Pinnacle - Horizontal CNC Machining Centre | LH500A

Horizontal CNC Machining Centre | LH500A

Features:

• 500 x 500 Table
• 650 x 560 x 560 mm Travel
• Index Table 1° ( 0.001°)
• 11/15 KW Spindle Motor
• Chain Type 40-Tool ATC
• ISO40 Spindle Taper
• X, Y,Z axis Rapid Feed
• 30/24 /30 M/min.

OPTIMAL STRUCTURE DESIGN

EQUIPPED WITH ROTARY TABLE.

• The major structural parts are manufactured form Meehanite cast iron, hardened to hardness over HB190
• The structural parts are tempered for stress relief that ensures deformation-free performance year after year.
• X, Y, Z axis are mounted with roller type linear ways, exhibiting extra high rigidity and loading capacity.
• Oversized column structure dramatically increases machining stability.
• Fixed column construction.

ROTARY TABLE

• HIGH ACCURACY The rotary table employs three-piece teeth plate for high accuracy indexing.HEAVY-CUTTING RESISTANCE The three-piece teeth plate combined with hydraulic locking mechanism allows full teeth engagement. This results in higher rigidity and increased heavy cutting capacity.

GEAR BOX (OPTION)

• This spindle running is transmitted through a gear box, making the machine excellent for heavy cutting applications.
• With the gear box, the spindle provides two speed changes. The low speed range is 40~1750rpm, and high speed range is 1751~8000 rpm. The wide speed range permits the machine to perform heavy cutting and fine fine finishing.
• All gears and bearings in the gear box are oil-bath lubricated.

COOLING THROUGH SPINDLE (OPTIONAL)

Coolant circulates through spindle offer a direct cooling effect on tools, removing heat that occurs during machining. Combines with filter tank system (optional).

TWO SCREW TYPE CHIP CONVEYORS ON BASE

There are two screw type chip conveyors provided at right and left side of the base. During cutting, the chips are delivered through these chip conveyors for exhausting chips outside of the machine.

CHAIN TYPE CONVEYOR (OPTIONAL)

The chip conveyor is available to be mounted at the backside of the machine. It removes chips efficiently.

40 TOOLS CHAIN TYPE MAGAZINE (STANDARD)

• The magazine is driven by a precision cam, featuring fast and accurate tool positioning.
• Tool selection is bi-directional and random for fast tool change.
• The magazine accepts ISO40 tool shank.
• The magazine is separately mounted from the cutting area combined with a protection door to protect tools from contamination from chips or coolant.

HYDRAULIC BALANCE SYSTEM

The Y-axis movement is counter-balanced through a hydraulic cylinder. An accumulator is equipped in the hydraulic circuit. This counter-balance system will reduce spindle head vibration to a minimum, while significantly improving machining accuracy.

DUAL PITCH WORM / WORM GEAR SET

The transmission mechanism employs high efficiency " Dual Pitch Worm / Worm Gear Set " for increasing teeth engagement percentage. This outstanding feature offers increased efficiency and wear-resistant capability.

HOLLOW BALL SCREW WITH COOLING SYSTEM

• Three axes are transmitted through class C3 high precision high speed, no-noise ball screws.
• Ø36mm, ball screws are pretensioned and preloaded to minimize deformation.
• A laser unit is applied to calibrate the machine accuracy to ensure machining accuracy.
• Coolant through ball screws on X, Y, Z axis minimizes thermal deformation and backlash, while ensuring smooth motion during rapid traverse.

Accessories:

• Air blast through spindle
• Air blast for workpiece (nose)
• Coolant flushing system
• 3 axes telescopic covers
• Full splash guard
• Automatic lubrication system
• Working lamp
• Operation status light
• Screw type chip conveyors (rear)
• Rotary table index 1°
• Chain type 40-tool ATC
• Cooling System
• Air gun / water gun
• MPG handwheel
• Heat exchanger
• Rs-232 Interface
• Rigid tapping
• Spindle oil cooler
• Z axis hydraulic balance system
• Adjusting Tools and box
• Leveling bolts and pads
• Operation and programming manual
• Hollow ball screws with cooling system

Options:

• Chain type chip conveyor
• Coolant through Spindle

 

Read more...

To contact BDMS about Pinnacle Horizontal CNC Machining Centre | LH500A use Get a quote.

Features:

• 500 x 500 Table
• 650 x 560 x 560 mm Travel
• Index Table 1° ( 0.001°)
• 11/15 KW Spindle Motor
• Chain Type 40-Tool ATC
• ISO40 Spindle Taper
• X, Y,Z axis Rapid Feed
• 30/24 /30 M/min.

OPTIMAL STRUCTURE DESIGN

EQUIPPED WITH ROTARY TABLE.

• The major structural parts are manufactured form Meehanite cast iron, hardened to hardness over HB190
• The structural parts are tempered for stress relief that ensures deformation-free performance year after year.
• X, Y, Z axis are mounted with roller type linear ways, exhibiting extra high rigidity and loading capacity.
• Oversized column structure dramatically increases machining stability.
• Fixed column construction.

ROTARY TABLE

• HIGH ACCURACY The rotary table employs three-piece teeth plate for high accuracy indexing.HEAVY-CUTTING RESISTANCE The three-piece teeth plate combined with hydraulic locking mechanism allows full teeth engagement. This results in higher rigidity and increased heavy cutting capacity.

GEAR BOX (OPTION)

• This spindle running is transmitted through a gear box, making the machine excellent for heavy cutting applications.
• With the gear box, the spindle provides two speed changes. The low speed range is 40~1750rpm, and high speed range is 1751~8000 rpm. The wide speed range permits the machine to perform heavy cutting and fine fine finishing.
• All gears and bearings in the gear box are oil-bath lubricated.

COOLING THROUGH SPINDLE (OPTIONAL)

Coolant circulates through spindle offer a direct cooling effect on tools, removing heat that occurs during machining. Combines with filter tank system (optional).

TWO SCREW TYPE CHIP CONVEYORS ON BASE

There are two screw type chip conveyors provided at right and left side of the base. During cutting, the chips are delivered through these chip conveyors for exhausting chips outside of the machine.

CHAIN TYPE CONVEYOR (OPTIONAL)

The chip conveyor is available to be mounted at the backside of the machine. It removes chips efficiently.

40 TOOLS CHAIN TYPE MAGAZINE (STANDARD)

• The magazine is driven by a precision cam, featuring fast and accurate tool positioning.
• Tool selection is bi-directional and random for fast tool change.
• The magazine accepts ISO40 tool shank.
• The magazine is separately mounted from the cutting area combined with a protection door to protect tools from contamination from chips or coolant.

HYDRAULIC BALANCE SYSTEM

The Y-axis movement is counter-balanced through a hydraulic cylinder. An accumulator is equipped in the hydraulic circuit. This counter-balance system will reduce spindle head vibration to a minimum, while significantly improving machining accuracy.

DUAL PITCH WORM / WORM GEAR SET

The transmission mechanism employs high efficiency " Dual Pitch Worm / Worm Gear Set " for increasing teeth engagement percentage. This outstanding feature offers increased efficiency and wear-resistant capability.

HOLLOW BALL SCREW WITH COOLING SYSTEM

• Three axes are transmitted through class C3 high precision high speed, no-noise ball screws.
• Ø36mm, ball screws are pretensioned and preloaded to minimize deformation.
• A laser unit is applied to calibrate the machine accuracy to ensure machining accuracy.
• Coolant through ball screws on X, Y, Z axis minimizes thermal deformation and backlash, while ensuring smooth motion during rapid traverse.

Accessories:

• Air blast through spindle
• Air blast for workpiece (nose)
• Coolant flushing system
• 3 axes telescopic covers
• Full splash guard
• Automatic lubrication system
• Working lamp
• Operation status light
• Screw type chip conveyors (rear)
• Rotary table index 1°
• Chain type 40-tool ATC
• Cooling System
• Air gun / water gun
• MPG handwheel
• Heat exchanger
• Rs-232 Interface
• Rigid tapping
• Spindle oil cooler
• Z axis hydraulic balance system
• Adjusting Tools and box
• Leveling bolts and pads
• Operation and programming manual
• Hollow ball screws with cooling system

Options:

• Chain type chip conveyor
• Coolant through Spindle

 

Read less...

To contact BDMS about Pinnacle Horizontal CNC Machining Centre | LH500A use Get a quote.