Tsurumi - Sludge & Slurry Pump | KRS2-100-53 Get latest price

Features of this product

• Electric submersible pump
• Protection class IP68
• Depth of submersion max. 30m
• Impeller Type: Open type impeller with Agitator
• Solids Handling: Max. solid handling 30 mm
• Liquid:  Suitable for sludge, slurry, liquids containing sandy mud and bentonite
• Electric Motor: Dry-type submersible induction motor, Insulation class B 4 poles, 1440 rpm
• DOL: Direct on line start
• Voltage: 380V – 415V, 50Hz, three phase
• P1 Power input: 7,5kW , P2 Power output: 6,0kW
• Full Load Current:  13,0 Amps
• Start current: 93,0 Amps
• Electric Cable 20 meters  H07RN-F 4Cx2,5mm2
• Motor Protection: Circle thermal protector (snap-action bi-metal device)
• Shaft Seal: Double mechanical seal in oil bath additional lubrication by oil lifting device
• Primary Seal: silicon carbide on silicon carbide
• Secondary Seal: silicon carbide on silicon carbide
• Bearings: Shielded ball bearings, maintenance-free
• Materials
• Impeller: Chromium iron casting
• Agitator: Chromium iron casting
• Casing: FC200 (EN-GJL-200)
• Suction Plate: Chromium iron casting
• Motor frame: FC150 (EN-GJL-150)
• Shaft: SUS420J2 (EN-X30Cr13)
• Discharge Connection: 100mm hose tail

To contact Pumps and Pipes about Tsurumi Sludge & Slurry Pump | KRS2-100-53 use Get a quote.

Features of this product

• Electric submersible pump
• Protection class IP68
• Depth of submersion max. 30m
• Impeller Type: Open type impeller with Agitator
• Solids Handling: Max. solid handling 30 mm
• Liquid:  Suitable for sludge, slurry, liquids containing sandy mud and bentonite
• Electric Motor: Dry-type submersible induction motor, Insulation class B 4 poles, 1440 rpm
• DOL: Direct on line start
• Voltage: 380V – 415V, 50Hz, three phase
• P1 Power input: 7,5kW , P2 Power output: 6,0kW
• Full Load Current:  13,0 Amps
• Start current: 93,0 Amps
• Electric Cable 20 meters  H07RN-F 4Cx2,5mm2
• Motor Protection: Circle thermal protector (snap-action bi-metal device)
• Shaft Seal: Double mechanical seal in oil bath additional lubrication by oil lifting device
• Primary Seal: silicon carbide on silicon carbide
• Secondary Seal: silicon carbide on silicon carbide
• Bearings: Shielded ball bearings, maintenance-free
• Materials
• Impeller: Chromium iron casting
• Agitator: Chromium iron casting
• Casing: FC200 (EN-GJL-200)
• Suction Plate: Chromium iron casting
• Motor frame: FC150 (EN-GJL-150)
• Shaft: SUS420J2 (EN-X30Cr13)
• Discharge Connection: 100mm hose tail

Read less...

To contact Pumps and Pipes about Tsurumi Sludge & Slurry Pump | KRS2-100-53 use Get a quote.