Cassel - Food Metal Detector | Metal Shark® Combi Tu Get latest price

• Electronics
  Digital signal processor, digital frequency generation, digital balance control, automatic calibration, digital noise filters, integrated flexible control functions
• Input Signals
  2 analogue 0…10 VDC (option: 4-20 mA), 8 freely configurable 24 V DC signals, e.g. for encoders, product recognition, buttons
• Output Signals
  2 potential-free changeover contacts: “Error” and “Metal”, 8 freely configurable 24 V DC signals, e.g. solenoid valve, optical/acoustic alarm
• Inspection Method
  High-frequency magnetic field, multi-channel operation, balanced receiver coils
• Metal detection
  Iron, non-ferrous (e.g. aluminium, lead etc.) and stainless steel
• Product compensation
  250 memory spaces, automatic product compensation, with TeachAssistant
• Protection type
  IP 65, optional IP66 or IP67
• Ambience
  Standard: -10° C up to +40° C, rel. humidity 30% to 80% (non-condensing), option: down to -40° C or up to +55° C
• Product temperature
  Standard: -30° C up to +40° C, optional: -40° C or up to +60° C
• Power Supply
  1 phase 110-240 VAC, 50/60 Hz, 20 W typ. (60 W max.)
• Power Supply
  230V AC +/-5%, 50/60Hz, 4A (8A max.) or 400V AC +/-5%, 50/60Hz, 4A (10A max.))
• Interface
  RS232, LAN (optional, for SHARKNET), USB (optional)
• Maintenance
  Maintenance-free, sensors calibrate themselves
• Diagnostics
  Integrated diagnostic software, automatic self-test
• Inspection widths
  1,000 mm to 5,000 mm (standard), up to 7,000 mm (optional)
• Aperture height
  28 mm net, The maximum panel thickness of the product depends on the thickness of the product and the deflection, the sum of which must not exceed the net passage height. Example: Net passage height 28 mm – panel thickness 8 mm = max. 20 mm panel deflection
• Sensitivities
  FE 0.6 mm, Al 0.8 mm, SS 0.7 mm - (The sensitivities are highly dependent on the environment in which a metal detector is installed. The sensitivities mentioned here should therefore only be considered as guide values).

Accessories & Extras

The METAL SHARK^® COMBI can be perfectly adapted to your production by various special designs and accessories. Different numbers of sensor plates and widths um to 7,000 mm are possible as well as swiveling traverse arms or an adjustable travrse height.

For your audit reliability, a Performance Verification Certificate can be issued by CASSEL service technicians during commissioning or maintenance.

• SHARKNET®
  The SHARKNET® software connects METAL SHARK® metal detectors to a central computer and offers central storage of all operating data as well as batch and alarm documentation for HACCP and IFS conformity.
• AutoSens
  Signal transfer of belt speed and mat height from the system control for automatic adjustment of the detector sensitivity.
• Temperature extension cold
  Temperature range extended to -40°C, cold-elastic grouting material, insulation, switch cabinet heating and other measures.
• Temperature extension hot
  Temperature range extended to +55° C, adaptation of control cabinet, additional thermal insulation, replacement of filter fan, heat exchanger and/or active cooling units.
• High temperature extension for product
  Product temperature up to max. +120°C, with this option, the sensor has protection class IP54.
• Fast Power Drive (FPD)
  Significantly improves metal detection and reliability in industrial environments that do not meet electromagnetic compatibility standards, with different IP protection classes and ATEX Zone 22 possible.
• Super Power Drive (SPD)
  Improves metal detection by -0.5 to -1 mm in industrial environments that do not meet the standards for electromagnetic compatibility, with various IP protection classes and ATEX Zone 22 possible.
• Signalling devices (optical/acoustic)
  Stacking lights and signal horns/sirens available in different versions and IP protection classes.