Yilmaz Aluminium Upcut Mitre Saw | ACK420 ...
The Yilmaz ACK420 Aluminium Up-Cut Mitre Saw is the ideal replacement for drop saws & is accepted in many countries around the world as it is the correct machine for aluminium profile cutting. Due to the high level of safety offered by this type of machine the ACK420 meets or exceeds Australian Safety standards for sawing machines.
Constructed from high quality material the ACK420 is a robust machine capable of highly accurate cutting of aluminium profiles and solids. The ACK420 uses components from suppliers such as Festo & Schnider Electrics.
Due to the smart design of the ACK420 some common problems of drop saws can be eliminated. Off cuts which are normally thrown by drop saws are not a problem on this type of machine. The clamps are able to be set very close to the blade allowing even very short off cuts to be clamped. Clamps are pneumatic and are pressure regulated.
Blade feed is controlled via a Hydro-pneumatic feed system and is fully adjustable. The motor is a sealed induction motor with Hi Torque continuous output.
Angle can be set quickly with a similar system to conventional drop saws which use a locating pin.
This machine is ideal for people who are serious about cutting aluminium and workplace safety.
Features
Made in Europe by Yilmaz Machinery
Technical
ACK420 | |
---|---|
Motor KW | 2.2 KW |
Volt/Freq/Amp | 415v (3A+E) /50/6 |
Blade Diameter / Bore | 420mm / 30mm |
Spindle RPM | 3000 RPM |
Air Consumption | 36 Lt/minute |
Air Pressure | 6 Bar |
Air Connector | Nitto Male |
Table Height (mm) | 900mm |
Machine Dimensions (mm) (Width x Depth x Height) |
770 x 960 x 1320mm |
Packing Dimensions (cm) (Length x Width x Height) |
105 x 87 x 150cm |
Net Weight (KG) | 235kg |
Gross Weight (KG) | 270kg |
To contact Luna Machinery about Yilmaz Aluminium Upcut Mitre Saw | ACK420 use Get a quote.
The Yilmaz ACK420 Aluminium Up-Cut Mitre Saw is the ideal replacement for drop saws & is accepted in many countries around the world as it is the correct machine for aluminium profile cutting. Due to the high level of safety offered by this type of machine the ACK420 meets or exceeds Australian Safety standards for sawing machines.
Constructed from high quality material the ACK420 is a robust machine capable of highly accurate cutting of aluminium profiles and solids. The ACK420 uses components from suppliers such as Festo & Schnider Electrics.
Due to the smart design of the ACK420 some common problems of drop saws can be eliminated. Off cuts which are normally thrown by drop saws are not a problem on this type of machine. The clamps are able to be set very close to the blade allowing even very short off cuts to be clamped. Clamps are pneumatic and are pressure regulated.
Blade feed is controlled via a Hydro-pneumatic feed system and is fully adjustable. The motor is a sealed induction motor with Hi Torque continuous output.
Angle can be set quickly with a similar system to conventional drop saws which use a locating pin.
This machine is ideal for people who are serious about cutting aluminium and workplace safety.
Features
Made in Europe by Yilmaz Machinery
Technical
ACK420 | |
---|---|
Motor KW | 2.2 KW |
Volt/Freq/Amp | 415v (3A+E) /50/6 |
Blade Diameter / Bore | 420mm / 30mm |
Spindle RPM | 3000 RPM |
Air Consumption | 36 Lt/minute |
Air Pressure | 6 Bar |
Air Connector | Nitto Male |
Table Height (mm) | 900mm |
Machine Dimensions (mm) (Width x Depth x Height) |
770 x 960 x 1320mm |
Packing Dimensions (cm) (Length x Width x Height) |
105 x 87 x 150cm |
Net Weight (KG) | 235kg |
Gross Weight (KG) | 270kg |
To contact Luna Machinery about Yilmaz Aluminium Upcut Mitre Saw | ACK420 use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product