PSSS - Cold Cutting Machine | Excalibur

Cold Cutting Machine | Excalibur

Features of this product

• Cuts pipe up to 2” (50mm) thickness
• Bevels high tensile stainless-steel pipe
• Market leader in cutting and bevelling
• Manufactured in the EU, to EU Machinery Directive 2006/42/ EC,
• Cuts and bevels most machinable materials; carbon steel, stainless steel, ductile iron, cast iron and most other alloys without spark or flame.
• The heavy-duty chain tensioning mechanism is encased in a high strength alloy frame provides the required rigidity and strength for cutting the pipe at the highest travel speed possible.
• The frame of the Excalibur has six wheel positions to follow the radius of the pipe and allow tracking accuracy on a 36” pipe of better than 0.3mm
• Equipped with a two-speed drive gearbox providing positive movement of the machine around the pipe in all cutting conditions
• No out-of-round compensation is required as the machine follows the pipe’s outside diameter, producing an even and consistent cut.
• The drive chain can be adjusted to accommodate pipes from 6” to 5 meters in diameter (and beyond).
• Driven by two highly reliable, heavy duty pneumatic air motors; a 2.75KW motor coupled to the heavy-duty transmission rotating the cutting blades up to 71RPM and a 56KW motor connected to the two speed transmission which moves the machine around the pipe.
• Beveling blades in various configurations; 30°/ 37.5° beveling angles and ‘U’ joint and ‘J’ prep included
•  A 10 bar @ 4000l/m Compressor is required for operation.
• Works in the most extreme temperatures

Read more...

To contact Piping Specialty Supply Service about PSSS Cold Cutting Machine | Excalibur use Get a quote.

Features of this product

• Cuts pipe up to 2” (50mm) thickness
• Bevels high tensile stainless-steel pipe
• Market leader in cutting and bevelling
• Manufactured in the EU, to EU Machinery Directive 2006/42/ EC,
• Cuts and bevels most machinable materials; carbon steel, stainless steel, ductile iron, cast iron and most other alloys without spark or flame.
• The heavy-duty chain tensioning mechanism is encased in a high strength alloy frame provides the required rigidity and strength for cutting the pipe at the highest travel speed possible.
• The frame of the Excalibur has six wheel positions to follow the radius of the pipe and allow tracking accuracy on a 36” pipe of better than 0.3mm
• Equipped with a two-speed drive gearbox providing positive movement of the machine around the pipe in all cutting conditions
• No out-of-round compensation is required as the machine follows the pipe’s outside diameter, producing an even and consistent cut.
• The drive chain can be adjusted to accommodate pipes from 6” to 5 meters in diameter (and beyond).
• Driven by two highly reliable, heavy duty pneumatic air motors; a 2.75KW motor coupled to the heavy-duty transmission rotating the cutting blades up to 71RPM and a 56KW motor connected to the two speed transmission which moves the machine around the pipe.
• Beveling blades in various configurations; 30°/ 37.5° beveling angles and ‘U’ joint and ‘J’ prep included
•  A 10 bar @ 4000l/m Compressor is required for operation.
• Works in the most extreme temperatures

Read less...

To contact Piping Specialty Supply Service about PSSS Cold Cutting Machine | Excalibur use Get a quote.