Astro GalvBar Galvanising Alloy Welding Electrode

Astro GalvBar Galvanising Alloy Welding Electrode

Astro GalvBar Galvanising Alloy has the following:

Applications

• Primarily used to restore galvanised areas of sheet steel, angle iron, and other areas that have been welded or cut with an oxyacetylene torch. 
• It can also be used to protect structures that are too large or too costly to disassemble and dip in galvanising tanks.

Features

• low temperature galvanising rod
• Excellent corrosion resistance
• Requires no special equipment
• Melts at 315 C (600 F)
• Easy to apply
• Non-fuming
• Not brittle

Welding Procedures:

• Chip all slag from welds and wire brush loose scale from areas to be coated.
• No flux is required.
• While the metal is still hot, run Galvbar over the hot surface.
• If the metal has cooled below 300 C, additional heat may be applied with a torch.
• Spread the alloy over the surface with a brush or paddle.
• Do not heat the alloy directly with a torch.

For more information please call or use the IndustrySearch Email form for a fast and direct reply.

To contact Astro Alloys about Astro GalvBar Galvanising Alloy Welding Electrode use Get a quote.

Astro GalvBar Galvanising Alloy has the following:

Applications

• Primarily used to restore galvanised areas of sheet steel, angle iron, and other areas that have been welded or cut with an oxyacetylene torch. 
• It can also be used to protect structures that are too large or too costly to disassemble and dip in galvanising tanks.

Features

• low temperature galvanising rod
• Excellent corrosion resistance
• Requires no special equipment
• Melts at 315 C (600 F)
• Easy to apply
• Non-fuming
• Not brittle

Welding Procedures:

• Chip all slag from welds and wire brush loose scale from areas to be coated.
• No flux is required.
• While the metal is still hot, run Galvbar over the hot surface.
• If the metal has cooled below 300 C, additional heat may be applied with a torch.
• Spread the alloy over the surface with a brush or paddle.
• Do not heat the alloy directly with a torch.

For more information please call or use the IndustrySearch Email form for a fast and direct reply.

Read less...

To contact Astro Alloys about Astro GalvBar Galvanising Alloy Welding Electrode use Get a quote.