Yamato - Laboratory Incubator | IJ101

Laboratory Incubator | IJ101

Laboratory Incubator | IJ101

Features of Low Temperature Incubator (Programmable, Peltier Cooling) (IJ101)

• Highly functional fixed temp. incubator with varying capacity.
• A compact model ideal for preserving samples and for constant temperature testing
• A CFC-free, low-vibration model with a cooler equipped with peltier elements
• Uses a programmable temperature controller (IJ201/300)
• Has a convenient pre-reset temperature function ( as an option)
• Air jacket can be attached as an option
• Two units can be stacked by the stacking support (Option)
• The IJ101W observation window uses environmentally friendly glass made from combination of energy-saving pair glsass and half-tempered glass, which prevents wasteful heat loss
• A sliding mounting table can be provided with the IJ300 model ( as an option) for convenience when setting a microshaker inside and when adding / removing samples. The service outlet on the side of the unit does not require any wiring. A shaker cannot be set in the IJ101W model.
• Safety has been enhanced with the addition of a self-diagnostic function, an overheat prevention device and an over-current circuit breaker.

Specifications

Item Code	221164
Model	IJ101
Type	Forced convection
Operating Temperature Range	5~60?(at room temp.25?)
Temp. Control Accuracy	±0.3?(at 37?)
Temp. Distribution Accuracy	±1.0?(at 37?)
Time to Max. Temp.	20~60? 60min.
Time to Lowest Temp.	20~5? 100min.
Interior	Stainless steel
Heater	Mica heater 120W
Condenser	Peltiert element, Forced radiation type
Temp. Control Method	PID
Operation Function	Program operation (30 steps x 1, 15 steps x 2, 10 steps x 3), Fixed operation, Quick auto-stop, Auto-stop, Auto-start operation
Additional Functions	Calibration off-set, Key-lock function, Auto recovery function at power failure
Sensor	Double sensor: Platinum resistance Pt 100Ω (Temp. controller), K-thermocouple(Overheat preventor)
Safety Functions	Self-diagnostic function(Temp. sensor error, heater failure, SSR short-circuit, Auto overheat), Overheat prevention(IJ201/301), Liquid pressure overheat preventor, Over-current ELB, Main relay error
Shelf Loading Capacity	Approx. 5kg/ shelf
Shelf Step	7 steps
Accessories	Shelf(Stainless punching metal) 2pcs., Shelf support 4 pcs., Receiver for drain 1pc.
Internal dimensions(W×D×H mm)	250×250×250mm
External dimensions(W×D×H mm)	350×399×565mm
Remarks(dimensions)	15.6L
Power Source	AC115V/AC220V single phase with step-down transformer
Weight	20kg

Maintenance and Warranty

Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.

Read more...

To contact Banksia Scientific Company about Yamato Laboratory Incubator | IJ101 use Get a quote.

Features of Low Temperature Incubator (Programmable, Peltier Cooling) (IJ101)

• Highly functional fixed temp. incubator with varying capacity.
• A compact model ideal for preserving samples and for constant temperature testing
• A CFC-free, low-vibration model with a cooler equipped with peltier elements
• Uses a programmable temperature controller (IJ201/300)
• Has a convenient pre-reset temperature function ( as an option)
• Air jacket can be attached as an option
• Two units can be stacked by the stacking support (Option)
• The IJ101W observation window uses environmentally friendly glass made from combination of energy-saving pair glsass and half-tempered glass, which prevents wasteful heat loss
• A sliding mounting table can be provided with the IJ300 model ( as an option) for convenience when setting a microshaker inside and when adding / removing samples. The service outlet on the side of the unit does not require any wiring. A shaker cannot be set in the IJ101W model.
• Safety has been enhanced with the addition of a self-diagnostic function, an overheat prevention device and an over-current circuit breaker.

Specifications

Item Code	221164
Model	IJ101
Type	Forced convection
Operating Temperature Range	5~60?(at room temp.25?)
Temp. Control Accuracy	±0.3?(at 37?)
Temp. Distribution Accuracy	±1.0?(at 37?)
Time to Max. Temp.	20~60? 60min.
Time to Lowest Temp.	20~5? 100min.
Interior	Stainless steel
Heater	Mica heater 120W
Condenser	Peltiert element, Forced radiation type
Temp. Control Method	PID
Operation Function	Program operation (30 steps x 1, 15 steps x 2, 10 steps x 3), Fixed operation, Quick auto-stop, Auto-stop, Auto-start operation
Additional Functions	Calibration off-set, Key-lock function, Auto recovery function at power failure
Sensor	Double sensor: Platinum resistance Pt 100Ω (Temp. controller), K-thermocouple(Overheat preventor)
Safety Functions	Self-diagnostic function(Temp. sensor error, heater failure, SSR short-circuit, Auto overheat), Overheat prevention(IJ201/301), Liquid pressure overheat preventor, Over-current ELB, Main relay error
Shelf Loading Capacity	Approx. 5kg/ shelf
Shelf Step	7 steps
Accessories	Shelf(Stainless punching metal) 2pcs., Shelf support 4 pcs., Receiver for drain 1pc.
Internal dimensions(W×D×H mm)	250×250×250mm
External dimensions(W×D×H mm)	350×399×565mm
Remarks(dimensions)	15.6L
Power Source	AC115V/AC220V single phase with step-down transformer
Weight	20kg

Maintenance and Warranty

Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.

Read less...

To contact Banksia Scientific Company about Yamato Laboratory Incubator | IJ101 use Get a quote.

Brochure(1.19MB)