Telestack - Tracked Conveyors | TC 424X

Tracked Conveyors | TC 424X

Tracked Conveyors | TC 424X

Tracked Conveyors | TC 424X

As mobile crushers and screens constantly get larger with increased throughputs, transport restrictions have not allowed for their on board conveyors to increase in size and length to cope with higher tonnages. Track conveyors fulfill this need by providing much larger stockpile capacity and at the same time improve plant mobility by removing material from the processing equipment.

TC 424X Key Features

• High throughput of up to 400 tph (440 Ton / hr) 
• Maximum distance between tracks and head drum, for optimum stockpiling capacity 
• Maximum lump feed size of up to 100mm (4") 
• Front and rear adjustable telescopic to obtain desired discharge or feed in height 
• Engine protection shutdown system 
• Counter weight built into feed boot area to give integral strength and stability in working position.
• Folding head and tail section for ease of transport 
• Paint specification, Cream: RAL 7032, Red: RAL 3001 
• Options available 

Applications

• Stockpiling from secondary crushers and screens.
• Stockpiling crushed stone, sand and gravel, mineral ores.
• Stockpiling construction and demolition waste, top soil, coal, grain etc. 
• Receiving crushed material and stockpiling safely over a quarry face/bench. 
• Working as part of a mobile system on short to medium term projects. 
• Ship and truck loading.

Key Benefits

• Removes the need for a dedicated wheel loader to constantly remove material from the crusher, screen or shredder. 
• Reduces fuel cost by up to 75% 
• Reduces operating cost by up to 70% 
• Removing / reducing loading shovel movements reducing operating cost. 
• Reduces screener idle time increasing production. 
• Reduces face excavator idle time increasing production. 
• Production rates of up to 400tph. 
• Hydraulic folding head section allowing for compact road transportation. 
• Typical set up time of under 10minutes. 
• Hydraulic tail section height adjustment whilst at the same time maintaining head drum height ensuring maximum stockpile capacity. 
• High specification machine designed for ease of maintenance commanding an excellent resale value at project conclusion.

View  our various range of Tracked Conveyors

Telestack TC 421 Tracked Conveyor

Telestack TC 420X Tracked Conveyor

Telestack TC 621R Tracked Conveyor

Telestack 42m Tracked Telescopic Conveyor

Please note:

1) Tonnages quoted are based on free flowing material with a density of 1.6 Tonne /m3 (100 lb/ft3 ). If a specific tonnage is required this should be discussed with the factory.

2) Ideal working angle for conveyor is 16º - 23º

3) All possible steps have been taken to ensure the accuracy of this publication, however due to continual product development we reserve the right to change specifications without notice

 

Read more...

To contact Tricon Mining Equipment about Telestack Tracked Conveyors | TC 424X use Get a quote.

As mobile crushers and screens constantly get larger with increased throughputs, transport restrictions have not allowed for their on board conveyors to increase in size and length to cope with higher tonnages. Track conveyors fulfill this need by providing much larger stockpile capacity and at the same time improve plant mobility by removing material from the processing equipment.

TC 424X Key Features

• High throughput of up to 400 tph (440 Ton / hr) 
• Maximum distance between tracks and head drum, for optimum stockpiling capacity 
• Maximum lump feed size of up to 100mm (4") 
• Front and rear adjustable telescopic to obtain desired discharge or feed in height 
• Engine protection shutdown system 
• Counter weight built into feed boot area to give integral strength and stability in working position.
• Folding head and tail section for ease of transport 
• Paint specification, Cream: RAL 7032, Red: RAL 3001 
• Options available 

Applications

• Stockpiling from secondary crushers and screens.
• Stockpiling crushed stone, sand and gravel, mineral ores.
• Stockpiling construction and demolition waste, top soil, coal, grain etc. 
• Receiving crushed material and stockpiling safely over a quarry face/bench. 
• Working as part of a mobile system on short to medium term projects. 
• Ship and truck loading.

Key Benefits

• Removes the need for a dedicated wheel loader to constantly remove material from the crusher, screen or shredder. 
• Reduces fuel cost by up to 75% 
• Reduces operating cost by up to 70% 
• Removing / reducing loading shovel movements reducing operating cost. 
• Reduces screener idle time increasing production. 
• Reduces face excavator idle time increasing production. 
• Production rates of up to 400tph. 
• Hydraulic folding head section allowing for compact road transportation. 
• Typical set up time of under 10minutes. 
• Hydraulic tail section height adjustment whilst at the same time maintaining head drum height ensuring maximum stockpile capacity. 
• High specification machine designed for ease of maintenance commanding an excellent resale value at project conclusion.

View  our various range of Tracked Conveyors

Telestack TC 421 Tracked Conveyor

Telestack TC 420X Tracked Conveyor

Telestack TC 621R Tracked Conveyor

Telestack 42m Tracked Telescopic Conveyor

Please note:

1) Tonnages quoted are based on free flowing material with a density of 1.6 Tonne /m3 (100 lb/ft3 ). If a specific tonnage is required this should be discussed with the factory.

2) Ideal working angle for conveyor is 16º - 23º

3) All possible steps have been taken to ensure the accuracy of this publication, however due to continual product development we reserve the right to change specifications without notice

 

Read less...

To contact Tricon Mining Equipment about Telestack Tracked Conveyors | TC 424X use Get a quote.