Cassel - Metal Shark® Combi Tu | Conveyor Belt Metal Detector

Metal Shark® Combi Tu | Conveyor Belt Metal Detector

Metal Shark® Combi Tu | Conveyor Belt Metal Detector

Metal Shark® Combi Tu | Conveyor Belt Metal Detector

Metal Shark® Combi Tu | Conveyor Belt Metal Detector

Metal Shark® Combi Tu | Conveyor Belt Metal Detector

• Detects metal contaminants in plates and webs
• Precise metal detection with multi-segment sensor saves valuable material
• Highest sensitivity through 4-quadrant technology
• Intuitive control and easy setup with autocalibration and Teach Assistant
• Maintenance-free through automatic balance and calibration control

Features

• Maximum inspection performance with highest reliability in the entire detection area due to 4-quadrant technology
• Sensitivity: Detects iron from 0.6 mm and stainless steel from 0.7 mm
• Simple setup with TeachAssistant
• Documentation of all events and metal messages
• Memory spaces for up to 250 products
• Optional: Data transfer to USB interface or connection to the company network via SHARKNET^® software
• Cyclical function monitoring with Performance Validation System (PVS)
• Easy to use with intuitive and multilingual menus
• 4-level password system, automatic log out after time lapse
• Detects the position of the metal contamination in the fabric

Function

The METAL SHARK® COMBI TU is a multi-segment sensor typically used over fabric, non-woven or paper webs as well as plates of different materials. It detects the smallest metal particles from 0.6 mm and localizes their position in defined segments of the product.

The METAL SHARK® COMBI TU is suitable for widths up to 5 m/16.6 ft and more available. It can be easily operated in humid environments with ambient temperatures from -10°C to +40°C and product temperatures up to 65°C.

Specifications

• Electronics
  Digital signal processor, digital frequency generation, digital balance control, automatic calibration, digital noise filters, integrated flexible control functions
• Input Signals
  2 analogue 0…10 VDC (option: 4-20 mA), 8 freely configurable 24 V DC signals, e.g. for encoders, product recognition, buttons
• Output Signals
  2 potential-free changeover contacts: “Error” and “Metal”, 8 freely configurable 24 V DC signals, e.g. solenoid valve, optical/acoustic alarm
• Inspection Method
  High-frequency magnetic field, multi-channel operation, balanced receiver coils
• Metal detection
  Iron, non-ferrous (e.g. aluminium, lead etc.) and stainless steel
• Product compensation
  250 memory spaces, automatic product compensation, with TeachAssistant
• Protection type
  IP 65, optional IP66 or IP67
• Ambience
  Standard: -10° C up to +40° C, rel. humidity 30% to 80% (non-condensing), option: down to -40° C or up to +55° C
• Product temperature
  Standard: -30° C up to +40° C, optional: -40° C or up to +60° C
• Power Supply
  1 phase 110-240 VAC, 50/60 Hz, 20 W typ. (60 W max.)
• Power Supply
  230V AC +/-5%, 50/60Hz, 4A (8A max.) or 400V AC +/-5%, 50/60Hz, 4A (10A max.))
• Interface
  RS232, LAN (optional, for SHARKNET), USB (optional)
• Maintenance
  Maintenance-free, sensors calibrate themselves
• Diagnostics
  Integrated diagnostic software, automatic self-test
• Inspection widths
  1,000 mm to 5,000 mm (standard), up to 7,000 mm (optional)
• Aperture height
  28 mm net, The maximum panel thickness of the product depends on the thickness of the product and the deflection, the sum of which must not exceed the net passage height. Example: Net passage height 28 mm – panel thickness 8 mm = max. 20 mm panel deflection
• Sensitivities
  FE 0.6 mm, Al 0.8 mm, SS 0.7 mm - (The sensitivities are highly dependent on the environment in which a metal detector is installed. The sensitivities mentioned here should therefore only be considered as guide values).

Accessories & Extras

The METAL SHARK^® COMBI can be perfectly adapted to your production by various special designs and accessories. Different numbers of sensor plates and widths um to 7,000 mm are possible as well as swiveling traverse arms or an adjustable travrse height.

For your audit reliability, a Performance Verification Certificate can be issued by CASSEL service technicians during commissioning or maintenance.

• SHARKNET®
  The SHARKNET® software connects METAL SHARK® metal detectors to a central computer and offers central storage of all operating data as well as batch and alarm documentation for HACCP and IFS conformity.
• AutoSens
  Signal transfer of belt speed and mat height from the system control for automatic adjustment of the detector sensitivity.
• Temperature extension cold
  Temperature range extended to -40°C, cold-elastic grouting material, insulation, switch cabinet heating and other measures.
• Temperature extension hot
  Temperature range extended to +55° C, adaptation of control cabinet, additional thermal insulation, replacement of filter fan, heat exchanger and/or active cooling units.
• High temperature extension for product
  Product temperature up to max. +120°C, with this option, the sensor has protection class IP54.
• Fast Power Drive (FPD)
  Significantly improves metal detection and reliability in industrial environments that do not meet electromagnetic compatibility standards, with different IP protection classes and ATEX Zone 22 possible.
• Super Power Drive (SPD)
  Improves metal detection by -0.5 to -1 mm in industrial environments that do not meet the standards for electromagnetic compatibility, with various IP protection classes and ATEX Zone 22 possible.
• Signalling devices (optical/acoustic)
  Stacking lights and signal horns/sirens available in different versions and IP protection classes.

Delivery Scope

• Detection unit (sensor) COMBI TU with freely selectable number of detection units and widths from 2 to 7 m
• Controller METAL SHARK®, PC with Windows Pro, 15″ monitor and keyboard in control cabinet

Application

• Products that are conveyed in webs or plates
• Quality assurance for incoming goods, outgoing goods or during running production
• Machine and/or product protection in panel processing
• Detection of broken needles and other metal parts in the textile and nonwoven industry

Read more...

To contact OFI Weigh & Inspection about Cassel Metal Shark® Combi Tu | Conveyor Belt Metal Detector use Get a quote.

• Detects metal contaminants in plates and webs
• Precise metal detection with multi-segment sensor saves valuable material
• Highest sensitivity through 4-quadrant technology
• Intuitive control and easy setup with autocalibration and Teach Assistant
• Maintenance-free through automatic balance and calibration control

Features

• Maximum inspection performance with highest reliability in the entire detection area due to 4-quadrant technology
• Sensitivity: Detects iron from 0.6 mm and stainless steel from 0.7 mm
• Simple setup with TeachAssistant
• Documentation of all events and metal messages
• Memory spaces for up to 250 products
• Optional: Data transfer to USB interface or connection to the company network via SHARKNET^® software
• Cyclical function monitoring with Performance Validation System (PVS)
• Easy to use with intuitive and multilingual menus
• 4-level password system, automatic log out after time lapse
• Detects the position of the metal contamination in the fabric

Function

The METAL SHARK® COMBI TU is a multi-segment sensor typically used over fabric, non-woven or paper webs as well as plates of different materials. It detects the smallest metal particles from 0.6 mm and localizes their position in defined segments of the product.

The METAL SHARK® COMBI TU is suitable for widths up to 5 m/16.6 ft and more available. It can be easily operated in humid environments with ambient temperatures from -10°C to +40°C and product temperatures up to 65°C.

Specifications

• Electronics
  Digital signal processor, digital frequency generation, digital balance control, automatic calibration, digital noise filters, integrated flexible control functions
• Input Signals
  2 analogue 0…10 VDC (option: 4-20 mA), 8 freely configurable 24 V DC signals, e.g. for encoders, product recognition, buttons
• Output Signals
  2 potential-free changeover contacts: “Error” and “Metal”, 8 freely configurable 24 V DC signals, e.g. solenoid valve, optical/acoustic alarm
• Inspection Method
  High-frequency magnetic field, multi-channel operation, balanced receiver coils
• Metal detection
  Iron, non-ferrous (e.g. aluminium, lead etc.) and stainless steel
• Product compensation
  250 memory spaces, automatic product compensation, with TeachAssistant
• Protection type
  IP 65, optional IP66 or IP67
• Ambience
  Standard: -10° C up to +40° C, rel. humidity 30% to 80% (non-condensing), option: down to -40° C or up to +55° C
• Product temperature
  Standard: -30° C up to +40° C, optional: -40° C or up to +60° C
• Power Supply
  1 phase 110-240 VAC, 50/60 Hz, 20 W typ. (60 W max.)
• Power Supply
  230V AC +/-5%, 50/60Hz, 4A (8A max.) or 400V AC +/-5%, 50/60Hz, 4A (10A max.))
• Interface
  RS232, LAN (optional, for SHARKNET), USB (optional)
• Maintenance
  Maintenance-free, sensors calibrate themselves
• Diagnostics
  Integrated diagnostic software, automatic self-test
• Inspection widths
  1,000 mm to 5,000 mm (standard), up to 7,000 mm (optional)
• Aperture height
  28 mm net, The maximum panel thickness of the product depends on the thickness of the product and the deflection, the sum of which must not exceed the net passage height. Example: Net passage height 28 mm – panel thickness 8 mm = max. 20 mm panel deflection
• Sensitivities
  FE 0.6 mm, Al 0.8 mm, SS 0.7 mm - (The sensitivities are highly dependent on the environment in which a metal detector is installed. The sensitivities mentioned here should therefore only be considered as guide values).

Accessories & Extras

The METAL SHARK^® COMBI can be perfectly adapted to your production by various special designs and accessories. Different numbers of sensor plates and widths um to 7,000 mm are possible as well as swiveling traverse arms or an adjustable travrse height.

For your audit reliability, a Performance Verification Certificate can be issued by CASSEL service technicians during commissioning or maintenance.

• SHARKNET®
  The SHARKNET® software connects METAL SHARK® metal detectors to a central computer and offers central storage of all operating data as well as batch and alarm documentation for HACCP and IFS conformity.
• AutoSens
  Signal transfer of belt speed and mat height from the system control for automatic adjustment of the detector sensitivity.
• Temperature extension cold
  Temperature range extended to -40°C, cold-elastic grouting material, insulation, switch cabinet heating and other measures.
• Temperature extension hot
  Temperature range extended to +55° C, adaptation of control cabinet, additional thermal insulation, replacement of filter fan, heat exchanger and/or active cooling units.
• High temperature extension for product
  Product temperature up to max. +120°C, with this option, the sensor has protection class IP54.
• Fast Power Drive (FPD)
  Significantly improves metal detection and reliability in industrial environments that do not meet electromagnetic compatibility standards, with different IP protection classes and ATEX Zone 22 possible.
• Super Power Drive (SPD)
  Improves metal detection by -0.5 to -1 mm in industrial environments that do not meet the standards for electromagnetic compatibility, with various IP protection classes and ATEX Zone 22 possible.
• Signalling devices (optical/acoustic)
  Stacking lights and signal horns/sirens available in different versions and IP protection classes.

Delivery Scope

• Detection unit (sensor) COMBI TU with freely selectable number of detection units and widths from 2 to 7 m
• Controller METAL SHARK®, PC with Windows Pro, 15″ monitor and keyboard in control cabinet

Application

• Products that are conveyed in webs or plates
• Quality assurance for incoming goods, outgoing goods or during running production
• Machine and/or product protection in panel processing
• Detection of broken needles and other metal parts in the textile and nonwoven industry

Read less...

To contact OFI Weigh & Inspection about Cassel Metal Shark® Combi Tu | Conveyor Belt Metal Detector use Get a quote.

CASSEL-Metal-detector-COMBI-TU-DS-EN-200410(0.41MB)