PROFIBUS DPV1 Slave for ControlLogix | ...

PROFIBUS DPV1 Slave for ControlLogix | ILX56-PBS

PROFIBUS DPV1 Slave for ControlLogix®

18 Recent Views In Stock

The ILX56-PBS PROFIBUS DPV1 Multi-Slave module allows Rockwell Automation® ControlLogix® processors to communicate on a PROFIBUS DP protocol network by emulating up to 10 individual slave devices.

This multi-slave support of the module provides the ability to pass up to 2440 bytes of input and output data as high-speed cyclic I/O data on a PROFIBUS DP network.

Combined with the use of multiple I/O connections back to the ControlLogix processor, this module provides data update rates that will meet even the most demanding of PROFIBUS DP applications.

In addition, with the use of the PLX50 Configuration Utility you have advanced features such as custom-built Add-On Routines and a PROFIBUS DP packet capture utility to minimize the amount of time and effort in getting a ControlLogix PAC operating on a PROFIBUS DP network.

Features and Benefits

Rockwell Automation Encompass™-Approved Solution
Remote diagnostics via configuration utility with built-in PROFIBUS DP packet capture utility
Multi-slave mode allows module to emulate up to 10 individual slaves for transfer of up to 2440 bytes of cyclic I/O data
Supports DPV1 Acyclic Messaging
Add-On Profile and custom Add-On Routines provided to allow for seamless integration to Studio 5000

Specifications

Specification	Description
Slaves	Emulate up to 10 individual slaves
Input/Output	Maximum 244 Bytes per Slave
Input Data	Maximum 2440 Bytes (244 per slave)
Acyclic Data	DPV1
Status data	88 Bytes
Output data	Maximum 2440 Bytes (244 per slave)
DPV1 Services	Class 1 Read/Write, Class 1 Alarm
Services	Global-Control, Slave-Diagnostic, Set-Parameter
Sync, Freeze Command	Supported
Baud rate	9.6 kBaud, 19.2 kBaud, 45.45 kBaud, 93.75 kBaud, 187.5 kBaud, 500 kBaud, 1.5 MBaud, 3 MBaud, 6 MBaud, 12 MBaud. Auto-detection mode is supported

Specifications

Specification	Description
PROFIBUS Interface	RS-485, Max. 12 Mbps, potential free, according EN 50170
Power Supply	450 mA @ 5Vdc 2 mA @ 24 Vdc
Dimensions	Standard 1756 Single-slot module
Burst	EN 61000-4-4, 2 kV, 5 kHz
Surge	EN 61000-4-5, 2 kV common mode, 1 kV differential mode
ESD	EN 61000-4-2, 4 kV contact, 8 kV air, 4 kV indirect
Radiated/Conducted Immunity	EN 61000-4-3, 10 V/m, 30...1000 MHz, 80% AM, 1 kHz sine wave EN 61000-4-6, 10 V, 0,15...80 MHz
Radiated/Conducted Emission	EN 55011 Class A
Vibration/Shock (operating)	IEC 600068-2-6, 10-500 Hz, ± 0,75 mm, ± 2 g, 1 Octave/min IEC 600068-2-27, 30 g, 11 ms
Operating Temperature	0°C to 60°C (32°F to 140°F)
Relative Humidity	5 to 95% (non-condensing)

To contact Prosoft Technology about PROFIBUS DPV1 Slave for ControlLogix | ILX56-PBS use Get a quote.

The ILX56-PBS PROFIBUS DPV1 Multi-Slave module allows Rockwell Automation® ControlLogix® processors to communicate on a PROFIBUS DP protocol network by emulating up to 10 individual slave devices.

This multi-slave support of the module provides the ability to pass up to 2440 bytes of input and output data as high-speed cyclic I/O data on a PROFIBUS DP network.

Combined with the use of multiple I/O connections back to the ControlLogix processor, this module provides data update rates that will meet even the most demanding of PROFIBUS DP applications.

Features and Benefits

Rockwell Automation Encompass™-Approved Solution
Remote diagnostics via configuration utility with built-in PROFIBUS DP packet capture utility
Multi-slave mode allows module to emulate up to 10 individual slaves for transfer of up to 2440 bytes of cyclic I/O data
Supports DPV1 Acyclic Messaging
Add-On Profile and custom Add-On Routines provided to allow for seamless integration to Studio 5000

Specifications

Specification	Description
Slaves	Emulate up to 10 individual slaves
Input/Output	Maximum 244 Bytes per Slave
Input Data	Maximum 2440 Bytes (244 per slave)
Acyclic Data	DPV1
Status data	88 Bytes
Output data	Maximum 2440 Bytes (244 per slave)
DPV1 Services	Class 1 Read/Write, Class 1 Alarm
Services	Global-Control, Slave-Diagnostic, Set-Parameter
Sync, Freeze Command	Supported
Baud rate	9.6 kBaud, 19.2 kBaud, 45.45 kBaud, 93.75 kBaud, 187.5 kBaud, 500 kBaud, 1.5 MBaud, 3 MBaud, 6 MBaud, 12 MBaud. Auto-detection mode is supported

Specifications

Specification	Description
PROFIBUS Interface	RS-485, Max. 12 Mbps, potential free, according EN 50170
Power Supply	450 mA @ 5Vdc 2 mA @ 24 Vdc
Dimensions	Standard 1756 Single-slot module
Burst	EN 61000-4-4, 2 kV, 5 kHz
Surge	EN 61000-4-5, 2 kV common mode, 1 kV differential mode
ESD	EN 61000-4-2, 4 kV contact, 8 kV air, 4 kV indirect
Radiated/Conducted Immunity	EN 61000-4-3, 10 V/m, 30...1000 MHz, 80% AM, 1 kHz sine wave EN 61000-4-6, 10 V, 0,15...80 MHz
Radiated/Conducted Emission	EN 55011 Class A
Vibration/Shock (operating)	IEC 600068-2-6, 10-500 Hz, ± 0,75 mm, ± 2 g, 1 Octave/min IEC 600068-2-27, 30 g, 11 ms
Operating Temperature	0°C to 60°C (32°F to 140°F)
Relative Humidity	5 to 95% (non-condensing)