IFM Efector Radar Level Sensor | LW2720

All Products > Automation & Control > Radar Level Sensor

IFM Efector - Radar Level Sensor | LW2720 Price Guide: $2,879

Supplier: ifm efector
IFM Efector - Radar Level Sensor | LW2720
Radar Level Sensor | LW2720
IFM Efector - Radar Level Sensor | LW2720
Radar Level Sensor | LW2720
IFM Efector - Radar Level Sensor | LW2720
Radar Level Sensor | LW2720
IFM Efector - Radar Level Sensor | LW2720

Certified for use in hygienic areas, Simple installation and maintenance-free operation

Description
Documents
In Stock

Features: 

  • 80 GHz frequency enables level measurement with millimetre precision of up to 10 metres
  • Non-contact measuring principle: no malfunctions due to deposits or wear
  • Certified for use in hygienic areas
  • Simple installation and maintenance-free operation
  • Remote sensor parameter setting and level monitoring via connection to the IT system  (NOTE: An IO-Link master and a parameter setting software (e.g. moneo or LR DEVICE) are required for initial set-up)

 

Product characteristics
Number of inputs and outputs Number of digital outputs: 1; Number of analogue outputs: 1
Process connection G 1 Aseptoflex Vario
 
Application
Special feature Gold-plated contacts
Dielectric constant of the medium ≥ 2
Recommended media water; hydrous media
Medium temperature [°C] -40...150; (see diagram:)
Maximum speed of the change of level [mm/s] 200
Pressure rating [bar] 8
Note on pressure rating
0 bar at medium temperature < - 20 C
Vacuum resistance [mbar] -1000
MAWP (for applications according to CRN) [bar] 8
Radio approval for Australia; USA; Canada; EU/RED; New Zealand
Note on radio approval
The list of countries applying the European Radio Equipment Directive 2014/53/EU (RED) can be found under “Downloads”.    
 
Electrical data
Operating voltage [V] 18...30 DC
Current consumption [mA] < 80
Protection class III
Reverse polarity protection yes
Power-on delay time [s] < 15
Measuring principle FMCW (80 GHz technology); frequency range 77 - 81 Hz
 
Inputs / outputs
Number of inputs and outputs Number of digital outputs: 1; Number of analogue outputs: 1
 
Outputs
Total number of outputs 2
Output signal switching signal; analogue signal; IO-Link
Electrical design PNP/NPN
Number of digital outputs 1; (2 parameterisable)
Output function normally open / normally closed; (parameterisable)
Max. voltage drop switching output DC [V] 2.5
Permanent current rating of switching output DC [mA] 50
Number of analogue outputs 1
Analogue current output [mA] 4...20, invertible; (scalable)
Max. load [Ω] 43,5 * (Ub – 18) – 600 Ω
Short-circuit protection yes
Type of short-circuit protection pulsed
Overload protection yes
 
Measuring/setting range
Measuring range [m] 0.01...10
Sampling rate [Hz] > 3
 
Accuracy / deviations
Accuracy
± 2 mm
Resolution [mm] 1
Zero signal (current) [mA] 3.8
Full signal (current) [mA] 20.5
Temperature drift per 10 K ± 1 mm
 
Response times
Response time [ms] 330
 
Interfaces
Communication interface IO-Link
Transmission type COM2 (38,4 kBaud)
IO-Link revision 1.1
SDCI standard IEC 61131-9
Profiles Smart Sensor ED2: SSCs (0x8001), Measuring Sensor (0x000A)
SIO mode yes
Required master port type A
Process data analogue 1
Process data binary 2
Min. process cycle time [ms] 6
Supported DeviceIDs
Type of operation DeviceID
Default 0x00052C
 
Operating conditions
Ambient temperature [°C] -40...80
Note on ambient temperature
see diagram:
Storage temperature [°C] -40...90
Protection IP 68; IP 69K
 
Tests / approvals
EMC
DIN EN 61326-1 group 1: Class A (IO-Link active); B (IO-Link not active, with analogue and switching outputs)
Shock resistance
DIN EN 60068-2-27 50 g (11 ms) / 20 g (6 ms)
Vibration resistance
IEC 61298-3 2 g (10...1000 Hz)
 
Mechanical data
Weight [g] 627
Materials stainless steel (1.4404 / 316L); PA; FKM; FVMQ
Materials (wetted parts) PTFE; EPDM
Process connection G 1 Aseptoflex Vario
Surface characteristics Ra/Rz of the wetted parts < 0.76
 
Remarks
Notes An IO-Link master and a parameter setting software (e.g. moneo or LR DEVICE) are required for initial set-up.
Pack quantity 1 pcs.
 
Electrical connection
Connection Connector: 1 x M12; Contacts: gold-plated

 

 

Read more...

To contact ifm efector about IFM Efector Radar Level Sensor | LW2720 use Get a quote.

Features: 

  • 80 GHz frequency enables level measurement with millimetre precision of up to 10 metres
  • Non-contact measuring principle: no malfunctions due to deposits or wear
  • Certified for use in hygienic areas
  • Simple installation and maintenance-free operation
  • Remote sensor parameter setting and level monitoring via connection to the IT system  (NOTE: An IO-Link master and a parameter setting software (e.g. moneo or LR DEVICE) are required for initial set-up)

 

Product characteristics
Number of inputs and outputs Number of digital outputs: 1; Number of analogue outputs: 1
Process connection G 1 Aseptoflex Vario
 
Application
Special feature Gold-plated contacts
Dielectric constant of the medium ≥ 2
Recommended media water; hydrous media
Medium temperature [°C] -40...150; (see diagram:)
Maximum speed of the change of level [mm/s] 200
Pressure rating [bar] 8
Note on pressure rating
0 bar at medium temperature < - 20 C
Vacuum resistance [mbar] -1000
MAWP (for applications according to CRN) [bar] 8
Radio approval for Australia; USA; Canada; EU/RED; New Zealand
Note on radio approval
The list of countries applying the European Radio Equipment Directive 2014/53/EU (RED) can be found under “Downloads”.    
 
Electrical data
Operating voltage [V] 18...30 DC
Current consumption [mA] < 80
Protection class III
Reverse polarity protection yes
Power-on delay time [s] < 15
Measuring principle FMCW (80 GHz technology); frequency range 77 - 81 Hz
 
Inputs / outputs
Number of inputs and outputs Number of digital outputs: 1; Number of analogue outputs: 1
 
Outputs
Total number of outputs 2
Output signal switching signal; analogue signal; IO-Link
Electrical design PNP/NPN
Number of digital outputs 1; (2 parameterisable)
Output function normally open / normally closed; (parameterisable)
Max. voltage drop switching output DC [V] 2.5
Permanent current rating of switching output DC [mA] 50
Number of analogue outputs 1
Analogue current output [mA] 4...20, invertible; (scalable)
Max. load [Ω] 43,5 * (Ub – 18) – 600 Ω
Short-circuit protection yes
Type of short-circuit protection pulsed
Overload protection yes
 
Measuring/setting range
Measuring range [m] 0.01...10
Sampling rate [Hz] > 3
 
Accuracy / deviations
Accuracy
± 2 mm
Resolution [mm] 1
Zero signal (current) [mA] 3.8
Full signal (current) [mA] 20.5
Temperature drift per 10 K ± 1 mm
 
Response times
Response time [ms] 330
 
Interfaces
Communication interface IO-Link
Transmission type COM2 (38,4 kBaud)
IO-Link revision 1.1
SDCI standard IEC 61131-9
Profiles Smart Sensor ED2: SSCs (0x8001), Measuring Sensor (0x000A)
SIO mode yes
Required master port type A
Process data analogue 1
Process data binary 2
Min. process cycle time [ms] 6
Supported DeviceIDs
Type of operation DeviceID
Default 0x00052C
 
Operating conditions
Ambient temperature [°C] -40...80
Note on ambient temperature
see diagram:
Storage temperature [°C] -40...90
Protection IP 68; IP 69K
 
Tests / approvals
EMC
DIN EN 61326-1 group 1: Class A (IO-Link active); B (IO-Link not active, with analogue and switching outputs)
Shock resistance
DIN EN 60068-2-27 50 g (11 ms) / 20 g (6 ms)
Vibration resistance
IEC 61298-3 2 g (10...1000 Hz)
 
Mechanical data
Weight [g] 627
Materials stainless steel (1.4404 / 316L); PA; FKM; FVMQ
Materials (wetted parts) PTFE; EPDM
Process connection G 1 Aseptoflex Vario
Surface characteristics Ra/Rz of the wetted parts < 0.76
 
Remarks
Notes An IO-Link master and a parameter setting software (e.g. moneo or LR DEVICE) are required for initial set-up.
Pack quantity 1 pcs.
 
Electrical connection
Connection Connector: 1 x M12; Contacts: gold-plated

 

 

Read less...

To contact ifm efector about IFM Efector Radar Level Sensor | LW2720 use Get a quote.

Get a quote
Let ifm efector provide you with a quote
Supplier
Get a quote
Supplier: ifm efector
Location: Mulgrave, VIC
Is this your product? Manage products / company details |
Report this product
More from this supplier
See all 14 items
Vision Sensor - 3D | O3M171

Vision Sensor - 3D | O3M171

 Vibration Sensor | VVB001

Vibration Sensor | VVB001

 Compact Speed Sensor for Hazardous Areas | DI602A

Compact Speed Sensor for Hazardous Areas | DI602A

 Self-Monitoring Temperature Sensor | TCC501

Self-Monitoring Temperature Sensor | TCC501

 Flow Sensor | SA5000

Flow Sensor | SA5000

 Compressed Air Meter | SDG207

Compressed Air Meter | SDG207

 Radar Level Sensor | LW2720

Radar Level Sensor | LW2720

 Pressure Sensor with Display | PN7071

Pressure Sensor with Display | PN7071

 Ultrasonic Diffuse Reflection Sensor | UIT507

Ultrasonic Diffuse Reflection Sensor | UIT507

 Position Sensor for Rising Stem Valves | IX5010

Position Sensor for Rising Stem Valves | IX5010

 AS-Interface Inductive Sensor | IM5118

AS-Interface Inductive Sensor | IM5118

 Capacitive High-temperature Sensor | KN5121

Capacitive High-temperature Sensor | KN5121

 IO-Link Position Sensors | OPD101

IO-Link Position Sensors | OPD101

 Inductive High-temperature Sensor | I95045

Inductive High-temperature Sensor | I95045
Related articles from this supplier
Precise & Convenient: Radar Level Sensor with IO-Link
Precise & Convenient: Radar Level Sensor with IO-Link
You might also like these
Intelligent Corrosive Radar Level sensor

Intelligent Corrosive Radar Level sensor

 Intelligent Sanitary Radar Level sensor

Intelligent Sanitary Radar Level sensor

 Intelligent Solid Radar Level sensor

Intelligent Solid Radar Level sensor

 Intelligent Flange Radar Level sensor

Intelligent Flange Radar Level sensor

 Electro-Optic Liquid Level Sensor | ELS-1100

Electro-Optic Liquid Level Sensor | ELS-1100

 Electro-Optic Liquid Level Sensor - ELS-1200

Electro-Optic Liquid Level Sensor - ELS-1200

 Radar Level Sensor

Radar Level Sensor

 Battery Fluid Level Sensors

Battery Fluid Level Sensors

 Liquid Level Sensor - Model BI-2000 series

Liquid Level Sensor - Model BI-2000 series

 KSR Level Sensors / Transmitters

KSR Level Sensors / Transmitters

 Level Sensor / Transmitter - Spherical Floats from KSR

Level Sensor / Transmitter - Spherical Floats from KSR

 Level Sensor | Continuous System - TORRIX

Level Sensor | Continuous System - TORRIX

 KTE6000CS Hydrostatic Liquid Level Sensors

KTE6000CS Hydrostatic Liquid Level Sensors

 Sensors | Liquid Level Sensor 0-10m

Sensors | Liquid Level Sensor 0-10m

 Easy Maintenance Level Sensor by BD Sensors | LMK 358H

Easy Maintenance Level Sensor by BD Sensors | LMK 358H

 Level Sensor for Confined Spaces by BD Sensors | LMK 806

Level Sensor for Confined Spaces by BD Sensors | LMK 806

 Radar Level Sensor | VEGAPULS WL 61

Radar Level Sensor | VEGAPULS WL 61

 Radar Level Sensor | VEGAPULS SR 68

Radar Level Sensor | VEGAPULS SR 68

 Water Level Sensor Radar HyQuant L

Water Level Sensor Radar HyQuant L
Contact ifm efector
Radar Level Sensor in Melbourne
Radar Level Sensor in Adelaide
Radar Level Sensor in Sydney
Radar Level Sensor in Darwin
Radar Level Sensor in Brisbane
Radar Level Sensor in Perth
Are you a Radar Level Sensor supplier?
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales
learn more