Parkland - Mower | 3860mm

Mower | 3860mm

Features of this product

• Fine finish cutting.
• Can be used as a twin, triple, or four deck mower.
• Independent decks give full coverage of undulating areas such as fairways.
• A full 3.7 metre cut.
• Specially developed blade rotation settings ensure blades enter trampled grass
• Gives a clean, even cut.
• Unique deck frame mountings allow the decks to paddle up and down independently
• Follows ground contours.
• Outer decks can fold to allow mowing down the centre of ridges or drains.
• Outer decks can be folded and locked for transport.
• All 12 wheels are adjustable to give accuracy when setting deck heights.
• Fully covered front drive section for safety and lower maintenance.
• Trailing Format allows use by a wide range of tractors

Specifications of this product

We have various models and specifications in our range. These details are for the Mower | 3860mm. Get in touch to let us know your requirements so we can quote you on a product that best suits your needs.

• Overall width: 3860mm working 2300mm folded
• Width of cut: 3.7 metres
• Number of rotors: 4
• Number of blades per rotor: 2 with 360 degree rotation
• Blade speed: 1500 rpm at 540 pto rpm
• Power requirement: 40 to 70 hp
• Drive protection: vee belt
• Hydraulics: single acting 200mm ram
• Height adjustment: 0 to 75mm using independent wheel adjustments
• Front tyres: 500 x 8 8ply (optional 18 x 850 x 8 4 ply)
• Rear tyres: 350 x 6 4ply (optional 15 x 500 x 6 4ply)
• Folding: standard hand winch (optional hydraulic)
• Belts: b section - 2 per rotor
• Pulleys: steel taperlock b section
• Gearboxes: 40hp - 1.93:1 ratio
• Pto heads: 1 3/8" 6 spline on sealed bearings
• Pto shafts: input - 6 series gearbox - 4 series
• Drawbar: 25.4mm ball swivel and adjustable support jack

Read more...

To contact Wilson Machinery about Parkland Mower | 3860mm use Get a quote.

Features of this product

• Fine finish cutting.
• Can be used as a twin, triple, or four deck mower.
• Independent decks give full coverage of undulating areas such as fairways.
• A full 3.7 metre cut.
• Specially developed blade rotation settings ensure blades enter trampled grass
• Gives a clean, even cut.
• Unique deck frame mountings allow the decks to paddle up and down independently
• Follows ground contours.
• Outer decks can fold to allow mowing down the centre of ridges or drains.
• Outer decks can be folded and locked for transport.
• All 12 wheels are adjustable to give accuracy when setting deck heights.
• Fully covered front drive section for safety and lower maintenance.
• Trailing Format allows use by a wide range of tractors

Specifications of this product

We have various models and specifications in our range. These details are for the Mower | 3860mm. Get in touch to let us know your requirements so we can quote you on a product that best suits your needs.

• Overall width: 3860mm working 2300mm folded
• Width of cut: 3.7 metres
• Number of rotors: 4
• Number of blades per rotor: 2 with 360 degree rotation
• Blade speed: 1500 rpm at 540 pto rpm
• Power requirement: 40 to 70 hp
• Drive protection: vee belt
• Hydraulics: single acting 200mm ram
• Height adjustment: 0 to 75mm using independent wheel adjustments
• Front tyres: 500 x 8 8ply (optional 18 x 850 x 8 4 ply)
• Rear tyres: 350 x 6 4ply (optional 15 x 500 x 6 4ply)
• Folding: standard hand winch (optional hydraulic)
• Belts: b section - 2 per rotor
• Pulleys: steel taperlock b section
• Gearboxes: 40hp - 1.93:1 ratio
• Pto heads: 1 3/8" 6 spline on sealed bearings
• Pto shafts: input - 6 series gearbox - 4 series
• Drawbar: 25.4mm ball swivel and adjustable support jack

Read less...

To contact Wilson Machinery about Parkland Mower | 3860mm use Get a quote.