Cassel - Metal Detector PSQ RA | Conveyor Belt Metal Detector Get latest price

Metal Detector PSQ RA | Conveyor Belt Metal Detector

Metal Detector PSQ RA | Conveyor Belt Metal Detector

In Stock

• Extremly resistant to weather, dirt or impact of stones and also immune to vibration
• Simple and timesaving mounting: belt must not be devided due to a devidable probe
• Can be used in the proximitry of frequency converters
• Low difference in sensitivity on different sensing heights above the belt
• CE-certified

Features

• Average sensitivity (from M40 nuts)
• Nearly homogeneous sensitivity on the belt and in the upper layers of the product
• Can be used close to frequency converters, only 1 m minimum distance between probe and motors or magnets
• Passage widths from 1 m to 2.4 m and heights can be adjusted as required
• Extremely robust design
• Very simple operation
• Monitoring and display of internal parameters. (Helpful when calling for telephone support)

Function

The PSQ RA series of metal detector (opterating with a frame-probe) detects all kinds of metal, which means not only iron, but also aluminium, stainless steel, copper or mild steel.

The specialty of this detector is a low difference between edge and center of probe aperture. Therefore it is especially suitable if the depth of burden on the belt is more tan 600 mm. It’s frame can be devided and easily be built around the belt.

This metal detector prevents damage, avoids downtimes and produces significant savings on repair costs.

Specifications

• Electronics
  Digital signal processor, noise filter, digital balance control, digital frequency control, PowerDrive circuit
• Input Signals
  1 coaxial cable, probe
• Output Signals
  Metal alarm: 1 relais with 2 floating changeover contacts, switching capacity 230 V 5 A resistive load, switchable between normally relaxed or normally activated mode, Fault signal: 1 relais with 2 floating changeover contacts, switching capacity 230 V, 5 A resistive mode
• Metal Detection
  Iron, non-ferrous (e.g. aluminium or copper) und stainless steel
• Belt widths
  1000 – 2400 mm
• Protection Type
  Control box: IP 55, Frame probe: IP76
• Ambience
  Control box: -20° C up to +55° C, Frame probe: for execution PE up to +60° C, for execution PA6.6 up to +120° C
• Power Supply
  110-230 V, 50/60 Hz, typ. comsumption 15 VA
• Material
  Control box: steel or stainless steel, grey RAL 7032, electrophoretic dipcoating, Frame probe: stainless u-structure steel, Support for mounting: PE or PA6.66

Delivery Scope

• Detection unit (sensor) PSQ RA
• Controller in steel or stainless steel housing (wall mounting, 14 kg)

Application

• Protection of tools and machines from metal parts such as nails or screws
• Monitoring of particularly large and heavy products in recycling, mining or slag processing

Read more...

To contact OFI Weigh & Inspection about Cassel Metal Detector PSQ RA | Conveyor Belt Metal Detector use Get a quote.

• Extremly resistant to weather, dirt or impact of stones and also immune to vibration
• Simple and timesaving mounting: belt must not be devided due to a devidable probe
• Can be used in the proximitry of frequency converters
• Low difference in sensitivity on different sensing heights above the belt
• CE-certified

Features

• Average sensitivity (from M40 nuts)
• Nearly homogeneous sensitivity on the belt and in the upper layers of the product
• Can be used close to frequency converters, only 1 m minimum distance between probe and motors or magnets
• Passage widths from 1 m to 2.4 m and heights can be adjusted as required
• Extremely robust design
• Very simple operation
• Monitoring and display of internal parameters. (Helpful when calling for telephone support)

Function

The PSQ RA series of metal detector (opterating with a frame-probe) detects all kinds of metal, which means not only iron, but also aluminium, stainless steel, copper or mild steel.

The specialty of this detector is a low difference between edge and center of probe aperture. Therefore it is especially suitable if the depth of burden on the belt is more tan 600 mm. It’s frame can be devided and easily be built around the belt.

This metal detector prevents damage, avoids downtimes and produces significant savings on repair costs.

Specifications

• Electronics
  Digital signal processor, noise filter, digital balance control, digital frequency control, PowerDrive circuit
• Input Signals
  1 coaxial cable, probe
• Output Signals
  Metal alarm: 1 relais with 2 floating changeover contacts, switching capacity 230 V 5 A resistive load, switchable between normally relaxed or normally activated mode, Fault signal: 1 relais with 2 floating changeover contacts, switching capacity 230 V, 5 A resistive mode
• Metal Detection
  Iron, non-ferrous (e.g. aluminium or copper) und stainless steel
• Belt widths
  1000 – 2400 mm
• Protection Type
  Control box: IP 55, Frame probe: IP76
• Ambience
  Control box: -20° C up to +55° C, Frame probe: for execution PE up to +60° C, for execution PA6.6 up to +120° C
• Power Supply
  110-230 V, 50/60 Hz, typ. comsumption 15 VA
• Material
  Control box: steel or stainless steel, grey RAL 7032, electrophoretic dipcoating, Frame probe: stainless u-structure steel, Support for mounting: PE or PA6.66

Delivery Scope

• Detection unit (sensor) PSQ RA
• Controller in steel or stainless steel housing (wall mounting, 14 kg)

Application

• Protection of tools and machines from metal parts such as nails or screws
• Monitoring of particularly large and heavy products in recycling, mining or slag processing

Read less...

To contact OFI Weigh & Inspection about Cassel Metal Detector PSQ RA | Conveyor Belt Metal Detector use Get a quote.

CASSEL-Metal-detector-PSQ-DS-UN-200622(0.30MB)

CASSEL-Metal-detector-PSQ-DS-EN-200622(0.31MB)