Slurry Pinch Valves | eDart Red Roc

Slurry Pinch Valves | Red Roc

Slurry Pinch Valves | eDart Red Roc

Slurry Pinch Valves | Red Roc

When fully open the 100% full bore design is identical to a rubber lined pipe. This design completely encapsulates the media being transported, and eliminates the risk of the media contaminating the mechanical working parts where in most other types of valves slurry can build up and impair operation of the valve or even cause complete valve failure.

Due to the full bore design, turbulence is greatly reduced, which reduces wear and increases the life of the valve. Scale build stuck to the sleeve wall will break up and dislodge passing through the valve because of the flexing of the rubber sleeve. Red Roc Pinch Valves are bi-directional and feature a drop tight shutoff. They have been designed with a shortened face-to-face dimension, similar to that of a diaphragm valve 

Typical applications for eDart Red Roc Slurry Pinch Valves:

• Mineral Processing: Mine tailings, Slurries, Corrosives, Acids
• Power Generation: Ash handling, Coal, Dust and scrubber slurries
• Oil Sand: Oil Drilling mud
• Chemical Plants
• Mineral Dressing Plants
• Fertilizer manufacturers
• Sewage effluent treatment
• Slurry tailings valve
• Thickener or clarifier
• Cyclone isolation
• Dry hoppers
• Pneumatic Conveying
• Paper pulps
• Cement
• Pump isolation

Available Flanges (Spec, Pressure, Spec ,Pressure)

 

• BS 4504/SANS 1123 1000/3, 10 bar Pressure, DIN PN 10
• BS 4504/SANS 1123 1000/16, 16 bar, DIN PN 16
• BS 4504/SANS 1123 1000/25, 25 bar, DIN PN 25
• BS 10 TABLE E, 13.78 bar ANSI/ASME B16.5 #150 (steel) 17.2 bar
• BS 10 TABLE D, 6.89 bar, ANSI/ASME B16.1 #125 (grey cast iron, fits to B16.5 #150), 1-12”: 13.8 bar 14-24”:10.3 bar <38°C

Material of Construction (Part, Material Options)

• Body Stainless Steel 316 or Phenoline Painted S355JR steel
• Actuator: ECoated endplates and StSt 304 cover or all 316 Stainless Steel.
• Pedestal Stainless Steel 316 or Phenoline Painted S355JR steel
• Sleeve Reinforced Rubber

For more information or a qoute on Red Roc Slurry Pinch Valves including a detailed product brochure please call or email for a direct reply

 

Read more...

To contact Dual Valves Australasia about Slurry Pinch Valves | eDart Red Roc use Get a quote.

When fully open the 100% full bore design is identical to a rubber lined pipe. This design completely encapsulates the media being transported, and eliminates the risk of the media contaminating the mechanical working parts where in most other types of valves slurry can build up and impair operation of the valve or even cause complete valve failure.

Due to the full bore design, turbulence is greatly reduced, which reduces wear and increases the life of the valve. Scale build stuck to the sleeve wall will break up and dislodge passing through the valve because of the flexing of the rubber sleeve. Red Roc Pinch Valves are bi-directional and feature a drop tight shutoff. They have been designed with a shortened face-to-face dimension, similar to that of a diaphragm valve 

Typical applications for eDart Red Roc Slurry Pinch Valves:

• Mineral Processing: Mine tailings, Slurries, Corrosives, Acids
• Power Generation: Ash handling, Coal, Dust and scrubber slurries
• Oil Sand: Oil Drilling mud
• Chemical Plants
• Mineral Dressing Plants
• Fertilizer manufacturers
• Sewage effluent treatment
• Slurry tailings valve
• Thickener or clarifier
• Cyclone isolation
• Dry hoppers
• Pneumatic Conveying
• Paper pulps
• Cement
• Pump isolation

Available Flanges (Spec, Pressure, Spec ,Pressure)

 

• BS 4504/SANS 1123 1000/3, 10 bar Pressure, DIN PN 10
• BS 4504/SANS 1123 1000/16, 16 bar, DIN PN 16
• BS 4504/SANS 1123 1000/25, 25 bar, DIN PN 25
• BS 10 TABLE E, 13.78 bar ANSI/ASME B16.5 #150 (steel) 17.2 bar
• BS 10 TABLE D, 6.89 bar, ANSI/ASME B16.1 #125 (grey cast iron, fits to B16.5 #150), 1-12”: 13.8 bar 14-24”:10.3 bar <38°C

Material of Construction (Part, Material Options)

• Body Stainless Steel 316 or Phenoline Painted S355JR steel
• Actuator: ECoated endplates and StSt 304 cover or all 316 Stainless Steel.
• Pedestal Stainless Steel 316 or Phenoline Painted S355JR steel
• Sleeve Reinforced Rubber

For more information or a qoute on Red Roc Slurry Pinch Valves including a detailed product brochure please call or email for a direct reply

 

Read less...

To contact Dual Valves Australasia about Slurry Pinch Valves | eDart Red Roc use Get a quote.