EtherNet/IP to Siemens Industrial Ethernet Communication Gateway
EtherNet/IP to Siemens Industrial Ethernet Communication Gateway
EtherNet/IP to Siemens Industrial Ethernet Communication Gateway
EtherNet/IP to Siemens Industrial Ethernet Communication Gateway
EtherNet/IP to Siemens Industrial Ethernet Communication Gateway
EtherNet/IP to Siemens Industrial Ethernet Communication Gateway
Description
Documents
19 Recent ViewsIn Stock
ProSoft Technology’s EtherNet/IP™ to Siemens® Industrial Ethernet communication gateway allows high-speed bi-directional data transfers between EtherNet/IP™-enabled controllers or devices and Siemens® S7 PACs, including S7-200s, S7-300s, S7-400s, S7-1200 and S7-1500 PACs.
In addition, the gateway includes several features, including data prioritization, that allow for simplified integration, reduced commissioning time and optimized performance.
Features and Benefits
Data prioritization: Multiple I/O connections allow you to set RPIs for status and/or control data, optimizing Ethernet bandwidth.
Includes an embedded EDS Add-On Profile, allowing for simplified integration and reduced commissioning time.
Includes a SD card slot (SD card optional) for storing configuration files. This can be used for disaster recovery.
ProSoft Discovery Service: This utility allows your PC to see the gateway and change its default IP address without being on the same subnet.
Secure module configuration via module switch (v1.04 and greater).
Up to 4000 16-bit registers can be used to exchange large amounts of data.
Specifications
EtherNet/IP™ Specifications
Specification
Description
Number of Class 3 Server Connections
5
Supported PLC Types
PLC2, PLC5, SLC, CLX, CMPLX, MICROLX
Supported Message Types
PCCC and CIP
Class 3 Client Connections
Connected - 2
Unconnected - 1
Number of Class 1 I/O Connections
2
I/O connection sizes
248/248
Max RPI time
5 ms per connection
CIP Services Supported
0x4C - CIP Data Table Read
0x4D - CIP Data Table Write
Command List
Support for 100 commands per Client, each configurable for command type, IP address, register to/from addressing and word/bit count.
To contact Prosoft Technology about ProSoft EtherNet/IP to Siemens Industrial Ethernet Communication Gateway use Get a quote.
ProSoft Technology’s EtherNet/IP™ to Siemens® Industrial Ethernet communication gateway allows high-speed bi-directional data transfers between EtherNet/IP™-enabled controllers or devices and Siemens® S7 PACs, including S7-200s, S7-300s, S7-400s, S7-1200 and S7-1500 PACs.
In addition, the gateway includes several features, including data prioritization, that allow for simplified integration, reduced commissioning time and optimized performance.
Features and Benefits
Data prioritization: Multiple I/O connections allow you to set RPIs for status and/or control data, optimizing Ethernet bandwidth.
Includes an embedded EDS Add-On Profile, allowing for simplified integration and reduced commissioning time.
Includes a SD card slot (SD card optional) for storing configuration files. This can be used for disaster recovery.
ProSoft Discovery Service: This utility allows your PC to see the gateway and change its default IP address without being on the same subnet.
Secure module configuration via module switch (v1.04 and greater).
Up to 4000 16-bit registers can be used to exchange large amounts of data.
Specifications
EtherNet/IP™ Specifications
Specification
Description
Number of Class 3 Server Connections
5
Supported PLC Types
PLC2, PLC5, SLC, CLX, CMPLX, MICROLX
Supported Message Types
PCCC and CIP
Class 3 Client Connections
Connected - 2
Unconnected - 1
Number of Class 1 I/O Connections
2
I/O connection sizes
248/248
Max RPI time
5 ms per connection
CIP Services Supported
0x4C - CIP Data Table Read
0x4D - CIP Data Table Write
Command List
Support for 100 commands per Client, each configurable for command type, IP address, register to/from addressing and word/bit count.