The analog 0-10 V I/O module provides two 24-bit inputs and two 16-bit outputs. The I/O modules offer 2500 V r.m.s. isolation, with a wide operating temperature range and Class I Division 2 hazardous location rating, making them ideal for demanding industrial installations.
Connect them to the wireless I/O radios for point-to-point wire replacement applications, or to the RS485 I/O Extension module to add I/O to a Modbus network.
Features and Benefits
Easy to use: No software configuration needed
Easy to install: Mounts onto a 35 mm DIN rail without any tools
Failsafe: User can defines how outputs are failed over when RF or I/O communication is ever lost
Number of Inputs: 2 (24-bit Resolution)
Number of Outputs: 2 (16-bit Resolution)
Isolation Voltage: 2500 V r.m.s.
Accuracy: < 0.1% of Full Scale
FailSafe Modes: Last known value (Default) or Any value on scale
Hardware and System
Specification
Description
DIN Rail Mounting Compatibility
35 mm x 7.5 mm DIN Rail
I/O Module Slave ID Selection
16-Position rotary switch
Built-In Mounting Hardware
Spring-loaded clip-on system
Wire Gauge
Solid / Stranded (AWG) 28-12 gauge
Wire Rating
UL: 300 V RMS, 80 °C and 300 V, 105 °C
CSA: 300 V RMS, 105 °C
Warranty
2-Year limited
²When using more than a 5-Module Combination per Radio, use the Power Budget Calculator to determine maximum I/O Module capacity.
Analog 0-10 V
Specification
Description
Number of Inputs
2 (24-bit Resolution)
Number of Outputs
2 (16-bit Resolution)
Isolation Voltage
2500 V r.m.s.
Signal Range
0 to 10 VDC (10.5 V Max)
Accuracy
< 0.1% of Full Scale
FailSafe Modes
Last Known Value (Def.) or Any value on scale³
AI Input Impedance
40K Ohm
AO Output Impedance
10 Ohm
³Requires Advanced User Interface to set a specific value on Analog I/O Module.
To contact Prosoft Technology about Analog I/O Module 0-10 V use Get a quote.
The analog 0-10 V I/O module provides two 24-bit inputs and two 16-bit outputs. The I/O modules offer 2500 V r.m.s. isolation, with a wide operating temperature range and Class I Division 2 hazardous location rating, making them ideal for demanding industrial installations.
Connect them to the wireless I/O radios for point-to-point wire replacement applications, or to the RS485 I/O Extension module to add I/O to a Modbus network.
Features and Benefits
Easy to use: No software configuration needed
Easy to install: Mounts onto a 35 mm DIN rail without any tools
Failsafe: User can defines how outputs are failed over when RF or I/O communication is ever lost
Number of Inputs: 2 (24-bit Resolution)
Number of Outputs: 2 (16-bit Resolution)
Isolation Voltage: 2500 V r.m.s.
Accuracy: < 0.1% of Full Scale
FailSafe Modes: Last known value (Default) or Any value on scale
Hardware and System
Specification
Description
DIN Rail Mounting Compatibility
35 mm x 7.5 mm DIN Rail
I/O Module Slave ID Selection
16-Position rotary switch
Built-In Mounting Hardware
Spring-loaded clip-on system
Wire Gauge
Solid / Stranded (AWG) 28-12 gauge
Wire Rating
UL: 300 V RMS, 80 °C and 300 V, 105 °C
CSA: 300 V RMS, 105 °C
Warranty
2-Year limited
²When using more than a 5-Module Combination per Radio, use the Power Budget Calculator to determine maximum I/O Module capacity.
Analog 0-10 V
Specification
Description
Number of Inputs
2 (24-bit Resolution)
Number of Outputs
2 (16-bit Resolution)
Isolation Voltage
2500 V r.m.s.
Signal Range
0 to 10 VDC (10.5 V Max)
Accuracy
< 0.1% of Full Scale
FailSafe Modes
Last Known Value (Def.) or Any value on scale³
AI Input Impedance
40K Ohm
AO Output Impedance
10 Ohm
³Requires Advanced User Interface to set a specific value on Analog I/O Module.