Franklin Electric - Bore Pump | FPS2A-78 Price Guide: $6,980 Get latest price

Read more...

To contact Strongman Pumps about Franklin Electric Bore Pump | FPS2A-78 use Get a quote.

Franklin Electric Bore Pumps | 3 Phase Motor - FPS2A-78

• Assembly includes pump and motor only.
• 4400 Tri-Seal 4-Inch Bore Pump and Motor Kit.
• 2 m³/h flow ratings
• 30 liters per min / 0.5 liters per second @ 402m head
• The 3 phase will require a 3 phase contactor/starter which will need to be ordered separately.

There are other accessories that you will need to install your bore pump which include bore cap, drop cable, support cable, riser pipe, pressure gauge, etc. These are listed below
Please be sure that your pump and accessory selection is correct before you purchase as the onus is on you. This is why I have included suggestions below with links, to ensure you select the correct size accessories for this model pump.

Options to purchase with your kit to suit this pump:

Bore Cap

• This model has a 1 1/4 (32mm) discharge thread, so if you are using 32mm pipe diameter then a 1.25″ Bore Cap would be recommended.

Shroud Adapter

• A shroud adapter is only needed if you are installing a 4″ pump down 6″ or larger casing.
  If using 32mm pipe diameter then a 32 x 100mm (1 1/4″ riser) PVC Shroud Adapter would be recommended.

Electrical Cable

• The info below is a guide only, you must check with your electrician on cable size.
• 3 Phase Cable (3-wire/4 core) – 1.5mm sq cable up to 120m
• Always check with your electrician. He will do volt drop calculations to meet site requirements to comply with AS.

Stainless Steel Support Cable

• Available in 3mm cable or 4mm cable

Stainless Steel Support Cable Grips/Clamps

• Available in 3mm or 4mm to suit S/S Cable

Pressure Gauges

• Liquid Filled 63mm – Available in 0-800 kPa, 0-1000 kPa, 0-1600 kPa and 0-2500 kPa

Flexible Riser Pipe

• Series 100 is for depths up to 100. The sizes are 32 mm and 50 mm internal diameter.
• Series 200 is for depths up to 250m. The sizes range from 40mm to 200mm internal diameter.
• As well as the Couplings, ties, joiners and installation roller.

3 Phase Contactor

• The correct size contactor for this model is a 7.5kw/5.5hp contactor

3 Three Phase Motor Protection

• If you purchase a 3 Phase Kit, then you will need a Submonitor as your motor protection device.

3 Year Warranty

View the FPS2A-78 Franklin 3 Phase Bore Pump at Strongman Pumps

Read less...

To contact Strongman Pumps about Franklin Electric Bore Pump | FPS2A-78 use Get a quote.