OEM - 3 Three Inch Bore Pumps | Submersible Pumps Price Guide: $850

3 Three Inch Bore Pumps | Submersible Pumps

 3 Three Inch Bore Pump

Assembly includes 3 submersible pump, motor & starter box only.

• 0 liters per min / 0.00 liters per second @ 71m head
• 10 liters per min / 0.16 liters per second @ 66m head
• 20 liters per min / 0.33 liters per second @ 58m head
• 30 liters per min / 0.50 liters per second @ 48m head
• 35 liters per min / 0.58 liters per second @ 41m head
• 40 liters per min / 0.66 liters per second @ 34m head
• 45 liters per min / 0.75 liters per second @ 26m head
• 50 liters per min / 0.83 liters per second @ 18m head

This model has a 0.55kw/0.75hp 3-wire (4-core) single 1 phase motor.

As with the starter box, the Automatic Control Box contains the circuit breaker and capacitor.  However, it has the added feature of ‘water level monitoring’ probes.  These probes are installed down the bore with the pump and are wired into the control box. If there is not enough water, the system will shut down until the water level in the bore recovers and will allow the system to restart when the water level in the bore recovers. Handy if you don’t know the flow of the bore or have a low yielding bore.

There are other accessories that you will need to install your bore pump which include bore cap, drop cable, support cable, riser pipe, pressure gauge, etc. These are listed below.
Please be sure that your pump and accessory selection is correct before you purchase as the onus is on you. This is why I have included suggestions below with links, to ensure you select the correct size accessories for this model pump.

Options to purchase with your kit to suit this pump:

Electrical Cable

• The info below is a guide only, you must check with your electrician on cable size.
  3-wire/4 core:

  • 1.5mm sq cable up to 55m
  • 2.5mm sq cable up to 90m
  • 4mm sq cable up to 140m
• Always check with your electrician. He will do volt drop calculations to meet site requirements to comply with AS.

Stainless Steel Support Cable

• Available in 3mm cable or 4mm cable

Stainless Steel Support Cable Grips/Clamps

• Available in 3mm or 4mm to suit S/S Cable

Pressure Gauges

• Liquid Filled 63mm – Available in 0-800kPa, 0-1000kPa, 0-1600kPa and 0-2400kPa

Installation Roller

• The installation roller fits on the top of the bore casing making it easy to lift and lower the bore pump down the borehole.

Pumps used down old windmill bores

 

View the 3 Three Inch Bore Pump at Strongman Pumps

Read more...

To contact Strongman Pumps about OEM 3 Three Inch Bore Pumps | Submersible Pumps use Get a quote.

 3 Three Inch Bore Pump

Assembly includes 3 submersible pump, motor & starter box only.

• 0 liters per min / 0.00 liters per second @ 71m head
• 10 liters per min / 0.16 liters per second @ 66m head
• 20 liters per min / 0.33 liters per second @ 58m head
• 30 liters per min / 0.50 liters per second @ 48m head
• 35 liters per min / 0.58 liters per second @ 41m head
• 40 liters per min / 0.66 liters per second @ 34m head
• 45 liters per min / 0.75 liters per second @ 26m head
• 50 liters per min / 0.83 liters per second @ 18m head

This model has a 0.55kw/0.75hp 3-wire (4-core) single 1 phase motor.

As with the starter box, the Automatic Control Box contains the circuit breaker and capacitor.  However, it has the added feature of ‘water level monitoring’ probes.  These probes are installed down the bore with the pump and are wired into the control box. If there is not enough water, the system will shut down until the water level in the bore recovers and will allow the system to restart when the water level in the bore recovers. Handy if you don’t know the flow of the bore or have a low yielding bore.

There are other accessories that you will need to install your bore pump which include bore cap, drop cable, support cable, riser pipe, pressure gauge, etc. These are listed below.
Please be sure that your pump and accessory selection is correct before you purchase as the onus is on you. This is why I have included suggestions below with links, to ensure you select the correct size accessories for this model pump.

Options to purchase with your kit to suit this pump:

Electrical Cable

• The info below is a guide only, you must check with your electrician on cable size.
  3-wire/4 core:

  • 1.5mm sq cable up to 55m
  • 2.5mm sq cable up to 90m
  • 4mm sq cable up to 140m
• Always check with your electrician. He will do volt drop calculations to meet site requirements to comply with AS.

Stainless Steel Support Cable

• Available in 3mm cable or 4mm cable

Stainless Steel Support Cable Grips/Clamps

• Available in 3mm or 4mm to suit S/S Cable

Pressure Gauges

• Liquid Filled 63mm – Available in 0-800kPa, 0-1000kPa, 0-1600kPa and 0-2400kPa

Installation Roller

• The installation roller fits on the top of the bore casing making it easy to lift and lower the bore pump down the borehole.

Pumps used down old windmill bores

 

View the 3 Three Inch Bore Pump at Strongman Pumps

Read less...

To contact Strongman Pumps about OEM 3 Three Inch Bore Pumps | Submersible Pumps use Get a quote.