Cassel - Metal Detector | Metal Shark® GF

Metal Detector | Metal Shark® GF

Metal Detector | Metal Shark® GF

Metal Detector | Metal Shark® GF

Metal Shark® GF

• Reliably detects metals in free-falling goods
• Simple assembly due to mounting frame and quick release rings
• Highest sensitivity with 4-quadrant technology
  Autocalibration and TeachAssistant for intuitive control and easy installation
• Maintenance-free through automatic balance and calibration control
• ATEX-version for use in explosion endangered environments
• BRC-Kit option: Conformity with the Global Standard of the British Retail Consortium (BRC) for food safety

Features

• Maximum inspection performance with highest reliability in the entire detection area due to 4-quadrant technology
• Documentation of all events and metal messages
• Simple setup with Teach Assistant, pre-set product types like salty, sweet, wet, dry etc.
• IFS and HACCP reports available on the display at the simple push of a button
• Memory for up to 250 products
• Optional: Data transfer to USB interface or connection to the company network via SHARKNET^® software
• Easy to use with intuitive and multilingual menus
• Cyclical function monitoring with Performance Validation System (PVS)
• 4-level password system, automatic log out after time lapse

Function

The METAL SHARK^® GF (Gravity Feed) is used for pipelines with free-falling products to detect metal contamination in continuously flowing granulates or powders such as sugar, flour, grain or even plastic granules.

The sensitive sensors detect the smallest metal contaminants, and fast-switching separation flaps discharge them directly from the product stream during ongoing production.

Specifications

• Electronics
  Digital signal processor, digital frequency generation, digital balance control, automatic calibration, digital noise filters, integrated flexible control functions
• Input
  2 analog 0…10 V DC (option: 4-20 mA) 8 freely configurable 24 V DC signals, e.g. for reject confirmation
• Output
  2 floating: “error” and “metal” 8 freely configurable 24 V DC signals, e.g. for metal or acoustic alarm
• Inspection method
  High-frequency magnetic field, multi-channel operation, symmetrical receiver coils
• Metal detection
  Ferrous, non-ferrous (e.g. aluminium or copper) und stainless steel
• Product compensation
  Memory for up to 250 products, automatic product compensation, with TeachAssistant
• Enclosure rating
  IP65 (optionally IP66)
• Environmental conditions for controller
  -30°C to +40°C / -22°F to 104°F, UL version: -20°C to +40°C / -4°F to 104°F, rel. humidity 20% up to 90% (non-condensing) Option: -40°C / -40°F or +55°C / 131°F
• Environmental conditions for sensor
  -30°C to +60°C / -22°F to 140°F Option: up to +90° C / 194°F
• Temperature of goods inspected
  Standard: -30°C up to 55°C / -22°F up to 131°F Option: -40°C / -40°F or up to 120°C / 248°F or up to 180°C / 356°F
• Power supply
  One phase 110-230 V AC, typ. consumption 20 W (max. 60 W)
• Interface
  RS232, provides documentation according to HACCP- and IFS-standard, USB- or ethernet option
• Maintenance
  Maintenance-free, self calibrating sensors
• Diagnostics
  Integrated diagnostic software, automatic self-test

Read more...

To contact OFI Weigh & Inspection about Cassel Metal Detector | Metal Shark® GF use Get a quote.

Metal Shark® GF

• Reliably detects metals in free-falling goods
• Simple assembly due to mounting frame and quick release rings
• Highest sensitivity with 4-quadrant technology
  Autocalibration and TeachAssistant for intuitive control and easy installation
• Maintenance-free through automatic balance and calibration control
• ATEX-version for use in explosion endangered environments
• BRC-Kit option: Conformity with the Global Standard of the British Retail Consortium (BRC) for food safety

Features

• Maximum inspection performance with highest reliability in the entire detection area due to 4-quadrant technology
• Documentation of all events and metal messages
• Simple setup with Teach Assistant, pre-set product types like salty, sweet, wet, dry etc.
• IFS and HACCP reports available on the display at the simple push of a button
• Memory for up to 250 products
• Optional: Data transfer to USB interface or connection to the company network via SHARKNET^® software
• Easy to use with intuitive and multilingual menus
• Cyclical function monitoring with Performance Validation System (PVS)
• 4-level password system, automatic log out after time lapse

Function

The METAL SHARK^® GF (Gravity Feed) is used for pipelines with free-falling products to detect metal contamination in continuously flowing granulates or powders such as sugar, flour, grain or even plastic granules.

The sensitive sensors detect the smallest metal contaminants, and fast-switching separation flaps discharge them directly from the product stream during ongoing production.

Specifications

• Electronics
  Digital signal processor, digital frequency generation, digital balance control, automatic calibration, digital noise filters, integrated flexible control functions
• Input
  2 analog 0…10 V DC (option: 4-20 mA) 8 freely configurable 24 V DC signals, e.g. for reject confirmation
• Output
  2 floating: “error” and “metal” 8 freely configurable 24 V DC signals, e.g. for metal or acoustic alarm
• Inspection method
  High-frequency magnetic field, multi-channel operation, symmetrical receiver coils
• Metal detection
  Ferrous, non-ferrous (e.g. aluminium or copper) und stainless steel
• Product compensation
  Memory for up to 250 products, automatic product compensation, with TeachAssistant
• Enclosure rating
  IP65 (optionally IP66)
• Environmental conditions for controller
  -30°C to +40°C / -22°F to 104°F, UL version: -20°C to +40°C / -4°F to 104°F, rel. humidity 20% up to 90% (non-condensing) Option: -40°C / -40°F or +55°C / 131°F
• Environmental conditions for sensor
  -30°C to +60°C / -22°F to 140°F Option: up to +90° C / 194°F
• Temperature of goods inspected
  Standard: -30°C up to 55°C / -22°F up to 131°F Option: -40°C / -40°F or up to 120°C / 248°F or up to 180°C / 356°F
• Power supply
  One phase 110-230 V AC, typ. consumption 20 W (max. 60 W)
• Interface
  RS232, provides documentation according to HACCP- and IFS-standard, USB- or ethernet option
• Maintenance
  Maintenance-free, self calibrating sensors
• Diagnostics
  Integrated diagnostic software, automatic self-test

Read less...

To contact OFI Weigh & Inspection about Cassel Metal Detector | Metal Shark® GF use Get a quote.