Royal - Rough Terrain Forklift | FDT25T

Rough Terrain Forklift | FDT25T

Features of this product

• Forklifts Australia’s 2.5T and 3.5T Rough Terrain Forklifts adopt the Yanmar 4TNE98(EU III) diesel engine.
• It is world renowned for superior performance, economy and longetivity.
• Timed glow plug cold start in cold climates allows faster warm up and fuel savings.
• The Yanmar engine conforms to all world environmental EPA standards.
• The power shift transmission with torque converter features two inching pedals, brake control and full reversal allowing faster cycle times.
• The differential is specifically designed for rough terrain and features automatic differential lock providing ultimate traction during inclement weather conditions and rough operating surfaces.
• The oscillating steel axle allows either wheel to step over obstacles keeping the machine and load level.
• Floatation drive and steer tyres provide excellent traction and stability.
• The steering angle is from 54° to 78° with very small turning radius.
• Forklifts Australia’s Rough Terrain Forklift design has adopted a clear and concise appearance with a modern design.
• Forklifts Australia’s Rough Terrain Forklift adopts a floating R.O.P system.
• Engineers have adapted the latest ergonomics for operator convenience.
• A superior full floating operator cabin is installed with rubber damping instead of the traditional rigid design.
• This greatly reduces machine vibration and offers a smoother ride over rough terrain and reduces operator fatigue.
• Travel and hydraulic controls are positioned forward for the most ergonomic natural operation.
• The fully adjustable tilt steering wheel and full suspension seat with seat belt accommodate various sized operators.
• The 2.5T Rough Terrain Forklift’s mast width is 1557.5mm.
• The 3.5T Rough Terrain Forklift’s mast width is 1600.5mm.
• Maximum mast tilt angle F/R reaches to 10°/12°.
• The wide view mast provides excellent through-the-mast visibility improving the work efficiency and allowing safe operation of the forklift.
• Beam rails and heavy tie bar construction reduce twisting while handling long, lateral loads on rough surface applications.
• Sealed bearing load rollers are externally adjustable to compensate for long term wear.
• Side thrust rollers on the top and bottom of all rails and carriage side thrust rollers reduce mast roller maintenance and replacements.
• A clear view to the forks and surrounding area is optimised through the wide view mast.
• Excellent rearward visibility is enhanced with the sloping rear counterweight and fenders.
• The dash and LED monitor panel is mounted low and in the line of sight for operator’s convenience.

Specifications of this product

• Power : Diesel
• Lift Height : 3.00m
• Load Capacity : 2500kg

Read more...

To contact Access Hire Australia about Royal Rough Terrain Forklift | FDT25T use Get a quote.

Features of this product

• Forklifts Australia’s 2.5T and 3.5T Rough Terrain Forklifts adopt the Yanmar 4TNE98(EU III) diesel engine.
• It is world renowned for superior performance, economy and longetivity.
• Timed glow plug cold start in cold climates allows faster warm up and fuel savings.
• The Yanmar engine conforms to all world environmental EPA standards.
• The power shift transmission with torque converter features two inching pedals, brake control and full reversal allowing faster cycle times.
• The differential is specifically designed for rough terrain and features automatic differential lock providing ultimate traction during inclement weather conditions and rough operating surfaces.
• The oscillating steel axle allows either wheel to step over obstacles keeping the machine and load level.
• Floatation drive and steer tyres provide excellent traction and stability.
• The steering angle is from 54° to 78° with very small turning radius.
• Forklifts Australia’s Rough Terrain Forklift design has adopted a clear and concise appearance with a modern design.
• Forklifts Australia’s Rough Terrain Forklift adopts a floating R.O.P system.
• Engineers have adapted the latest ergonomics for operator convenience.
• A superior full floating operator cabin is installed with rubber damping instead of the traditional rigid design.
• This greatly reduces machine vibration and offers a smoother ride over rough terrain and reduces operator fatigue.
• Travel and hydraulic controls are positioned forward for the most ergonomic natural operation.
• The fully adjustable tilt steering wheel and full suspension seat with seat belt accommodate various sized operators.
• The 2.5T Rough Terrain Forklift’s mast width is 1557.5mm.
• The 3.5T Rough Terrain Forklift’s mast width is 1600.5mm.
• Maximum mast tilt angle F/R reaches to 10°/12°.
• The wide view mast provides excellent through-the-mast visibility improving the work efficiency and allowing safe operation of the forklift.
• Beam rails and heavy tie bar construction reduce twisting while handling long, lateral loads on rough surface applications.
• Sealed bearing load rollers are externally adjustable to compensate for long term wear.
• Side thrust rollers on the top and bottom of all rails and carriage side thrust rollers reduce mast roller maintenance and replacements.
• A clear view to the forks and surrounding area is optimised through the wide view mast.
• Excellent rearward visibility is enhanced with the sloping rear counterweight and fenders.
• The dash and LED monitor panel is mounted low and in the line of sight for operator’s convenience.

Specifications of this product

• Power : Diesel
• Lift Height : 3.00m
• Load Capacity : 2500kg

Read less...

To contact Access Hire Australia about Royal Rough Terrain Forklift | FDT25T use Get a quote.

Access Hire Australia_Rough Terrain Forklift FDT25T_Brochure(1.16MB)