Multitool - Industrial Bench Grinder | PO484-250

Industrial Bench Grinder | PO484-250

TM400-250

• Powerful 900W Induction Motor.
• 25mm width grinding wheels
• Cast iron body and base for long lasting performance.
• Vibration absorbing pads on base for smoother running.
• Capacitor Start-Run motor for maximum performance.
• Heavy Duty tool rests for maximum user control.
• Large eyes shield for increased user safety.

PO484

The Multitool is a renowned Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding grinding sharpening shaping polishing and refinishing.

• EFFICIENCY - Superior performance and a user friendly belt change of under 5 seconds.
• VERSATILITY - Grinding sanding or polishing in 4 positions on rubber contact wheel platen disc or free strapping. The unit can also be swivelled vertically or any position in between.
• ACCURATE TRACKING - The running position of the belt is simple to adjust and it stays there allowing for finishing into sharp corners.
• QUALITY CONSTRUCTION - Robust maintenance free with sealed ball bearings hardened and ground essential components and zinc plating.
• 3 YEAR WARRANTY - Against faulty materials and workmanship even when used commercially.

Specifications

• 48" x 4" wide (1220 x 100mm) belt.
• 7" (178mm) diameter disc.
• 3 1/2" (89mm) diameter rubber contact wheel.
• 5 1/2" (140mm) diameter drive wheel.

Read more...

To contact Collins Tools and Welding Supplies about Multitool Industrial Bench Grinder | PO484-250 use Get a quote.

TM400-250

• Powerful 900W Induction Motor.
• 25mm width grinding wheels
• Cast iron body and base for long lasting performance.
• Vibration absorbing pads on base for smoother running.
• Capacitor Start-Run motor for maximum performance.
• Heavy Duty tool rests for maximum user control.
• Large eyes shield for increased user safety.

PO484

The Multitool is a renowned Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding grinding sharpening shaping polishing and refinishing.

• EFFICIENCY - Superior performance and a user friendly belt change of under 5 seconds.
• VERSATILITY - Grinding sanding or polishing in 4 positions on rubber contact wheel platen disc or free strapping. The unit can also be swivelled vertically or any position in between.
• ACCURATE TRACKING - The running position of the belt is simple to adjust and it stays there allowing for finishing into sharp corners.
• QUALITY CONSTRUCTION - Robust maintenance free with sealed ball bearings hardened and ground essential components and zinc plating.
• 3 YEAR WARRANTY - Against faulty materials and workmanship even when used commercially.

Specifications

• 48" x 4" wide (1220 x 100mm) belt.
• 7" (178mm) diameter disc.
• 3 1/2" (89mm) diameter rubber contact wheel.
• 5 1/2" (140mm) diameter drive wheel.

Read less...

To contact Collins Tools and Welding Supplies about Multitool Industrial Bench Grinder | PO484-250 use Get a quote.