The AL-HP2625 3 car stacker is a low-profile version of the popular HP2525, and is a fantastic option when roof height is limited.
Description
Documents
3 Car Stacker Low Roof Height
In Stock
3 Car Stacker – 4500kg
The AL-HP2625 3 car stacker is a low-profile version of the popular HP2525, and is a fantastic option when roof height is limited. The HP2625 is designed to conveniently allow you to stack 3 vehicles when limited space is available. With a total lifting capacity of 4500kg (2500kg first platform/2000kgs second platform) and a generous headroom between platforms of 1600mm and 1850mm under the lower platform.
Designed to withstand tough Australian conditions with a high-quality powder-coated finish and galvanised trays you can rest assured the range of HP car stackers is one of the best on the market!
Simple key switch operation makes it a breeze to operate and is ideal for various parking applications such as workshops, office buildings, valet parking, car rental locations, vehicle service centers or anywhere extra parking is required.
Features a low 150mm drive on-ramp for easy loading of vehicles.
Easy to operate key-operated control box, fitted with an emergency stop button.
Low Voltage 24v Controls.
Available in single and three-phase power options.
Powerful 3kw hydraulic pump.
Optional Galvanised trays between each set of platform ramps.
Ramp stop plates located on each platform.
AAQ recommends 200mm 25-32MPA Concrete for the AL-HP2625 Car Stacker
AL-HP2625 3 Car Stacker Operation
The HP2625 uses a much simpler and more reliable system than some competitors on the market, the lower platform is the master platform and is used to push/lift the upper platform up onto its locks.
Once the upper platform reaches the top of the column the four locks engage securing the platform in place. The lower platform is lowered down to the ground for the second car to be loaded. The lower platform can then be raised to the desired height.
A full locking ladder is incorporated into each column for the lower platform locks to engage in when rested. A safety limit switch will cut the operation of the platform at 1850mm from the ground. To take the vehicle higher simply turn the key switch back to center and back to raise – be careful when exceeding the safety limit switch height so accidental crashing of the vehicle to the upper platform does not occur.
Features
Easy installation
Overlap platform design
Key switch operation
Powder coated
Semi automatic lock release
Emergency stop button
4000mm/min lowering time (without load)
Specifications
Lifting Capacity: 2500kg first platform/ 2000kgs second platform
To contact AAQ Australia - Advance AutoQuip about AAQ Autolift Car Stacker Post Parking Lift | 3 Car AL- HP2625 use Get a quote.
3 Car Stacker – 4500kg
The AL-HP2625 3 car stacker is a low-profile version of the popular HP2525, and is a fantastic option when roof height is limited. The HP2625 is designed to conveniently allow you to stack 3 vehicles when limited space is available. With a total lifting capacity of 4500kg (2500kg first platform/2000kgs second platform) and a generous headroom between platforms of 1600mm and 1850mm under the lower platform.
Designed to withstand tough Australian conditions with a high-quality powder-coated finish and galvanised trays you can rest assured the range of HP car stackers is one of the best on the market!
Simple key switch operation makes it a breeze to operate and is ideal for various parking applications such as workshops, office buildings, valet parking, car rental locations, vehicle service centers or anywhere extra parking is required.
Features a low 150mm drive on-ramp for easy loading of vehicles.
Easy to operate key-operated control box, fitted with an emergency stop button.
Low Voltage 24v Controls.
Available in single and three-phase power options.
Powerful 3kw hydraulic pump.
Optional Galvanised trays between each set of platform ramps.
Ramp stop plates located on each platform.
AAQ recommends 200mm 25-32MPA Concrete for the AL-HP2625 Car Stacker
AL-HP2625 3 Car Stacker Operation
The HP2625 uses a much simpler and more reliable system than some competitors on the market, the lower platform is the master platform and is used to push/lift the upper platform up onto its locks.
Once the upper platform reaches the top of the column the four locks engage securing the platform in place. The lower platform is lowered down to the ground for the second car to be loaded. The lower platform can then be raised to the desired height.
A full locking ladder is incorporated into each column for the lower platform locks to engage in when rested. A safety limit switch will cut the operation of the platform at 1850mm from the ground. To take the vehicle higher simply turn the key switch back to center and back to raise – be careful when exceeding the safety limit switch height so accidental crashing of the vehicle to the upper platform does not occur.
Features
Easy installation
Overlap platform design
Key switch operation
Powder coated
Semi automatic lock release
Emergency stop button
4000mm/min lowering time (without load)
Specifications
Lifting Capacity: 2500kg first platform/ 2000kgs second platform