Temperature Indicator | Thermal Disinfection | Self Adhesive Strips

The Temperature Indicator | Thermal Disinfection | Self Adhesive Strips is able to withstand the extreme conditions within an Industrial Dishwasher.

An irreversible colour change from white/grey to black when standard dish washer (65°C), thermal/chemical disinfection (71ºC) or thermal disinfection (82°C) temperatures have been reached.

Benefits of Temperature Indicator | Thermal Disinfection | Self Adhesive Strips:

• Inexpensive and easy to use.

• Accurate to ±1°C of rated temperature.

• Give permanent record of thermal disinfection temperature achieved.

• Form part of HACCP procedures for evidence of due diligence

• Demonstrated two days after a routine 3 monthly maintenance check that a water heater was only capable of heating to 40 ºC at a hospital in the south UK.

Physical Properties of Temperature Indicator | Thermal Disinfection | Self Adhesive Strips:

Adhesive Type:

Acrylic with clear polyester carrier

Covering Film:

50 µm Polyester

Size:

25mm x 35mm

Colour Change Material:

Non toxic, white crystalline melt material coated on a black absorbent backing.

Application:

Peel label from backing paper. Apply to clean, dry surface. Ideally a plate or stainless steel surface in the middle of the dishwasher rack. Ensure the entire indicator is in contact with the surface. Remove indicator whilst surface is still warm.

Shelf Life:

12 months from invoice date when stored at room temperature and humidity (i.e. 21°C (70°F) & 50% relative humidity)

To contact Measure-Tech Australia about Temperature Indicator | Thermal Disinfection | Self Adhesive Strips use Get a quote.

An irreversible colour change from white/grey to black when standard dish washer (65°C), thermal/chemical disinfection (71ºC) or thermal disinfection (82°C) temperatures have been reached.

Benefits of Temperature Indicator | Thermal Disinfection | Self Adhesive Strips:

• Inexpensive and easy to use.

• Accurate to ±1°C of rated temperature.

• Give permanent record of thermal disinfection temperature achieved.

• Form part of HACCP procedures for evidence of due diligence

• Demonstrated two days after a routine 3 monthly maintenance check that a water heater was only capable of heating to 40 ºC at a hospital in the south UK.

Read less...

To contact Measure-Tech Australia about Temperature Indicator | Thermal Disinfection | Self Adhesive Strips use Get a quote.

Let Measure-Tech Australia provide you with a quote

Supplier

Get a quote

Supplier: Measure-Tech Australia

Location: Tullamarine, VIC

Is this your product? Manage products / company details |

Report this product

Temperature Indicator | Thermal Disinfection | Self Adhesive Strips

The Temperature Indicator | Thermal Disinfection | Self Adhesive Strips is able to withstand the extreme conditions within an Industrial Dishwasher.

Triple Level Thermal Disinfection Indicator - T.D.I.

Test & Tag Solutions | SAFE T CHECK Pro Logger II