RadioLinx Lightning Protection | LP-24002 / LP-24003

RadioLinx Lightning Protection | LP-24002 / LP-24003

Features and Benefits

LP-24002
The LP-24002 lightning protection is designed for use inside an enclosure with the bulkhead fitting protruding through the enclosure. The connectors are standard N jack connector to standard N jack BH connector. The bulkhead fitting can be connected to any standard N type connector extension cable.

LP-24003
The LP-24003 lightning protection is designed for use inside an enclosure with the bulkhead fitting protruding through the enclosure and connecting to a N plug barrel adapter. This can then connect to any antenna with a standard N type connector.

Applications

RadioLinx Lightning Protection is designed to protect the radio in the event of a lightning strike. A minimum 6 gauge copper wire should be used to connect the lightning protection to earth ground.

Hardware Specifications

Surge Capabilities	IEC 1000-4-5, 8/20µs @ 10kA
Frequency Range	2.0 to 6.0 GHz
Return Loss	> 20 dB
Insertion Loss	≤ 0.2 dB
RF Power	10W
Temperature Operating/Storage	-40°to 85°C
Relative Humidity	0 to 100% condensing
Surge Throughput Energy	≤ 0.5µJ (6kV/3kA 8/20µs)
Peak Let-Through Voltage	± 3V (6kV/3kA 8/20µs)

 

Read more...

To contact Prosoft Technology about RadioLinx Lightning Protection | LP-24002 / LP-24003 use Get a quote.

Features and Benefits

LP-24002
The LP-24002 lightning protection is designed for use inside an enclosure with the bulkhead fitting protruding through the enclosure. The connectors are standard N jack connector to standard N jack BH connector. The bulkhead fitting can be connected to any standard N type connector extension cable.

LP-24003
The LP-24003 lightning protection is designed for use inside an enclosure with the bulkhead fitting protruding through the enclosure and connecting to a N plug barrel adapter. This can then connect to any antenna with a standard N type connector.

Applications

RadioLinx Lightning Protection is designed to protect the radio in the event of a lightning strike. A minimum 6 gauge copper wire should be used to connect the lightning protection to earth ground.

Hardware Specifications

Surge Capabilities	IEC 1000-4-5, 8/20µs @ 10kA
Frequency Range	2.0 to 6.0 GHz
Return Loss	> 20 dB
Insertion Loss	≤ 0.2 dB
RF Power	10W
Temperature Operating/Storage	-40°to 85°C
Relative Humidity	0 to 100% condensing
Surge Throughput Energy	≤ 0.5µJ (6kV/3kA 8/20µs)
Peak Let-Through Voltage	± 3V (6kV/3kA 8/20µs)

 

Read less...

To contact Prosoft Technology about RadioLinx Lightning Protection | LP-24002 / LP-24003 use Get a quote.

Data Sheet(0.12MB)