Yilmaz Aluminium Cutting Mitre Saw | KD308 ...
The KD308 is a great little aluminium saw designed for general purpose aluminium cutting of small profiles. The 300mm blade, pneumatic clamps and blade lubricator help to give consistent & accurate quality cut finishes.
Couple with our roller conveyor kits & measuring Stops for the ultimate setup!
The KD308 is out entry level consumer Aluminium Mitre Saw designed for accurate, light duty aluminium cutting. The KD308 comes equipped with 2 x Pneumatic Clamps, The 300mm blade stays sharp thanks to the built in “Venturi” Spray Mist lubricator system.
Key Features
Made in Europe by Yilmaz Machinery
Technical
KD308 | |
---|---|
Motor KW | 800W |
Volt/Freq/Amp | 240v/50/3.5 Amp |
Blade Diameter / Bore | 300mm / 30mm |
Spindle RPM | 3000 RPM |
Air Consumption | 21 Lt/minute |
Air Pressure | 6 Bar |
Air Connector | Nitto Male |
Table Height (mm) | 900mm |
Machine Dimensions (mm) (Width x Depth x Height) |
570 x 600 x 1370mm |
Packing Dimensions (cm) (Length x Width x Height) | TBA |
Net Weight (KG) | 55KG |
Gross Weight (KG) | 75KG |
To contact Luna Machinery about Yilmaz Aluminium Cutting Mitre Saw | KD308 use Get a quote.
The KD308 is a great little aluminium saw designed for general purpose aluminium cutting of small profiles. The 300mm blade, pneumatic clamps and blade lubricator help to give consistent & accurate quality cut finishes.
Couple with our roller conveyor kits & measuring Stops for the ultimate setup!
The KD308 is out entry level consumer Aluminium Mitre Saw designed for accurate, light duty aluminium cutting. The KD308 comes equipped with 2 x Pneumatic Clamps, The 300mm blade stays sharp thanks to the built in “Venturi” Spray Mist lubricator system.
Key Features
Made in Europe by Yilmaz Machinery
Technical
KD308 | |
---|---|
Motor KW | 800W |
Volt/Freq/Amp | 240v/50/3.5 Amp |
Blade Diameter / Bore | 300mm / 30mm |
Spindle RPM | 3000 RPM |
Air Consumption | 21 Lt/minute |
Air Pressure | 6 Bar |
Air Connector | Nitto Male |
Table Height (mm) | 900mm |
Machine Dimensions (mm) (Width x Depth x Height) |
570 x 600 x 1370mm |
Packing Dimensions (cm) (Length x Width x Height) | TBA |
Net Weight (KG) | 55KG |
Gross Weight (KG) | 75KG |
To contact Luna Machinery about Yilmaz Aluminium Cutting Mitre Saw | KD308 use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product