SP-16G Swimming Pool Ozone Generator

SP-16G Swimming Pool Ozone Generator

The SP Series is designed to integrate smoothly into your swimming pool system via ozone injection method. These units are designed in 3g, 5g, 8g, and 16g/hr ozone output to correspond to your pool size. The SP-16G model outputs 16g/ozone per hour and is ideal for pools (or other large water applications) up to 760,000 litres (for mild/cooler climate) or up to 400,000 litres (for tropical/warmer climate).

SP-16G Swimming Pool Ozone Generator

If you are tired of itchy, irritated eyes and skin from chlorine and chemicals- then it is time to try OZONE! Ozone is faster and more effective than chlorine at killing bacteria because chlorine needs to diffuse through the cell wall and disrupt bacteria metabolism. Ozone rips open the cell wall from the outside, causing the cell contents to fall apart (This process is called cell lysing). With ozone, after the destruction of the cell, 03 simply reverts back to 02. The additional oxygen in the water creates a safe, clean and refreshing swimming experience that only ozone can provide. There are no toxic or hazardous by-products!

The SP series feature units designed specifically for swimming pool or large water treatment applications. These units are designed with higher ozone outputs that correspond to the amount of water being treated. Our SP-16 model outputs 16 g/h ozone (with oxygen source) and is ideal for water applications (or pools) up to 200,000 gallons or 760,000 litres.

Features

• CD Corona Discharge
• Air-Cooled
• LED status indicators
• Variable Ozone Output (10-100%)
• PTFE tube for O3 outlet
• Stainless steel fittings
• Ozone concentration knob to control the ozone % produced by the unit
• AMP meter to show real time AMP usage
• Flow meter to show suction amount created by the venturi (measured in LPM)

Specifications

• Ozone Output: Up to 16 g/hr with Oxygen Source; 3200 mg/hr without Oxygen Source
• Concentration: g/m3 Oxygen: 25-45 Air: 5-15
• Electric Voltages: 220/240 or 110/120 VAC 50/60 Hz
• Power Watt: 190 Watts
• Size: 15x8x18 inches
• Weight: 10.5 kg

Important: These units are not waterproof. Please try to refrain from getting them wet.

Please Note: Operate with good ventilation.

Please note: Keep away from gas or other flammable chemicals as it could be an extreme fire hazard. 

Contents

• SP Swimming Pool Ozone Generator
• SP Swimming Pool operating manual
• Flexible tubing (for optional oxygen supply)
• PTFE tubing (for ozone)
• Spare fuse
• Check Valve (x2)
• Spare Fan filter

For Ozone Safety: Please refer to our ozone safety data sheet.

For Ozone Compatibility : Please refer to our schedule of ozone compatible materials.

Read more...

To contact Pacific Water Technology about SP-16G Swimming Pool Ozone Generator use Get a quote.

The SP Series is designed to integrate smoothly into your swimming pool system via ozone injection method. These units are designed in 3g, 5g, 8g, and 16g/hr ozone output to correspond to your pool size. The SP-16G model outputs 16g/ozone per hour and is ideal for pools (or other large water applications) up to 760,000 litres (for mild/cooler climate) or up to 400,000 litres (for tropical/warmer climate).

SP-16G Swimming Pool Ozone Generator

If you are tired of itchy, irritated eyes and skin from chlorine and chemicals- then it is time to try OZONE! Ozone is faster and more effective than chlorine at killing bacteria because chlorine needs to diffuse through the cell wall and disrupt bacteria metabolism. Ozone rips open the cell wall from the outside, causing the cell contents to fall apart (This process is called cell lysing). With ozone, after the destruction of the cell, 03 simply reverts back to 02. The additional oxygen in the water creates a safe, clean and refreshing swimming experience that only ozone can provide. There are no toxic or hazardous by-products!

The SP series feature units designed specifically for swimming pool or large water treatment applications. These units are designed with higher ozone outputs that correspond to the amount of water being treated. Our SP-16 model outputs 16 g/h ozone (with oxygen source) and is ideal for water applications (or pools) up to 200,000 gallons or 760,000 litres.

Features

• CD Corona Discharge
• Air-Cooled
• LED status indicators
• Variable Ozone Output (10-100%)
• PTFE tube for O3 outlet
• Stainless steel fittings
• Ozone concentration knob to control the ozone % produced by the unit
• AMP meter to show real time AMP usage
• Flow meter to show suction amount created by the venturi (measured in LPM)

Specifications

• Ozone Output: Up to 16 g/hr with Oxygen Source; 3200 mg/hr without Oxygen Source
• Concentration: g/m3 Oxygen: 25-45 Air: 5-15
• Electric Voltages: 220/240 or 110/120 VAC 50/60 Hz
• Power Watt: 190 Watts
• Size: 15x8x18 inches
• Weight: 10.5 kg

Important: These units are not waterproof. Please try to refrain from getting them wet.

Please Note: Operate with good ventilation.

Please note: Keep away from gas or other flammable chemicals as it could be an extreme fire hazard. 

Contents

• SP Swimming Pool Ozone Generator
• SP Swimming Pool operating manual
• Flexible tubing (for optional oxygen supply)
• PTFE tubing (for ozone)
• Spare fuse
• Check Valve (x2)
• Spare Fan filter

For Ozone Safety: Please refer to our ozone safety data sheet.

For Ozone Compatibility : Please refer to our schedule of ozone compatible materials.

Read less...

To contact Pacific Water Technology about SP-16G Swimming Pool Ozone Generator use Get a quote.