Telestack - Radial Telescopic Conveyors | RSL30

Radial Telescopic Conveyors | RSL30

Radial Telescopic Conveyors | RSL30

Radial Telescopic Conveyors | RSL30

The Telestack range of Tracked Radial Stockpiling Conveyors is the ideal solution for stockpiling after mobile crushing and screening plants. The mobility and flexibility of the Radial Stockpiling Conveyors reduce and eliminates the use of a wheel loader on site. The range of stackers ensures all applications are catered for from heavy duty primary jaw crushing applications to light duty screening applications. With over 1000 of these units in operation globally, Telestack is the market leader in these range of units.  

The innovative design allows for up to +30% larger stockpile to be achieved of “in-spec” material on the same footprint when compared to a standard conveyor design of the same length. The conveyor moves from left to right in a radial arc motion starting at a low luffing angle with the inner conveyor retracted. When the unit completes a full pass over the stockpile, the inner conveyor extends and continuous to radial over the stockpile. The luffing angle automatically increases as the stockpile height increases.

Radial Telescopic Conveyors - RSL30 Benefits

• 30% Larger  stockpile capacity
• Stockpiling rates from 100TPH - 3000TPH* 
• Lengths from 25 metres (82ft) to 58 metres (190ft) 
• Stockpiling capacities from 1,200 tonnes to 200,000 tonnes at 270 degrees 
• Stockpiling ‘In specification material’ reduces re-blending/ remixes process 
• Telescopic stockpile approximately 30% increased capacity when comparing typical conical stockpile*
• Stockpile heights up to 20 metres (65ft)
• Stockpiling 0 - 300mm (12 inch down) material
• Easily packed into containers for shipment throughout the world 
• Assembly on site 1 week, limited civils required - no welding, electrics, hydraulics               *Based on 1.6 t/m³ density

The Telestack PLC technology is key to their products delivering a high-quality product efficiently. The technology prevents material segregation and degradation by stockpiling windrows of material in incremental lifts using a user friendly fully programmable PLC controller with numerous different programs available to the operator.

Read more...

To contact Tricon Mining Equipment about Telestack Radial Telescopic Conveyors | RSL30 use Get a quote.

The Telestack range of Tracked Radial Stockpiling Conveyors is the ideal solution for stockpiling after mobile crushing and screening plants. The mobility and flexibility of the Radial Stockpiling Conveyors reduce and eliminates the use of a wheel loader on site. The range of stackers ensures all applications are catered for from heavy duty primary jaw crushing applications to light duty screening applications. With over 1000 of these units in operation globally, Telestack is the market leader in these range of units.  

The innovative design allows for up to +30% larger stockpile to be achieved of “in-spec” material on the same footprint when compared to a standard conveyor design of the same length. The conveyor moves from left to right in a radial arc motion starting at a low luffing angle with the inner conveyor retracted. When the unit completes a full pass over the stockpile, the inner conveyor extends and continuous to radial over the stockpile. The luffing angle automatically increases as the stockpile height increases.

Radial Telescopic Conveyors - RSL30 Benefits

• 30% Larger  stockpile capacity
• Stockpiling rates from 100TPH - 3000TPH* 
• Lengths from 25 metres (82ft) to 58 metres (190ft) 
• Stockpiling capacities from 1,200 tonnes to 200,000 tonnes at 270 degrees 
• Stockpiling ‘In specification material’ reduces re-blending/ remixes process 
• Telescopic stockpile approximately 30% increased capacity when comparing typical conical stockpile*
• Stockpile heights up to 20 metres (65ft)
• Stockpiling 0 - 300mm (12 inch down) material
• Easily packed into containers for shipment throughout the world 
• Assembly on site 1 week, limited civils required - no welding, electrics, hydraulics               *Based on 1.6 t/m³ density

The Telestack PLC technology is key to their products delivering a high-quality product efficiently. The technology prevents material segregation and degradation by stockpiling windrows of material in incremental lifts using a user friendly fully programmable PLC controller with numerous different programs available to the operator.

Read less...

To contact Tricon Mining Equipment about Telestack Radial Telescopic Conveyors | RSL30 use Get a quote.