Unimig - Plasma Cutter | RAZOR CUT 80 | KUPJRRW80 Get latest price

Plasma Cutter | RAZOR CUT 80 | KUPJRRW80

Plasma Cutter | RAZOR CUT 80 | KUPJRRW80

Plasma Cutter | RAZOR CUT 80 | KUPJRRW80

In Stock

Capable of clean cutting 30mm and severing 35mm, this machine is for the professional needing maximum power from a portable machine.

Product Features: 

• THERMAL OVERLOAD PROTECTION: Over Temperature Warning

Product Specifications: 

• PRIMARY INPUT VOLTAGE: 415V Three Phase
• SUPPLY PLUG: No plug supplied (20 AMP Recommended)
• RATED INPUT POWER (kVA): 15.0
• NO LOAD VOLTAGE (V): 340
• PROTECTION CLASS: IP21S
• INSULATION CLASS: F
• MINIMUM GENERATOR (kVA): 15.0
• DINSE CONNECTOR: 35/50
• STANDARD: AS/NZ60974-1
• WARRANTY (Years): 3
• SIZE & WEIGHT DIMENSIONS (mm): 560x220x415mm
• WEIGHT (kg): 16kg
• PLASMA CUT CURRENT RANGE: 20-80A
• PLASMA CUT DUTY CYCLE @ 40°C: 40% @ 80A
• MILD STEEL CUT THICKNESS: 30mm
• MILD STEEL SEVERANCE THICKNESS: 35mm
• ALUMINIUM CUT THICKNESS: 16mm
• ALUMINIUM SEVERANCE THICKNESS: 20mm
• STAINLESS STEEL CUT THICKNESS: 16mm
• STAINLESS STEEL SEVERANCE THICKNESS: 20mm
• AIR FLOW DRAW OFF (L/min): 189
• AIR FLOW PRESSURE (Bar): 5.17 (75 psi)
• PLASMA ARC START: Pilot Arc

Product Inclusions: 

• RAZOR™ CUT 80 Plasma Cutter
• 6m SC80 Plasma Torch
• 4m 300 AMP Earth Clamp
• Air Regulator
• Operating Manual

Read more...

To contact UNIMIG about Unimig Plasma Cutter | RAZOR CUT 80 | KUPJRRW80 use Get a quote.

Capable of clean cutting 30mm and severing 35mm, this machine is for the professional needing maximum power from a portable machine.

Product Features: 

• THERMAL OVERLOAD PROTECTION: Over Temperature Warning

Product Specifications: 

• PRIMARY INPUT VOLTAGE: 415V Three Phase
• SUPPLY PLUG: No plug supplied (20 AMP Recommended)
• RATED INPUT POWER (kVA): 15.0
• NO LOAD VOLTAGE (V): 340
• PROTECTION CLASS: IP21S
• INSULATION CLASS: F
• MINIMUM GENERATOR (kVA): 15.0
• DINSE CONNECTOR: 35/50
• STANDARD: AS/NZ60974-1
• WARRANTY (Years): 3
• SIZE & WEIGHT DIMENSIONS (mm): 560x220x415mm
• WEIGHT (kg): 16kg
• PLASMA CUT CURRENT RANGE: 20-80A
• PLASMA CUT DUTY CYCLE @ 40°C: 40% @ 80A
• MILD STEEL CUT THICKNESS: 30mm
• MILD STEEL SEVERANCE THICKNESS: 35mm
• ALUMINIUM CUT THICKNESS: 16mm
• ALUMINIUM SEVERANCE THICKNESS: 20mm
• STAINLESS STEEL CUT THICKNESS: 16mm
• STAINLESS STEEL SEVERANCE THICKNESS: 20mm
• AIR FLOW DRAW OFF (L/min): 189
• AIR FLOW PRESSURE (Bar): 5.17 (75 psi)
• PLASMA ARC START: Pilot Arc

Product Inclusions: 

• RAZOR™ CUT 80 Plasma Cutter
• 6m SC80 Plasma Torch
• 4m 300 AMP Earth Clamp
• Air Regulator
• Operating Manual

Read less...

To contact UNIMIG about Unimig Plasma Cutter | RAZOR CUT 80 | KUPJRRW80 use Get a quote.

RAZOR-CUT-80-Info-Sheet(0.71MB)

RAZOR-CUT-80-Manual(2.24MB)