Stoney CNC CNC Milling Machine | ...

Stoney CNC - CNC Milling Machine | SYMBIOSIS-Router-Mill-Hybrid

Supplier: BG Precision

CNC Milling Machine | SYMBIOSIS-Router-Mill-Hybrid

The Symbiosis can be configured in many different ways to meet your machining needs. SYMBIOSIS : Bridging the gap between router and milling machine

In Stock

Often router users like to use their machines to cut aluminium. Largely built out of aluminium frames, a CNC router has limited capacity to product a quality finish on Aluminium.

The CNC routers enemy when cutting aluminium is the main carcass stiffness. The SYMBIOSIS machine is an affordable Hybrid machine that can produce milling and routing performance in one package.

SYMBIOSIS can carry out all the typical routing operations. However under the bonnet SYMBIOSIS is very different. The heavy duty steel frame, 20mm HIWIN rails, 16mm ballscrews and fixed bridge design means the machine produces milling machine stiffness when milling aluminium.

Product Features:

The machine weighs almost 200kgs. The steel used is thick walled box iron and laser cut plate. You will not find a stiffer small format CNC platform

250 Kg / 550 Pound steel frame
5mm steel box section wall elements
Fixed bridge moving gantry router mill hybrid design
Full ballscrew drive system on all axes
High load thrust bearings on all axes
600 x 400mm travel in XY
150mm of Z throat access | 120mm of travel
20mm Heavy duty HIWIN profile linear rails on all axes

Product Advantages:

FULL BALLSCREW DRIVE SYSTEM: Superior Accuracy, Efficiency, Speed and No Backlash.
HEAVY DUTY HIWAN LINEAR RAILS: The Symbiosis machine is built on heavy duty HIWIN profiled linear rails. The profiled linear rails are one of the best linear motion system for machine stiffness.
THE SYMBIOSIS SPINDLE SYSTEM: As standard the Symbiosis comes with a High Quality ER25 2.2kw Italian Spindle with Ceramic bearings
THE SYMBIOSIS BED SYSTEM: As standard the Symbiosis comes with an Aluminium T-slot table
THE SYMBIOSIS DRIVE TRAIN
- NEMA 23 2.5NM 4A stepper motors as standard
- The motors are IP54 rated with fitted cable-glands
- All cables EMC shielded
- Significantly improved cable management and motor protection
- 75V DC High voltage high torque stepper amplifier system
- Fully digital motor amplifiers
- Up to 10,000mm/min rapids
THE SYMBIOSIS CONTROL PLATFORM AND INTERFACE: Machine comes as standard with full UCCNC PC based control system with integrated 3 Axis and spindle control. This PC based control allows for real time feedback of machine position to minimise mistakes.

To contact BG Precision about Stoney CNC CNC Milling Machine | SYMBIOSIS-Router-Mill-Hybrid use Get a quote.

Often router users like to use their machines to cut aluminium. Largely built out of aluminium frames, a CNC router has limited capacity to product a quality finish on Aluminium.

The CNC routers enemy when cutting aluminium is the main carcass stiffness. The SYMBIOSIS machine is an affordable Hybrid machine that can produce milling and routing performance in one package.

Product Features:

The machine weighs almost 200kgs. The steel used is thick walled box iron and laser cut plate. You will not find a stiffer small format CNC platform

250 Kg / 550 Pound steel frame
5mm steel box section wall elements
Fixed bridge moving gantry router mill hybrid design
Full ballscrew drive system on all axes
High load thrust bearings on all axes
600 x 400mm travel in XY
150mm of Z throat access | 120mm of travel
20mm Heavy duty HIWIN profile linear rails on all axes

Product Advantages:

FULL BALLSCREW DRIVE SYSTEM: Superior Accuracy, Efficiency, Speed and No Backlash.
HEAVY DUTY HIWAN LINEAR RAILS: The Symbiosis machine is built on heavy duty HIWIN profiled linear rails. The profiled linear rails are one of the best linear motion system for machine stiffness.
THE SYMBIOSIS SPINDLE SYSTEM: As standard the Symbiosis comes with a High Quality ER25 2.2kw Italian Spindle with Ceramic bearings
THE SYMBIOSIS BED SYSTEM: As standard the Symbiosis comes with an Aluminium T-slot table
THE SYMBIOSIS DRIVE TRAIN
- NEMA 23 2.5NM 4A stepper motors as standard
- The motors are IP54 rated with fitted cable-glands
- All cables EMC shielded
- Significantly improved cable management and motor protection
- 75V DC High voltage high torque stepper amplifier system
- Fully digital motor amplifiers
- Up to 10,000mm/min rapids
THE SYMBIOSIS CONTROL PLATFORM AND INTERFACE: Machine comes as standard with full UCCNC PC based control system with integrated 3 Axis and spindle control. This PC based control allows for real time feedback of machine position to minimise mistakes.