Metalmaster - Geared Head Mill Drill | HM-46B Price Guide: $3,581 Get latest price

Geared Head Mill Drill | HM-46B

25 Recent Views In Stock

This feature allows the head to be positioned in a variety of positions, allowing a whole range of milling, slotting, grooving, drilling and boring operations to be carried out.

The usual handle-driven down feed is available for precision drilling and there is a fine manual down-feed control for precise vertical milling.

The motor is controlled by a separate forward and reverse on/off button switches.

There is a heavy duty steel stand available as an extra, strongly recommended bearing in mind the weight of the machine.

Also available is a optional power feed attachment which fits to the left hand end of the table and provides a smooth, variable speed longitudinal drive.

Key Features:

• 3-Axis digital readout counter fitted with 2-Axis X & Y scales only
• Gear driven head 6 speeds
• Dovetail vertical Z-axis
• Mill head tilts to ±90º from vertical with digital display
• Large 730 x 210mm ground work table with T-slots
• Adjustable leadscrew nuts eliminating backlash on both axis
• Fine feed hand wheel operating quill feed
• Forward and reverse on/off button switches
• Digital tilting head gauge
• 3MT spindle with 75mm diameter quill
• Adjustable table and drill length stops
• Rack and pinion wind-up head
• Rear slide-way cover and slide clamps on all axis
• Spindle lock for quill
• Table lock on both axis
• Metric dial graduations @ 0.05mm for X & Y axis

Read more...

To contact General Tools Adelaide about Metalmaster Geared Head Mill Drill | HM-46B use Get a quote.

This feature allows the head to be positioned in a variety of positions, allowing a whole range of milling, slotting, grooving, drilling and boring operations to be carried out.

The usual handle-driven down feed is available for precision drilling and there is a fine manual down-feed control for precise vertical milling.

The motor is controlled by a separate forward and reverse on/off button switches.

There is a heavy duty steel stand available as an extra, strongly recommended bearing in mind the weight of the machine.

Also available is a optional power feed attachment which fits to the left hand end of the table and provides a smooth, variable speed longitudinal drive.

Key Features:

• 3-Axis digital readout counter fitted with 2-Axis X & Y scales only
• Gear driven head 6 speeds
• Dovetail vertical Z-axis
• Mill head tilts to ±90º from vertical with digital display
• Large 730 x 210mm ground work table with T-slots
• Adjustable leadscrew nuts eliminating backlash on both axis
• Fine feed hand wheel operating quill feed
• Forward and reverse on/off button switches
• Digital tilting head gauge
• 3MT spindle with 75mm diameter quill
• Adjustable table and drill length stops
• Rack and pinion wind-up head
• Rear slide-way cover and slide clamps on all axis
• Spindle lock for quill
• Table lock on both axis
• Metric dial graduations @ 0.05mm for X & Y axis

Read less...

To contact General Tools Adelaide about Metalmaster Geared Head Mill Drill | HM-46B use Get a quote.