SCM - Spindle Moulder | minimax tw 45c

Spindle Moulder | minimax tw 45c

Features of this product

• Professional and very sturdy, The unit has a cast iron structure. It is closed off by a cast iron “cup” to protect mechanical components inside the machine from sawdust, shavings and dirt. Precise and safe machining with the spindle moulder fence with micrometric adjustment complete with vertical and horizontal pressers.
• Tilting spindle, On request, it is available the 45° tilting spindle, toward the inside of the machine.
• Customisable for any requirement, The 270 mm sliding table on tw 45c, provides a greater support, very useful also for tenoning. Precise cuttings, even for large work pieces, with the support frame (option) with telescopic fence.
• High-tech accessories, As option it is available the spindle moulder hood that uses a system for adjusting the guides with a rack and it is fitted with a mechanical digital readout. Thanks to the system of memories the hood can be removed and repositioned without losing the machining position. The maximum tool diameter during moulding operations is 240 mm.

Specifications of this product

• Max. useful spindle length: 100 mm
• Spindle moulder speed (a 50 Hz): 3500/7000/10.000 giri/min
• Max. tool diameter when profiling: 210 mm
• Max. tool diameter lowered under the table at 90°: 180 mm
• Max. tool diameter when tenoning: 275 mm
• Three-phase motors starting from: 5 (6) / 50 (60) kW/Hz

Read more...

To contact SCM Australia about SCM Spindle Moulder | minimax tw 45c use Get a quote.

Features of this product

• Professional and very sturdy, The unit has a cast iron structure. It is closed off by a cast iron “cup” to protect mechanical components inside the machine from sawdust, shavings and dirt. Precise and safe machining with the spindle moulder fence with micrometric adjustment complete with vertical and horizontal pressers.
• Tilting spindle, On request, it is available the 45° tilting spindle, toward the inside of the machine.
• Customisable for any requirement, The 270 mm sliding table on tw 45c, provides a greater support, very useful also for tenoning. Precise cuttings, even for large work pieces, with the support frame (option) with telescopic fence.
• High-tech accessories, As option it is available the spindle moulder hood that uses a system for adjusting the guides with a rack and it is fitted with a mechanical digital readout. Thanks to the system of memories the hood can be removed and repositioned without losing the machining position. The maximum tool diameter during moulding operations is 240 mm.

Specifications of this product

• Max. useful spindle length: 100 mm
• Spindle moulder speed (a 50 Hz): 3500/7000/10.000 giri/min
• Max. tool diameter when profiling: 210 mm
• Max. tool diameter lowered under the table at 90°: 180 mm
• Max. tool diameter when tenoning: 275 mm
• Three-phase motors starting from: 5 (6) / 50 (60) kW/Hz

Read less...

To contact SCM Australia about SCM Spindle Moulder | minimax tw 45c use Get a quote.