RBA Concealed In-wall Towel Dispenser

RBA Concealed In-wall Towel Dispenser

RBA Concealed In-wall Towel Dispenser 

• Satin finish Stainless Steel
  
• Capacity: 600 C-fold or 800 multifold paper towels
  
• Minimum recessed depth plus thickness of wall finish: 114mm
  
• Unit is loaded from bottom
  

MATERIALS:

Paper Towel Tray — 18-8 S, type-304, heavy-gauge stainless steel with satin finish. Equipped with two self-closing pianohinged panels. Capacity: 600 C-fold or 800 multifold paper towels.

OPERATION:
Paper towel dispenser will dispense C-fold or multifold paper towels without adjustment or the use of adapters. Only the paper towel tray is visible when properly installed. Unit is loaded from bottom by pushing towels up through self-closing panels of paper towel tray.

Designer's Notes: Model B-318 is designed for installation in wall prior to installation of surface-mounted framed or unframed mirror (not furnished as part of Model B-318). Bobrick B-290 Series stainless steel angle-frame mirrors are suggested for installation in combination with Model B-318. For standard installations, it is recommended that the unit be located between two
lavatories. Installation in a non-mirror side wall is recommended where access is needed by physically disabled persons.

INSTALLATION:
Provide framed rough wall opening 12'' (305mm) wide; height should be at least 24-1/4" (615mm), allowing 6" (152mm) minimum recess space below unit for access to towels. Minimum recessed depth required is 4-1/2" (114mm) plus thickness of wall finish. Allow clearance
for construction features that may protrude into rough wall opening from opposite wall. Coordinate
with mechanical engineer to avoid pipes, vents, and conduits. Mount unit in wall opening with shims between framing and mounting tabs at four points indicated by an S, then secure unit to framing with #8 x 1¼'' (4.2 x 32mm ) sheet-metal screws (not furnished).

Read more...

To contact RBA Group about RBA Concealed In-wall Towel Dispenser use Get a quote.

RBA Concealed In-wall Towel Dispenser 

• Satin finish Stainless Steel
  
• Capacity: 600 C-fold or 800 multifold paper towels
  
• Minimum recessed depth plus thickness of wall finish: 114mm
  
• Unit is loaded from bottom
  

MATERIALS:

Paper Towel Tray — 18-8 S, type-304, heavy-gauge stainless steel with satin finish. Equipped with two self-closing pianohinged panels. Capacity: 600 C-fold or 800 multifold paper towels.

OPERATION:
Paper towel dispenser will dispense C-fold or multifold paper towels without adjustment or the use of adapters. Only the paper towel tray is visible when properly installed. Unit is loaded from bottom by pushing towels up through self-closing panels of paper towel tray.

Designer's Notes: Model B-318 is designed for installation in wall prior to installation of surface-mounted framed or unframed mirror (not furnished as part of Model B-318). Bobrick B-290 Series stainless steel angle-frame mirrors are suggested for installation in combination with Model B-318. For standard installations, it is recommended that the unit be located between two
lavatories. Installation in a non-mirror side wall is recommended where access is needed by physically disabled persons.

INSTALLATION:
Provide framed rough wall opening 12'' (305mm) wide; height should be at least 24-1/4" (615mm), allowing 6" (152mm) minimum recess space below unit for access to towels. Minimum recessed depth required is 4-1/2" (114mm) plus thickness of wall finish. Allow clearance
for construction features that may protrude into rough wall opening from opposite wall. Coordinate
with mechanical engineer to avoid pipes, vents, and conduits. Mount unit in wall opening with shims between framing and mounting tabs at four points indicated by an S, then secure unit to framing with #8 x 1¼'' (4.2 x 32mm ) sheet-metal screws (not furnished).

Read less...

To contact RBA Group about RBA Concealed In-wall Towel Dispenser use Get a quote.