Innovec Additive Injection Manifold | IAM Get latest price

Innovec Additive Injection Manifold | IAM

35 Recent Views In Stock

The modern compact design which consists of an oval gear flow meter, solenoid valve and series filter becomes a primary element in the blending system and offers easy installation and maintenance.

Features

• Oval gear flow meter
• Low cost - High performance
• In line filter
• Single pulse train NPN output or optional quadrature NPN output
• 316 stainless steel
• Three models from 0.5 - 100 litres per hour, to 120 – 1800 litres per hour
• Typical applications include putting additives in fuels, chemical dosing and ink injection

 

Manifold	Model 1	Model 2	Model 3
Construction	316 Stainless steel
Process Connection	Threaded Type G or NPT
	Needle Valve for fine adjustment of flow rate
Options	Non return valve
	Threaded ports for the fitting of pressure or temperature sensors
Inlet / Outlet port size	¼ inch	¼ inch	½ inch
Dimensions	150 x 65 x 120mm	150 x 65 x 120mm	175 x 80 x 130mm

 

Flow meter

Flow rates	0.5 – 100 litres per hour 0.13 – 26.4 gallons per hour		15-500 litres per hour 4-132 gallons per hour		2-30 Litres per Minute 0.5- 8 gallons per minute
Accuracy	+/- 0.5% (+/- 0.25% with a reduced range)
Repeatability	+/- 0.03%
Maximum Pressure	2000 PSI
K factor	1000 pulses per litre	400 Pulses per Litre		112 Pulses per Litre
High resolution	4000 pulses per litre	800 pulses per litre		224 pulses per litre

 

Output Signal

Standard	Reed or Hall Effect (NPN Open collector
High Resolution	Hall Effect Integrated Circuit, Omni Polar
Hazardous Ex: Intrinsically safe	NPN Open Collector-Approved ATEX, FM, CSA Namur – Approved ATEX, FM, CSA

 

In Line Filter

Construction	316 Stainless Steel
Mesh Size	74 Micron (200 Mesh)	74 Micron (200 Mesh)	250 Micron (60 Mesh)

 

Solenoid

Supply Voltage	12VDC, 24VDC, 120VACand 240VAC
Hazardous EX	Available with Ex approvals (EX IA)

Read more...

To contact Innovec Controls about Innovec Additive Injection Manifold | IAM use Get a quote.

The modern compact design which consists of an oval gear flow meter, solenoid valve and series filter becomes a primary element in the blending system and offers easy installation and maintenance.

Features

• Oval gear flow meter
• Low cost - High performance
• In line filter
• Single pulse train NPN output or optional quadrature NPN output
• 316 stainless steel
• Three models from 0.5 - 100 litres per hour, to 120 – 1800 litres per hour
• Typical applications include putting additives in fuels, chemical dosing and ink injection

 

Manifold	Model 1	Model 2	Model 3
Construction	316 Stainless steel
Process Connection	Threaded Type G or NPT
	Needle Valve for fine adjustment of flow rate
Options	Non return valve
	Threaded ports for the fitting of pressure or temperature sensors
Inlet / Outlet port size	¼ inch	¼ inch	½ inch
Dimensions	150 x 65 x 120mm	150 x 65 x 120mm	175 x 80 x 130mm

 

Flow meter

Flow rates	0.5 – 100 litres per hour 0.13 – 26.4 gallons per hour		15-500 litres per hour 4-132 gallons per hour		2-30 Litres per Minute 0.5- 8 gallons per minute
Accuracy	+/- 0.5% (+/- 0.25% with a reduced range)
Repeatability	+/- 0.03%
Maximum Pressure	2000 PSI
K factor	1000 pulses per litre	400 Pulses per Litre		112 Pulses per Litre
High resolution	4000 pulses per litre	800 pulses per litre		224 pulses per litre

 

Output Signal

Standard	Reed or Hall Effect (NPN Open collector
High Resolution	Hall Effect Integrated Circuit, Omni Polar
Hazardous Ex: Intrinsically safe	NPN Open Collector-Approved ATEX, FM, CSA Namur – Approved ATEX, FM, CSA

 

In Line Filter

Construction	316 Stainless Steel
Mesh Size	74 Micron (200 Mesh)	74 Micron (200 Mesh)	250 Micron (60 Mesh)

 

Solenoid

Supply Voltage	12VDC, 24VDC, 120VACand 240VAC
Hazardous EX	Available with Ex approvals (EX IA)

Read less...

To contact Innovec Controls about Innovec Additive Injection Manifold | IAM use Get a quote.