BIOGAS 3000 Online Gas Analyser
Sampling Points | 1–4 |
|---|---|
Gases Monitored | Standard: CH4, CO2, O2 • Optional: H2S, H2, CO (5 total max) |
Measurement Intervals | User definable; continuous option available |
Operating Temperature | 0°C to +50°C (standard); -20°C with heater option |
Mains Supply | 110–230 VAC, 50/60Hz |
Max Power Consumption | 155W |
Gas Measuring Principle | Dual wavelength IR (CH4, CO2), Electrochemical (O2, H2S, H2, CO) |
Ranges | CH4: 0–100% (±0.5% =70%) CO2: 0–100% (±0.5% =60%) O2: 0–25% (±1.0%) H2S (various): 0–10,000 ppm (±1.5–5% FS) CO/H2: 0–1,000 ppm (±2–3% FS) |
Response Time | CH4: =10 s, CO2: =10 s, O2: =20 s H2S: =30-40 s CO: =30 s, H2: <90 s |
Cell Lifetime | O2: 3 years, others: 2 years (in air) |
Pump Flow | Typical 300ml/min, flow-fail below 75ml/min |
Communications | 6 x 4-20mA outputs, Modbus RTU, optional Profibus/Profinet |
Alarm Outputs | 1 x fault relay, 7 x configurable alarm relays |
IP Rating | IP65 |
Operating Pressure | -350 mbar to +350 mbar |
Humidity | 0–95% non-condensing |
Dimensions | 650mm x 600mm x 210mm (stainless steel wall-mount enclosure) |
Weight | 36.5 kg |
Display | 4.3” full colour TFT, alpha-numeric tactile keypad |
Moisture Removal | User replaceable microfibre filter, 2.0µm PTFE water traps, optional auto moisture drain |
Certifications | ISO17025, ATEX / IECEx zone 2, BS EN standards |
To contact Thermo Fisher Scientific Australia Pty Ltd about BIOGAS 3000 Online Gas Analyser use Get a quote.
Sampling Points | 1–4 |
|---|---|
Gases Monitored | Standard: CH4, CO2, O2 • Optional: H2S, H2, CO (5 total max) |
Measurement Intervals | User definable; continuous option available |
Operating Temperature | 0°C to +50°C (standard); -20°C with heater option |
Mains Supply | 110–230 VAC, 50/60Hz |
Max Power Consumption | 155W |
Gas Measuring Principle | Dual wavelength IR (CH4, CO2), Electrochemical (O2, H2S, H2, CO) |
Ranges | CH4: 0–100% (±0.5% =70%) CO2: 0–100% (±0.5% =60%) O2: 0–25% (±1.0%) H2S (various): 0–10,000 ppm (±1.5–5% FS) CO/H2: 0–1,000 ppm (±2–3% FS) |
Response Time | CH4: =10 s, CO2: =10 s, O2: =20 s H2S: =30-40 s CO: =30 s, H2: <90 s |
Cell Lifetime | O2: 3 years, others: 2 years (in air) |
Pump Flow | Typical 300ml/min, flow-fail below 75ml/min |
Communications | 6 x 4-20mA outputs, Modbus RTU, optional Profibus/Profinet |
Alarm Outputs | 1 x fault relay, 7 x configurable alarm relays |
IP Rating | IP65 |
Operating Pressure | -350 mbar to +350 mbar |
Humidity | 0–95% non-condensing |
Dimensions | 650mm x 600mm x 210mm (stainless steel wall-mount enclosure) |
Weight | 36.5 kg |
Display | 4.3” full colour TFT, alpha-numeric tactile keypad |
Moisture Removal | User replaceable microfibre filter, 2.0µm PTFE water traps, optional auto moisture drain |
Certifications | ISO17025, ATEX / IECEx zone 2, BS EN standards |
To contact Thermo Fisher Scientific Australia Pty Ltd about BIOGAS 3000 Online Gas Analyser use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product