Palas - Professional Aerosol Generator | RBG 1000 GD

Professional Aerosol Generator | RBG 1000 GD

Low-concentration solid particle aerosols produced from powders are required for many applications in research, development, and quality assurance and for the calibration of particle measurement devices. For more than 25 years, the RBG system has been used worldwide with great success for the reliable dispersion of non-cohesive powders such as mineral dust, active pharmaceutical ingredients, pollen, etc. in the size range of < 100 µm and with a fine fraction of < 100 nm. Monolithic solid materials such as blackboard chalk are finely dispersed with the highest dosing constancy. The special advantage of this dosing and dispersion system is that in the case of the RBG 1000, mass flows ranging from approx. 10 mg/h up to approx. 430 g/h are dispersed with the highest level of dosing constancy thanks to the quick, easy exchange of the solid material reservoir. The fill level of the feedstock reservoir is 70 mm.

Key Features

• For very low feed rates starting at 1 mm/h, pressure-resistant at positive pressure values of up to 3 bar, optional low-pressure operation from 300 mbar (absolute pressure)
• Highest short-term and long-term dosing constancy
• Disperses virtually all non-cohesive dust
• Easy exchange of different solid material reservoirs and dispersing covers
• Easy determination and adjustment of the mass flow
• Pulse mode
• Device easy to clean
• Quick and easy to operate
• Reliable operation
• Little maintenance required
• Reduces your operating expenses

Typical Applications

• Filter industry:
  • Determination of fractional separation efficiency
  • Determination of total separation efficiency
  • Long-term dusting
  • Filter media and ready-made filters
  • Dust removal filters
  • Vacuum cleaners and vacuum cleaner filters
  • Car interior filters
  • Engine air filters
• Calibration of particle measurement devices
• Flow visualization
• Inhalation tests
• Tracer particles for LDA, PIV, etc.
• Coating of surfaces

Read more...

To contact Flowtech Scientific about Palas Professional Aerosol Generator | RBG 1000 GD use Get a quote.

Low-concentration solid particle aerosols produced from powders are required for many applications in research, development, and quality assurance and for the calibration of particle measurement devices. For more than 25 years, the RBG system has been used worldwide with great success for the reliable dispersion of non-cohesive powders such as mineral dust, active pharmaceutical ingredients, pollen, etc. in the size range of < 100 µm and with a fine fraction of < 100 nm. Monolithic solid materials such as blackboard chalk are finely dispersed with the highest dosing constancy. The special advantage of this dosing and dispersion system is that in the case of the RBG 1000, mass flows ranging from approx. 10 mg/h up to approx. 430 g/h are dispersed with the highest level of dosing constancy thanks to the quick, easy exchange of the solid material reservoir. The fill level of the feedstock reservoir is 70 mm.

Key Features

• For very low feed rates starting at 1 mm/h, pressure-resistant at positive pressure values of up to 3 bar, optional low-pressure operation from 300 mbar (absolute pressure)
• Highest short-term and long-term dosing constancy
• Disperses virtually all non-cohesive dust
• Easy exchange of different solid material reservoirs and dispersing covers
• Easy determination and adjustment of the mass flow
• Pulse mode
• Device easy to clean
• Quick and easy to operate
• Reliable operation
• Little maintenance required
• Reduces your operating expenses

Typical Applications

• Filter industry:
  • Determination of fractional separation efficiency
  • Determination of total separation efficiency
  • Long-term dusting
  • Filter media and ready-made filters
  • Dust removal filters
  • Vacuum cleaners and vacuum cleaner filters
  • Car interior filters
  • Engine air filters
• Calibration of particle measurement devices
• Flow visualization
• Inhalation tests
• Tracer particles for LDA, PIV, etc.
• Coating of surfaces

Read less...

To contact Flowtech Scientific about Palas Professional Aerosol Generator | RBG 1000 GD use Get a quote.