Eltek - Temperature Transmitters w/ Inputs | Digital RH & Temperature Sensors

Supplier: Connected IoT

Temperature Transmitters w/ Inputs | Digital RH & Temperature Sensors

Transmitters with inputs for digital RH and temperature sensors

20 Recent Views In Stock

13E and 14E Series

GC13E / GD13E
Wired socket for 1 x RHT10E RH/T probe. This high specification RH and temperature probe can be placed precisely where needed.
'C' indicates standard case without display.
D' indicates display.

GDM13E - with backup memory

The GenII M series retains the standard GenII transmitter specification and adds 12,000 readings of built-in backup memory. The memory is used in continuous overwrite mode. This means many weeks of data can be held in the transmitter, depending on the number of channels in use.

GD14E - with additional thermistor inputs

Wired socket for 1 x RHT10E RH/T probe and 2 x thermistor temperatureÂ probes (-40 to +70°C) with display.

LM14E Logmitter

The GenII Logmitter is a series of devices from Eltek that can be configured as a GenII transmitter or standalone datalogger.
Configured as a logger and deployed alone, it is ideal for smaller spaces and short term or temporary events in sites such as galleries or laboratories. For large buildings, e.g. city block museums, storage areas or research laboratories, it can be deployed as a transmitter alongside other GenII transmitters.

Accessories

WBG Wall bracket docking kit

This kit enables fitment of the transmitter's built-in wall bracket to difficult or uneven surfaces. The kit provides additional docking security.

The following products are supported:

All GD, GC, GL and GS series transmitters
RP250GD repeater and RC250 receiver

To contact Connected IoT about Eltek Temperature Transmitters w/ Inputs | Digital RH & Temperature Sensors use Get a quote.

13E and 14E Series

GC13E / GD13E
Wired socket for 1 x RHT10E RH/T probe. This high specification RH and temperature probe can be placed precisely where needed.
'C' indicates standard case without display.
D' indicates display.

GDM13E - with backup memory

The GenII M series retains the standard GenII transmitter specification and adds 12,000 readings of built-in backup memory. The memory is used in continuous overwrite mode. This means many weeks of data can be held in the transmitter, depending on the number of channels in use.

GD14E - with additional thermistor inputs

Wired socket for 1 x RHT10E RH/T probe and 2 x thermistor temperatureÂ probes (-40 to +70°C) with display.

LM14E Logmitter

The GenII Logmitter is a series of devices from Eltek that can be configured as a GenII transmitter or standalone datalogger.
Configured as a logger and deployed alone, it is ideal for smaller spaces and short term or temporary events in sites such as galleries or laboratories. For large buildings, e.g. city block museums, storage areas or research laboratories, it can be deployed as a transmitter alongside other GenII transmitters.

Accessories

WBG Wall bracket docking kit

This kit enables fitment of the transmitter's built-in wall bracket to difficult or uneven surfaces. The kit provides additional docking security.

The following products are supported:

All GD, GC, GL and GS series transmitters
RP250GD repeater and RC250 receiver

Read less...

To contact Connected IoT about Eltek Temperature Transmitters w/ Inputs | Digital RH & Temperature Sensors use Get a quote.

Let Connected IoT provide you with a quote

Supplier

Get a quote

Supplier: Connected IoT

Distribution: Australia & New Zealand

Location: Cremorne Point, NSW

Customers: Hospitals, Pharmacies, Government Departments.

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Connected IoT are also proudly displaying these credentials:

Established:

2018

Employees:

1-5

Customers:

Hospitals, Pharmacies, Government Departments.

Memberships:

AIRAH, SACC, IoTAA

Distribution:

Australia & New Zealand

Location:

Cremorne Point , NSW