Koenig - CO2 Laser Marking Machine | K1309 Price Guide: $14,795 Get latest price

CO2 Laser Marking Machine | K1309

CO2 Laser Marking Machine | K1309

CO2 Laser Marking Machine | K1309

CO2 Laser Marking Machine | K1309

CO2 Laser Marking Machine | K1309

CO2 Laser Marking Machine | K1309

In Stock

Koenig CO2 Laser Marking Machine | K1309

• 1300x900mm bed size
• 100W or 150W power

 

Highlights

• Fully enclosed machine
• 4-way feed through – feed through though any side
• In-line beam combiner for easy mirror alignment and set-up
• Origin rulers for aligning your workpiece
• Automatic height adjust as standard
• Works with PC or Mac, RDworks or Lightburn Software
• 200mm Up-down table
• Conical table for better extraction and clean up drawer
• LED internal lighting
• Water chiller, compressor, extraction fan included

 

Features

• Fully enclosed machine for additional safety and protection. Our clear access lid gives you a view of your work in action while protecting your eyes for the CO2 laser beam. The interlocking sensor in the laser lid will stop themachine from running if the lid is opened during use. All other doors have key locks. If you are looking for an Education machine, ask us today about our EDUCATION model upgrade and interlocking sensors in all machine doors.
• 4-way feed through allows you to feed material through the machine front-to-back and left-to-right, increasing the capacity of your machine while keeping a small footprint and full enclosure. Feed through a full 1220x2440 sheet!
• The In-line beam combiner provides a red LED light travelling at the same trajectory as the invisible CO2 laser beam. This allows for easy mirror alignment during set-up and general maintenance, making your user experience practically trouble free!
• Our Origin rulers provide you with a quick and easy way to align your workpiece to the origin of the bed when cutting and manually measure points of reference. You can also move the laser head to a position on the bed and create a starting point from here, so cutting from offcuts and scrap pieces is made easy. You will have more productivity, less wastage and complete control over your cutting process.
• Our Automatic height adjust head is now standard on all machines, allowing you to quickly and safely set the focal height of the machine in reference to the material placed on the bed. With a click of a button you are ready to start cutting.
• We now provide both RDworksand Lightburn Software with your machine. RDworks is compatible with PC and Lightburn is compatible with both PC and MAC OS computers allowing you to have a streamline design process. We love the Lightburn software package with its easy, intuitive functionality and we know you will too.  
• Our K1309 machine has been designed with a solid welded chasis frame. Please review dimensions of the machine as it will not fit through a standard door frame. For internal machine set ups please ask us about our air filter options.
• The Z (up-down) travel of the machine is 200mm, allowing the machine to be used with either a wheel or chuck type rotary device and allowing for cutting and engraving onto large objects.
• There is a Conical table with under table extraction connection, for better quality extraction. The conical shape also helps to capture and parts or offcuts and channel them into the clean-up drawer
• LED internal lighting allows you to easily view your workpiece cutting through the tinter protective lid.
• Our S&A CW5200 Water chiller is included with both the 100W and 150W power options. Our standard compressor and extraction fan are included. Ask us about our Software integrated High-powered compressor option for optimal quality clean cutting, and our air filtration units for filtering all particles and fumes from the air (recommended for office and at-home machine set-up)
• Dedicated Australian technical support. Local on-site technician for set-up or when required.
• FREE Lifetime Technical Support For the lifetime of the machine over the phone, email or remote computer access (on-site service available)
• 1 year Warranty covering all machine parts + 9 month laser tube warranty.

 

Technical Parameters	Specification
Laser Power	150W (100W available)
Cutting area	1300 x 900mm
Z axis	200mm travel - motorised up-down table
Laser Type	RECI CO2 Glass Tube 10.6μm – up to 10,000 hour life
Machine footprint (total size)	1868 x 1468 x 1090(H)mm
Machine weight	470kg
Table type	Knife bed table included (optional honeycomb table available)
Motor Type	Nema Stepper Motor
Rail type	Haiwin Taiwanese Rails
Ventilation	Fan and extraction hosing provided (4 stage air filters optional)
Cooling Type	S&A CW5200 enclosed water chilling unit included
Engraving Speed	Up to 600mm/s
Cutting Speed	Up to 300mm/s
Min. Engraving Size	1.0mm*1.0mm
Locating Accuracy	≤+0.05mm
Controlling Software	DSP Control System
Software	RDworks and Lightburn
Computer compatibility	Windows, Mac OS, or Linux (32 or 64-bit)
Graphic Format Supported	DXF DWG AI PDF DST PLT BMP JPG PNG etc
Machine file memory	128MB internal memory (up to 100 files)
Power Supply	230V 50Hz 10amp– Standard single phase

 

Read more...

To contact Koenig Machinery about Koenig CO2 Laser Marking Machine | K1309 use Get a quote.

Koenig CO2 Laser Marking Machine | K1309

• 1300x900mm bed size
• 100W or 150W power

 

Highlights

• Fully enclosed machine
• 4-way feed through – feed through though any side
• In-line beam combiner for easy mirror alignment and set-up
• Origin rulers for aligning your workpiece
• Automatic height adjust as standard
• Works with PC or Mac, RDworks or Lightburn Software
• 200mm Up-down table
• Conical table for better extraction and clean up drawer
• LED internal lighting
• Water chiller, compressor, extraction fan included

 

Features

• Fully enclosed machine for additional safety and protection. Our clear access lid gives you a view of your work in action while protecting your eyes for the CO2 laser beam. The interlocking sensor in the laser lid will stop themachine from running if the lid is opened during use. All other doors have key locks. If you are looking for an Education machine, ask us today about our EDUCATION model upgrade and interlocking sensors in all machine doors.
• 4-way feed through allows you to feed material through the machine front-to-back and left-to-right, increasing the capacity of your machine while keeping a small footprint and full enclosure. Feed through a full 1220x2440 sheet!
• The In-line beam combiner provides a red LED light travelling at the same trajectory as the invisible CO2 laser beam. This allows for easy mirror alignment during set-up and general maintenance, making your user experience practically trouble free!
• Our Origin rulers provide you with a quick and easy way to align your workpiece to the origin of the bed when cutting and manually measure points of reference. You can also move the laser head to a position on the bed and create a starting point from here, so cutting from offcuts and scrap pieces is made easy. You will have more productivity, less wastage and complete control over your cutting process.
• Our Automatic height adjust head is now standard on all machines, allowing you to quickly and safely set the focal height of the machine in reference to the material placed on the bed. With a click of a button you are ready to start cutting.
• We now provide both RDworksand Lightburn Software with your machine. RDworks is compatible with PC and Lightburn is compatible with both PC and MAC OS computers allowing you to have a streamline design process. We love the Lightburn software package with its easy, intuitive functionality and we know you will too.  
• Our K1309 machine has been designed with a solid welded chasis frame. Please review dimensions of the machine as it will not fit through a standard door frame. For internal machine set ups please ask us about our air filter options.
• The Z (up-down) travel of the machine is 200mm, allowing the machine to be used with either a wheel or chuck type rotary device and allowing for cutting and engraving onto large objects.
• There is a Conical table with under table extraction connection, for better quality extraction. The conical shape also helps to capture and parts or offcuts and channel them into the clean-up drawer
• LED internal lighting allows you to easily view your workpiece cutting through the tinter protective lid.
• Our S&A CW5200 Water chiller is included with both the 100W and 150W power options. Our standard compressor and extraction fan are included. Ask us about our Software integrated High-powered compressor option for optimal quality clean cutting, and our air filtration units for filtering all particles and fumes from the air (recommended for office and at-home machine set-up)
• Dedicated Australian technical support. Local on-site technician for set-up or when required.
• FREE Lifetime Technical Support For the lifetime of the machine over the phone, email or remote computer access (on-site service available)
• 1 year Warranty covering all machine parts + 9 month laser tube warranty.

 

Technical Parameters	Specification
Laser Power	150W (100W available)
Cutting area	1300 x 900mm
Z axis	200mm travel - motorised up-down table
Laser Type	RECI CO2 Glass Tube 10.6μm – up to 10,000 hour life
Machine footprint (total size)	1868 x 1468 x 1090(H)mm
Machine weight	470kg
Table type	Knife bed table included (optional honeycomb table available)
Motor Type	Nema Stepper Motor
Rail type	Haiwin Taiwanese Rails
Ventilation	Fan and extraction hosing provided (4 stage air filters optional)
Cooling Type	S&A CW5200 enclosed water chilling unit included
Engraving Speed	Up to 600mm/s
Cutting Speed	Up to 300mm/s
Min. Engraving Size	1.0mm*1.0mm
Locating Accuracy	≤+0.05mm
Controlling Software	DSP Control System
Software	RDworks and Lightburn
Computer compatibility	Windows, Mac OS, or Linux (32 or 64-bit)
Graphic Format Supported	DXF DWG AI PDF DST PLT BMP JPG PNG etc
Machine file memory	128MB internal memory (up to 100 files)
Power Supply	230V 50Hz 10amp– Standard single phase

 

Read less...

To contact Koenig Machinery about Koenig CO2 Laser Marking Machine | K1309 use Get a quote.