Sense IoT - Ethernet Gateway 4

Ethernet Gateway 4

Simply provide power and plug the gateway into an open ethernet network port with an internet connection. It will then automatically connect with our online servers, providing the perfect solution for commercial locations where there is an active internet connection. The Ethernet Gateway 4 allows your Sense IoT Wireless Sensors to communicate with the Sense IoT portal system via ethernet transmission. Ethernet Gateways are advanced wireless IoT gateways that enable fast time-to-market solutions. Sense IoT's Ethernet Gateway 4 is specifically designed to respond to the increasing  market need for global technology that accommodates a variety of vertical IoT application segments and remote wireless sensor management solutions.

What's in the box?

• Ethernet Cable
• Ethernet Gateway
• Ethernet Gateway Quick Start Guide
• Power Supply
• RP SMA Antenna

Suggested Application

• Remote Location Monitoring
• Shipping and Transportation
• Agricultural Monitoring
• Vacant Property Management
• Vacation Home Property Management
• Construction Site Monitoring
• Data Center Monitoring

International 3G Cellular Gateway Specifications

• Product Code: SNG2-4-EGW-CCE
• Ethernet Types: MNG2-x-EGW-CCE
• Hardware: 10/100 Ethernet Controller
• IEEE Standard Compliance:802.3 – 2002
• Operation: Full - Half Duplex
• Cross-Over Correction: Automatic MDI/MDI-X
• Protocols Supported: DHCP, DNS, NTP, UDP, TCP, SNMP, Modbus TCP
• Cable Connector: RJ45
• Device Memory: Up to 15,000 sensor messages; varies based on sensor type. (Sensor messages will be stored in the event of Internet outage and transferred when connection is restored.)
• Input Current: 5.0 VDC @ 1A
• LED Lights: Connectivity, Server, Network Status

433 MHz Specification

• Operating Frequency: 433 MHz Operating Frequency
• Certifications: CE Certified. Tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950.
• Device Range: Device range up to 365.7m non-line-of-sight, wireless device range*
• Security: Encrypt-RF® (Diffie-Hellman Key Exchange + AES-128 CBC)

 

Read more...

To contact Sense IoT about Sense IoT Ethernet Gateway 4 use Get a quote.

Simply provide power and plug the gateway into an open ethernet network port with an internet connection. It will then automatically connect with our online servers, providing the perfect solution for commercial locations where there is an active internet connection. The Ethernet Gateway 4 allows your Sense IoT Wireless Sensors to communicate with the Sense IoT portal system via ethernet transmission. Ethernet Gateways are advanced wireless IoT gateways that enable fast time-to-market solutions. Sense IoT's Ethernet Gateway 4 is specifically designed to respond to the increasing  market need for global technology that accommodates a variety of vertical IoT application segments and remote wireless sensor management solutions.

What's in the box?

• Ethernet Cable
• Ethernet Gateway
• Ethernet Gateway Quick Start Guide
• Power Supply
• RP SMA Antenna

Suggested Application

• Remote Location Monitoring
• Shipping and Transportation
• Agricultural Monitoring
• Vacant Property Management
• Vacation Home Property Management
• Construction Site Monitoring
• Data Center Monitoring

International 3G Cellular Gateway Specifications

• Product Code: SNG2-4-EGW-CCE
• Ethernet Types: MNG2-x-EGW-CCE
• Hardware: 10/100 Ethernet Controller
• IEEE Standard Compliance:802.3 – 2002
• Operation: Full - Half Duplex
• Cross-Over Correction: Automatic MDI/MDI-X
• Protocols Supported: DHCP, DNS, NTP, UDP, TCP, SNMP, Modbus TCP
• Cable Connector: RJ45
• Device Memory: Up to 15,000 sensor messages; varies based on sensor type. (Sensor messages will be stored in the event of Internet outage and transferred when connection is restored.)
• Input Current: 5.0 VDC @ 1A
• LED Lights: Connectivity, Server, Network Status

433 MHz Specification

• Operating Frequency: 433 MHz Operating Frequency
• Certifications: CE Certified. Tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950.
• Device Range: Device range up to 365.7m non-line-of-sight, wireless device range*
• Security: Encrypt-RF® (Diffie-Hellman Key Exchange + AES-128 CBC)

 

Read less...

To contact Sense IoT about Sense IoT Ethernet Gateway 4 use Get a quote.