4 Post Car Hoist | AL-6000S2 – Extra Heavy Duty 6000kg
4 Post Car Hoist | AL-6000S2 – Extra Heavy Duty 6000kg
4 Post Car Hoist | AL-6000S2 – Extra Heavy Duty 6000kg
4 Post Car Hoist | AL-6000S2 – Extra Heavy Duty 6000kg
4 Post Car Hoist | AL-6000S2 – Extra Heavy Duty 6000kg
4 Post Car Hoist | AL-6000S2 – Extra Heavy Duty 6000kg
4 Post Car Hoist | AL-6000S2 – Extra Heavy Duty 6000kg
4 Post Car Hoist | AL-6000S2 – Extra Heavy Duty 6000kg
4 Post Car Hoist | AL-6000S2 – Extra Heavy Duty 6000kg
4 Post Car Hoist | AL-6000S2 – Extra Heavy Duty 6000kg
4 Post Car Hoist | AL-6000S2 – Extra Heavy Duty 6000kg
4 Post Car Hoist | AL-6000S2 – Extra Heavy Duty 6000kg
With a lifting capacity of 6000kg / 6 tonnes and extra-long platforms (6.2m), the AL-6000S2 can accommodate a larger range of vehicles.
Description
Documents
6T and extra-long platforms
In Stock
6,000 kg Lifting Capacity
Ideal usage: Automotive Workshops and the Mining Industry
The AL-6000S2 heavy-duty vehicle hoist has been designed specifically for Automotive dealerships and the Mining Industry. With a lifting capacity of 6000kg / 6 tonnes and extra-long platforms (6.2m), the AL-6000S2 can accommodate a larger range of vehicles. Fitted with features such as 2 x 3000kg / 2 tonne hydraulic operated jacking beams, fully enclosed lifting cables and airlocks, fully enclosed power unit and front wheel stops this workhorse of a hoist is ready to tackle the busiest of workshops!
The AL-6000S2 vehicle hoist is an Australian Standard WorkSafe design registered 4 post vehicle hoist and is fitted with multi-position safety locks in each column.
Air requirement: 60-90 PSI
We deliver Australia Wide
WHAT'S INCLUDED
4 post hoist
M18 anchor bolts
3 phase 415v power unit
2 x 3000kg /2 tonne Jacking Beams
Installation Manual
What’s Not Included?
Installation
Hydraulic Oil
Electrical and Air Connections (60-90PSI is required)
Workshop requirements
100mm steel mesh reinforced concrete (25-30 MPA)
Minimum Ceiling height of 3.2m required
(Warranty and Certification
5-year structural warranty*
Australian Standard WorkSafe design registered
Features
WorkSafe Design Registered
Extra Heavy Duty Construction
Extra wide between columns
Extra long rollers on run up ramps
Top column cover caps
Fully enclosed power unit
Air operated jacking beams
Fully enclosed lifting cables and air safety locks
Multi position safety locks in each column
Single hydraulic cylinder mounted underneath runway
Complete with 2 x 3 tonne hydraulic jacking beams
Specifications
Height overall: 2170 mm
Width overall: 3617 mm
Length overall: 7150 mm
Lifting height: 230 -1705 mm
Lifting capacity: 6000 kg
Power: 415V 3 Phase
Net weight: 1300 kg
Gross weight: 1460 kg
Packing Size: 5770*720*830 mm Carton & Jacks: 1000 x 630 x 1300 mm
To contact AAQ Australia - Advance AutoQuip about AAQ Autolift 4 Post Car Hoist | AL-6000S2 – Extra Heavy Duty 6000kg use Get a quote.
6,000 kg Lifting Capacity
Ideal usage: Automotive Workshops and the Mining Industry
The AL-6000S2 heavy-duty vehicle hoist has been designed specifically for Automotive dealerships and the Mining Industry. With a lifting capacity of 6000kg / 6 tonnes and extra-long platforms (6.2m), the AL-6000S2 can accommodate a larger range of vehicles. Fitted with features such as 2 x 3000kg / 2 tonne hydraulic operated jacking beams, fully enclosed lifting cables and airlocks, fully enclosed power unit and front wheel stops this workhorse of a hoist is ready to tackle the busiest of workshops!
The AL-6000S2 vehicle hoist is an Australian Standard WorkSafe design registered 4 post vehicle hoist and is fitted with multi-position safety locks in each column.
Air requirement: 60-90 PSI
We deliver Australia Wide
WHAT'S INCLUDED
4 post hoist
M18 anchor bolts
3 phase 415v power unit
2 x 3000kg /2 tonne Jacking Beams
Installation Manual
What’s Not Included?
Installation
Hydraulic Oil
Electrical and Air Connections (60-90PSI is required)
Workshop requirements
100mm steel mesh reinforced concrete (25-30 MPA)
Minimum Ceiling height of 3.2m required
(Warranty and Certification
5-year structural warranty*
Australian Standard WorkSafe design registered
Features
WorkSafe Design Registered
Extra Heavy Duty Construction
Extra wide between columns
Extra long rollers on run up ramps
Top column cover caps
Fully enclosed power unit
Air operated jacking beams
Fully enclosed lifting cables and air safety locks
Multi position safety locks in each column
Single hydraulic cylinder mounted underneath runway
Complete with 2 x 3 tonne hydraulic jacking beams
Specifications
Height overall: 2170 mm
Width overall: 3617 mm
Length overall: 7150 mm
Lifting height: 230 -1705 mm
Lifting capacity: 6000 kg
Power: 415V 3 Phase
Net weight: 1300 kg
Gross weight: 1460 kg
Packing Size: 5770*720*830 mm Carton & Jacks: 1000 x 630 x 1300 mm