Solar Pumps | Hybrid Solar Pumping Systems 28-25 - Max flow 28m3 Price Guide: $3,350 Get latest price

Solar Pumps | Hybrid Solar Pumping Systems 28-25 - Max flow 28m3

32 Recent Views In Stock

The Hybrid range offers great cost saving potentials for both stock & domestic and irrigation use, including 24 hour pumping applications. 

Amongst other new features, the motors on hybrid range of pumps can be connected to either solar panels or mains power. When using the system monitor – the pump can run from solar power during the day & automatically switch to mains power in the evening or poor weather (system monitor sold separately). Also the low water sensor is built into the motor, eliminating the need to run an extra sensor & cable.

Motor & Controller Features

• Connect either mains/generator AC power OR Solar DC power to the same motor wires (not at the same time – this can be done using the system monitor)
• Ultra-wide Solar input voltage range – from 90Vmp-360Vmp
• Connect up to ~ 3kW of solar panels
• Solar array Open Circuit Voltage – 440 VOC
• Up to 2.2kW (2200w) output power
• Internal low water protection – no need to run an extra sensor & cable down to the pump
• Brushless DC permanent magnet motors – optimal efficiency, torque & reliability
• Operating range of 500-3400 RPM – variable frequency control for improved low light performance
• Soft Start – increases pump and motor life & reduces start-up current draw
• Full Protection features: Over-voltage, Over-current, Reverse polarity, Over-head, Lost phase and Under-voltage
• Double shielded motors with ceramic bearings – no mechanical seals, reduced internal friction, better rotor cooling & temperature stability
• Strong stainless steel 304 construction
• Easy set-up with basic installations requiring only the included switch between the solar panels & the pump and a float switch in the tank if required.

Optional System Monitor Features

• Dual Power Input – connect both solar panels and mains or generator power in the monitor
• Automatic Solar priority, switching to AC power in low light – widens the potential for cost saving hybrid solar pumping applications
• Float sensor or Pressure switch input – for automated pumping systems

Specifications

• Maximum Flow Rate – 28m3 or 480L/min with no head resistance (see curve graph above for head & flow performance range)
• Maximum Head Pressure – 25 or 35PSI (where flow drops to 0)
• Motor Power – 2.8HP or 2800w
• Motor & Pump Outer Diameter – 4″
• Pump Outlet Size – 2″ BSP
• Maximum Solar Array Voc – 440v
• Recommended Solar Vmp range – 90v – 360v

Included Components

• 2.8HP / 2800w Motor / Controller & SS Multi-stage Pump head
• Solar panels (if ordered – see selections at top of page)
• 10m Solar panel extension lead with MC4 connectors one end
• Weatherproof solar isolator switch
• Wiring connection guide

Read more...

To contact Commodore Australia about Solar Pumps | Hybrid Solar Pumping Systems 28-25 - Max flow 28m3 use Get a quote.

The Hybrid range offers great cost saving potentials for both stock & domestic and irrigation use, including 24 hour pumping applications. 

Amongst other new features, the motors on hybrid range of pumps can be connected to either solar panels or mains power. When using the system monitor – the pump can run from solar power during the day & automatically switch to mains power in the evening or poor weather (system monitor sold separately). Also the low water sensor is built into the motor, eliminating the need to run an extra sensor & cable.

Motor & Controller Features

• Connect either mains/generator AC power OR Solar DC power to the same motor wires (not at the same time – this can be done using the system monitor)
• Ultra-wide Solar input voltage range – from 90Vmp-360Vmp
• Connect up to ~ 3kW of solar panels
• Solar array Open Circuit Voltage – 440 VOC
• Up to 2.2kW (2200w) output power
• Internal low water protection – no need to run an extra sensor & cable down to the pump
• Brushless DC permanent magnet motors – optimal efficiency, torque & reliability
• Operating range of 500-3400 RPM – variable frequency control for improved low light performance
• Soft Start – increases pump and motor life & reduces start-up current draw
• Full Protection features: Over-voltage, Over-current, Reverse polarity, Over-head, Lost phase and Under-voltage
• Double shielded motors with ceramic bearings – no mechanical seals, reduced internal friction, better rotor cooling & temperature stability
• Strong stainless steel 304 construction
• Easy set-up with basic installations requiring only the included switch between the solar panels & the pump and a float switch in the tank if required.

Optional System Monitor Features

• Dual Power Input – connect both solar panels and mains or generator power in the monitor
• Automatic Solar priority, switching to AC power in low light – widens the potential for cost saving hybrid solar pumping applications
• Float sensor or Pressure switch input – for automated pumping systems

Specifications

• Maximum Flow Rate – 28m3 or 480L/min with no head resistance (see curve graph above for head & flow performance range)
• Maximum Head Pressure – 25 or 35PSI (where flow drops to 0)
• Motor Power – 2.8HP or 2800w
• Motor & Pump Outer Diameter – 4″
• Pump Outlet Size – 2″ BSP
• Maximum Solar Array Voc – 440v
• Recommended Solar Vmp range – 90v – 360v

Included Components

• 2.8HP / 2800w Motor / Controller & SS Multi-stage Pump head
• Solar panels (if ordered – see selections at top of page)
• 10m Solar panel extension lead with MC4 connectors one end
• Weatherproof solar isolator switch
• Wiring connection guide

Read less...

To contact Commodore Australia about Solar Pumps | Hybrid Solar Pumping Systems 28-25 - Max flow 28m3 use Get a quote.