Cassel Food Metal Detector | Metal Shark® ...

Cassel - Food Metal Detector | Metal Shark® Fl & Fl Compact

Supplier: OFI Weigh & Inspection

Food Metal Detector | Metal Shark® Fl & Fl Compact

The Metal Shark® Fl & Fl Compact is a cutting-edge metal detection solution specifically designed for the food industry.

Reliably detects magnetic and non-magnetic metals in fabrics and webs
Particularly flat for optimal approach to ascending or descending product paths, FL compact additionally rotatable
Highest sensitivity with 4-quadrant technology
Intuitive control and easy installation with autocalibration and TeachAssistant
Maintenance-free with automatic balance and calibration control

Features

Maximum detection performance with highest reliability in the entire detection area due to 4-quadrant technology
IFS and HACCP reports easily available on the display at the touch of a button
Cyclical function monitoring with Performance Validation System (PVS)
Optionally: Data transfer to USB interface or connection to the company net-work via SHARKNET^® software
Simple setup with TeachAssistant
Memory for up to 250 products
Easy to use with intuitive and multilingual menus
4-level password system, automatic log out after time lapse

Function

The METAL SHARK^® FL and FL compact metal detectors are usually used for the inspection of nonwovens, textiles and films.

Both detectors are particularly flat and available in widths of 1,000 – 4,000 mm. The FL compact is rotatably mounted so that it can also be adapted to sloping webs.

Due to the high sensitivity of the FL models, tiny magnetic and non-magnetic metal particles (e.g. iron, aluminium and stainless steel) are detected over the entire width.

Specifications

Electronics
Digital signal processor, noise filter, digital balance control, digital frequency control, PowerDrive circuit
Input
2 analogue 0…10 V DC (option: 4-20 mA) 8 freely configurable 24 V DC signals, e.g. for encoders, product recognition, buttons
Output
2 floating: “error” and “metal” 8 freely configurable 24 V DC signals]
Inspection method
High-frequency magnetic field, multi-channel operation, balanced receiver coils
Metal detection
Ferrous, non-ferrous (e.g. aluminium, lead etc.) and stainless steel
Product compensation
250 memory locations, automatic product compensation, with TeachAssistant
Enclosure rating
Controller IP65, sensor IP54 (optionally IP66)
Environmental conditions
Controller: -20°C to +40°C / -4°F to +104°F, optionally to -40°C / -40°F or +55°C / 131°F, rel. humidity 20% to 90% (non-condensing) Sensor: -30°C to +60°C / -22°F to 140°F, optionally up to +90°C / 194°F
Temperature of goods inspected
Standard: -30°C to +40°C /-22°F to +104°F Optionally: -40°C to +60°C / -40°F to 140°F
Temperature of goods inspected
Standard: -30°C up to 55°C / -22°F up to 131°F option: -40°C / -40°F or up to 120°C / 248°F or up to 180°C / 356°F
Power supply
1 phase 110-230 V AC +/- 5%, 20 W typ. (60 W max.)
Interface
RS232, LAN (optional, for SHARKNET®), USB (optional)
Maintenance
Maintenance-free, sensors calibrate themselves
Diagnostics
Integrated diagnostic software, automatic self-test

Accessories & Extras

The METAL SHARK^® FL and FL compact detectors can be perfectly adapted to your production with various special designs and accessories.

Different temperature requirements are taken into account as well as complicated product requirements for metal detection.

SHARKNET®
The SHARKNET® software connects METAL SHARK® metal detectors with a central computer, providing centralized storage of all operating data plus batch and alarm documentation for HACCP and IFS compliance.
LPW/HPW
Increase of the IP protection class by adapting the sensor seal, installing additional seals and a double housing for the control electronics
Temperature extension cold
Temperature range extended to -40°C (-40° F) Resin seals remain elastic at low temperatures. Special insulation, heated enclosure and other features.
Temperature extension hot
Temperature range extended to +55° C, (+131° F) Adapted enclosure, additional thermal insulation, replaceable filter fan, heat exchanger and/or active cooling units.
High temperature extension for product
Goods temperature up to +120°C (248° F) max. This option provides IP54 grade enclosure for the sensor.
Signalling devices (optical/acoustic)
Stacking lights and signal horns/sirens available in different versions and IP protection classes

Delivery Scope

Detection unit (Sensor) FL or FL compact
Control unit METAL SHARK^® in stainless steel housing with separate wall mounting

Application

Monitoring of fabric, nonwoven or even synthetic webs
Quality assurance for incoming goods, outgoing goods or during running production
Machine or end user protection, e.g. against needle breakage

Specifications

Electronics
Digital signal processor, noise filter, digital balance control, digital frequency control, PowerDrive circuit
Input
2 analogue 0…10 V DC (option: 4-20 mA) 8 freely configurable 24 V DC signals, e.g. for encoders, product recognition, buttons
Output
2 floating: “error” and “metal” 8 freely configurable 24 V DC signals]
Inspection method
High-frequency magnetic field, multi-channel operation, balanced receiver coils
Metal detection
Ferrous, non-ferrous (e.g. aluminium, lead etc.) and stainless steel
Product compensation
250 memory locations, automatic product compensation, with TeachAssistant
Enclosure rating
Controller IP65, sensor IP54 (optionally IP66)
Environmental conditions
Controller: -20°C to +40°C / -4°F to +104°F, optionally to -40°C / -40°F or +55°C / 131°F, rel. humidity 20% to 90% (non-condensing) Sensor: -30°C to +60°C / -22°F to 140°F, optionally up to +90°C / 194°F
Temperature of goods inspected
Standard: -30°C to +40°C /-22°F to +104°F Optionally: -40°C to +60°C / -40°F to 140°F
Temperature of goods inspected
Standard: -30°C up to 55°C / -22°F up to 131°F option: -40°C / -40°F or up to 120°C / 248°F or up to 180°C / 356°F
Power supply
1 phase 110-230 V AC +/- 5%, 20 W typ. (60 W max.)
Interface
RS232, LAN (optional, for SHARKNET®), USB (optional)
Maintenance
Maintenance-free, sensors calibrate themselves
Diagnostics
Integrated diagnostic software, automatic self-test

Accessories & Extras

The METAL SHARK^® FL and FL compact detectors can be perfectly adapted to your production with various special designs and accessories.

Different temperature requirements are taken into account as well as complicated product requirements for metal detection.

SHARKNET®
The SHARKNET® software connects METAL SHARK® metal detectors with a central computer, providing centralized storage of all operating data plus batch and alarm documentation for HACCP and IFS compliance.
LPW/HPW
Increase of the IP protection class by adapting the sensor seal, installing additional seals and a double housing for the control electronics
Temperature extension cold
Temperature range extended to -40°C (-40° F) Resin seals remain elastic at low temperatures. Special insulation, heated enclosure and other features.
Temperature extension hot
Temperature range extended to +55° C, (+131° F) Adapted enclosure, additional thermal insulation, replaceable filter fan, heat exchanger and/or active cooling units.
High temperature extension for product
Goods temperature up to +120°C (248° F) max. This option provides IP54 grade enclosure for the sensor.
Signalling devices (optical/acoustic)
Stacking lights and signal horns/sirens available in different versions and IP protection classes

Delivery Scope

Detection unit (Sensor) FL or FL compact
Control unit METAL SHARK^® in stainless steel housing with separate wall mounting

Application

Monitoring of fabric, nonwoven or even synthetic webs
Quality assurance for incoming goods, outgoing goods or during running production
Machine or end user protection, e.g. against needle breakage

Read less...

To contact OFI Weigh & Inspection about Cassel Food Metal Detector | Metal Shark® Fl & Fl Compact use Get a quote.

CASSEL-Metal-detector-FL-DS-US-200709(0.26MB)

CASSEL-Metal-detector-FL-DS-EN-200709(0.30MB)

Let OFI Weigh & Inspection provide you with a quote

Supplier

Get a quote

Supplier: OFI Weigh & Inspection

Distribution: Australia & New Zealand

Location: Hoppers Crossing, VIC

Customers: Fonterra, Bega, Mondelez, IFF, Qantas, Toll, Amazon

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. OFI Weigh & Inspection are also proudly displaying these credentials:

Established:

2015

Employees:

6-20

Customers:

Fonterra, Bega, Mondelez, IFF, Qantas, Toll, Amazon

Memberships:

NMI, NATA, BRC

Distribution:

Australia & New Zealand

Location:

Hoppers Crossing , VIC