibility to move and manoeuvre whilst MIG welding.
• Offering nothing but the best, this machine has been designed to offer the highest quality welds available from UNIMIG. With superior welding technology, no corners have been cut to make this machine the most powerful in its class.

Specifications of this product

We have various models and specifications in our range. These details are for the MIG Welder | RAZOR 350. Get in touch to let us know your requirements so we can quote you on a product that best suits your needs.

• Primary Input Voltage: 415v Three Phase
• Supply Plug: No Plug Supplied (32 Amp Recommended)
• Rated Input Power (Kva): 12.8
• Ieff (A): 26.0
• Rated Output: 50a/16.5v - 350a/31.5v
• No Load Voltage (V): 65
• Protection Class: Ip21s
• Insulation Class: F
• Power Factor: 0.93
• Minimum Generator (Kva): 20.0
• Dinse Connector: 35/50
• Standard: As/Nz60974-1
• Suitable Material: Mild Steel, Stainless Steel, Cast Iron, Silicon Bronze, Aluminium, Copper
• Warranty (Years): 3
• Mig Welding Current Range: 50-350a
• Mig Duty Cycle @ 40°C: 40% @ 350a
• Mig Wire Size Range: 0.6-1.2mm
• Mig Wire Spool Size: 5kg / 15kg
• Mig Welding Thickness Range: 1-16mm
• Drive Roller Size: 30/22 (X2)

Read more...

To contact Eureka Gas and Gear about Unimig MIG Welder | RAZOR 350 use Get a quote.

Features of this product

• This machine includes a Separate Wire Feeder unit with the added benefit of being able to remove the wire feeder from the power source up to a distance of 10m. This is perfect for workshops when moving a complete machine isn’t an option.
• This three in one machine, lets you perform MIG, TIG and STICK welding all on one machine. There is also support for both gas shielded MIG and gasless MIG wire. There is no need to swap between machines, saving you time and setup.
• This machine features a four geared roller drive unit, providing the most consistent and smoothest wire feed. This also assists with using longer MIG Torches.
• This machine is Spool Gun ready, so you have the option of attaching a Spool Gun to run softer core wires such as Aluminium MIG wire. The advantage of the Spool Gun is that you do not need to change the setup of your existing torch or drive roller. The spool gun lets you quickly switch over to get the job done with no downtime.
• Push-Pull Guns provide the smoothest wire speed, especially when MIG welding Aluminium. The ‘Pull’ motor in the torch allows the wire to be fed over a much longer distance, giving you more flexibility to move and manoeuvre whilst MIG welding.
• Offering nothing but the best, this machine has been designed to offer the highest quality welds available from UNIMIG. With superior welding technology, no corners have been cut to make this machine the most powerful in its class.

Specifications of this product

We have various models and specifications in our range. These details are for the MIG Welder | RAZOR 350. Get in touch to let us know your requirements so we can quote you on a product that best suits your needs.

• Primary Input Voltage: 415v Three Phase
• Supply Plug: No Plug Supplied (32 Amp Recommended)
• Rated Input Power (Kva): 12.8
• Ieff (A): 26.0
• Rated Output: 50a/16.5v - 350a/31.5v
• No Load Voltage (V): 65
• Protection Class: Ip21s
• Insulation Class: F
• Power Factor: 0.93
• Minimum Generator (Kva): 20.0
• Dinse Connector: 35/50
• Standard: As/Nz60974-1
• Suitable Material: Mild Steel, Stainless Steel, Cast Iron, Silicon Bronze, Aluminium, Copper
• Warranty (Years): 3
• Mig Welding Current Range: 50-350a
• Mig Duty Cycle @ 40°C: 40% @ 350a
• Mig Wire Size Range: 0.6-1.2mm
• Mig Wire Spool Size: 5kg / 15kg
• Mig Welding Thickness Range: 1-16mm
• Drive Roller Size: 30/22 (X2)

Read less...

To contact Eureka Gas and Gear about Unimig MIG Welder | RAZOR 350 use Get a quote.