Newtronic - Walk-In Stability Humidity Chamber Get latest price

Walk-In Stability Humidity Chamber

In Stock

These are medium to large-sized chambers that are custom-built to ensure that they not only fit optimally in your lab's stability area but also address your large-scale stability testing requirements.

Walk-In Chambers have now become a de-facto requirement for companies planning multiple ANDA filings & planning to launching various products simultaneously.

NEWTRONIC Walk-Ins ensure a smooth air-flow pattern to improve the temperature & humidity distribution across the chamber. This has also led to huge load reduction on the heating, cooling & humidifier systems. This & many other innovations in the construction & design aspects have ensured dramatic reduction in power consumption of our Walk-Ins.

NEWTRONIC has also been regularly exporting the Walk-In Chambers to all the major markets of the world. We ensure our products meet all kinds of country-specific requirements such as voltage specifications, regulatory needs, container shipping, etc

 

Features

• Ethernet Communications
  • High-speed data transfer
  • Significantly faster than serial(RS-485) communication
  • Global standard for communication protocol
  • No need for a separate PC interface
  • Data Operations from any PC over the LAN
• Standby Humidity and Cooling System
  • Completely ready-to-use systems
  • Automatic switch-over upon failure of primary systems to achieve conditions
  • Switch-over also upon detection of HP/LP & Internal fault
  • Scheduled & manual change-overs
  • Recording of all change-overs in the software
• PLC-Based Control System
  • Complete Operations driven through PLC
  • No Data Loss: Data Storage of upto 1000 readings on the PLC itself
  • At an interval of 30 mins, data upto 20 days is stored on the PLC itself
  • Facility to send emails directly from the PLC
• Touch Screen Display
  • All operations through a single 4" Color touch screen display
  • PLC IP Address setting
  • Component Working Hours
  • Standby system change over
  • Password protection for set values and calibration mode
• E-Mail Alert
  • When an alarm is triggered, an e-mail is sent to the registered PC or mobile address
  • *connection to a mail server is required to use e-mail alert.
• Complete Range of Alarms
  • Temperature & Humidity Deviations
  • Door Opening
  • Water Supply Failure
  • Component Failure
  • Mains Failure
• Documentation and Training
  • IQ, OQ, PQ
  • Calibration certificates
  • Operations & maintenance manuals
  • GA & Electrical drawings
  • Material test certificates
  • Training to end-users
• Safety
  • Temperature Overshoot/Undershoot
  • Humidity Overshoot
  • Low water-level
  • Delay Timer to safeguard the Compressor
  • MCB to cut-off over-current supply
  • Standby Controlling Sensor upon failure of Primary
  • In Walk-in chambers door can be open from inside
  • Emergency Bell switch inside the Chamber
• ICDAS Software
  • 21 CFR Part 11 Ready
  • Single software suitable for up to 20 equipment
  • Automatic daily data back-up
  • Alarm logs. Alarm acknowledgement with e-signatures
  • Audit trails
  • MKT Calculations
  • Graphical viewing & data trending
  • Data export in pdf format
• Touch Screen Door Access System
  • Password based access control
  • Restricts access to unauthorized persons
• Alarm Transmission
  • Mobile alert system
  • Time of alarm transmission
  • Name of equipment
  • Transmitted message(Equipment name, alarm time,type of alarm & limits)

 

Specifications

Temperature Range	20°C to 60°C
Temperature Accuracy	± 0.5°C
Temperature Uniformity	± 1°C
Humidity Range	40% RH to 95% RH
Humidity Accuracy	± 2% RH
Humidity Uniformity	± 3% RH

 

Standard Equipment

Double walled with 80mm PUF insulated modular panels with easy on-site assembly	System is made up of split type condenser unit in well-ventilated area to avoid throw of hot air in the room
SS 304 Interior & Exterior either SS 304 or Powder Coated G.I.	Stand by humidity system
Stainless Steel Trays	Complete Operations driven through PLC with data logging capacity of upto 1000 readings & email facility
Observation window - 300 x 300 mm	High speed Ethernet based communication
Illuminated working area	All operations through a single 4" Color Touch Screen
U-shaped SS tubular heaters	High-quality German Make temperature humidity sensor with 4-20mA output
Flooring of Linoleum carpet	Safety devices: Low & High temperature cut-off settable thermostats & high humidity cut-off device
Forced air circulation for uniform temperature	Audio/Visual alarms for deviations
Non Condensing steam injection type humidity system with standby heater & auto switch overs	Complete with IQ, OQ, PQ & Operations & Maintenance Manual
CFC free cooling system consisting of hermetically sealed compressor coupled with evaporation coil & condenser

Power supply: 230/415 volts 50 Hz main supply. Also available with 60 Hz Cycle.

 

Optional Accessories

ICDAS - A Single Software installation for all Newtronic make equipments	Door Access system (Numeric or Biometertic)
8pt. Temperature & Humidity Scanners	Mobile Alert system
Stand by Cooling System with auto switch overs	Remote alarm system suitable for 4 nos. Newtronic make equipment

 

Read more...

To contact Biotec Solutions about Newtronic Walk-In Stability Humidity Chamber use Get a quote.

These are medium to large-sized chambers that are custom-built to ensure that they not only fit optimally in your lab's stability area but also address your large-scale stability testing requirements.

Walk-In Chambers have now become a de-facto requirement for companies planning multiple ANDA filings & planning to launching various products simultaneously.

NEWTRONIC Walk-Ins ensure a smooth air-flow pattern to improve the temperature & humidity distribution across the chamber. This has also led to huge load reduction on the heating, cooling & humidifier systems. This & many other innovations in the construction & design aspects have ensured dramatic reduction in power consumption of our Walk-Ins.

NEWTRONIC has also been regularly exporting the Walk-In Chambers to all the major markets of the world. We ensure our products meet all kinds of country-specific requirements such as voltage specifications, regulatory needs, container shipping, etc

 

Features

• Ethernet Communications
  • High-speed data transfer
  • Significantly faster than serial(RS-485) communication
  • Global standard for communication protocol
  • No need for a separate PC interface
  • Data Operations from any PC over the LAN
• Standby Humidity and Cooling System
  • Completely ready-to-use systems
  • Automatic switch-over upon failure of primary systems to achieve conditions
  • Switch-over also upon detection of HP/LP & Internal fault
  • Scheduled & manual change-overs
  • Recording of all change-overs in the software
• PLC-Based Control System
  • Complete Operations driven through PLC
  • No Data Loss: Data Storage of upto 1000 readings on the PLC itself
  • At an interval of 30 mins, data upto 20 days is stored on the PLC itself
  • Facility to send emails directly from the PLC
• Touch Screen Display
  • All operations through a single 4" Color touch screen display
  • PLC IP Address setting
  • Component Working Hours
  • Standby system change over
  • Password protection for set values and calibration mode
• E-Mail Alert
  • When an alarm is triggered, an e-mail is sent to the registered PC or mobile address
  • *connection to a mail server is required to use e-mail alert.
• Complete Range of Alarms
  • Temperature & Humidity Deviations
  • Door Opening
  • Water Supply Failure
  • Component Failure
  • Mains Failure
• Documentation and Training
  • IQ, OQ, PQ
  • Calibration certificates
  • Operations & maintenance manuals
  • GA & Electrical drawings
  • Material test certificates
  • Training to end-users
• Safety
  • Temperature Overshoot/Undershoot
  • Humidity Overshoot
  • Low water-level
  • Delay Timer to safeguard the Compressor
  • MCB to cut-off over-current supply
  • Standby Controlling Sensor upon failure of Primary
  • In Walk-in chambers door can be open from inside
  • Emergency Bell switch inside the Chamber
• ICDAS Software
  • 21 CFR Part 11 Ready
  • Single software suitable for up to 20 equipment
  • Automatic daily data back-up
  • Alarm logs. Alarm acknowledgement with e-signatures
  • Audit trails
  • MKT Calculations
  • Graphical viewing & data trending
  • Data export in pdf format
• Touch Screen Door Access System
  • Password based access control
  • Restricts access to unauthorized persons
• Alarm Transmission
  • Mobile alert system
  • Time of alarm transmission
  • Name of equipment
  • Transmitted message(Equipment name, alarm time,type of alarm & limits)

 

Specifications

Temperature Range	20°C to 60°C
Temperature Accuracy	± 0.5°C
Temperature Uniformity	± 1°C
Humidity Range	40% RH to 95% RH
Humidity Accuracy	± 2% RH
Humidity Uniformity	± 3% RH

 

Standard Equipment

Double walled with 80mm PUF insulated modular panels with easy on-site assembly	System is made up of split type condenser unit in well-ventilated area to avoid throw of hot air in the room
SS 304 Interior & Exterior either SS 304 or Powder Coated G.I.	Stand by humidity system
Stainless Steel Trays	Complete Operations driven through PLC with data logging capacity of upto 1000 readings & email facility
Observation window - 300 x 300 mm	High speed Ethernet based communication
Illuminated working area	All operations through a single 4" Color Touch Screen
U-shaped SS tubular heaters	High-quality German Make temperature humidity sensor with 4-20mA output
Flooring of Linoleum carpet	Safety devices: Low & High temperature cut-off settable thermostats & high humidity cut-off device
Forced air circulation for uniform temperature	Audio/Visual alarms for deviations
Non Condensing steam injection type humidity system with standby heater & auto switch overs	Complete with IQ, OQ, PQ & Operations & Maintenance Manual
CFC free cooling system consisting of hermetically sealed compressor coupled with evaporation coil & condenser

Power supply: 230/415 volts 50 Hz main supply. Also available with 60 Hz Cycle.

 

Optional Accessories

ICDAS - A Single Software installation for all Newtronic make equipments	Door Access system (Numeric or Biometertic)
8pt. Temperature & Humidity Scanners	Mobile Alert system
Stand by Cooling System with auto switch overs	Remote alarm system suitable for 4 nos. Newtronic make equipment

 

Read less...

To contact Biotec Solutions about Newtronic Walk-In Stability Humidity Chamber use Get a quote.

Brochure(0.15MB)