Maskell FRP Ducting

Maskell - FRP Ducting

FRP Ducting

Maskell have 30 years experience in the design and manufacture of fibreglass ducting systems and associated equipment.

11 Recent Views In Stock

Recent significant projects include the following. Supply of all GRP ducting for the previous two upgrades of the Mangere WWTP odour control system was completed by Maskell. Ducting in the range DN300 - DN2500 was supplied for the sedimentation tanks, biofilters, fixed growth reactors and screening buildings. In 1998, Maskell supplied GRP ducting for the recently commissioned Moa Point WWTP in Wellington, designed and built by Anglian Water International. Ducting for foul air systems in the range DN300 – DN1800 was supplied. From 2001 to 2003 Maskell supplied buried process air pipework for the Project Manukau consortium, Manukau Wastewater Services, who have the Mangere WWTP upgrade project. Ductwork and piping for the $360M project, in the DN450 – DN1500 range, was installed for process air piping. Further supporting information regarding Maskell capability and projects is available upon request.

FRP Ducting Key Features:

Installation of lightweight duct in 10-20m lengths offers lower handling and carnage costs.
Smooth internal surface and reduced long term fouling offers lower pumping costs and higher long term flow rates (reduce duct diameters). We suggest review of the blower requirements for smooth bore duct with reduced lifetime fouling.
Reduced whole of life cost on the duct due to savings in maintenance and pumping costs.
Use of butt-strap site joints means no leaks and a 100% leak test of the duct system is practical. However client may request flexible couplings which are also offered, as necessary
Proven longevity of fibreglass duct including use for acids, alkalis and waste streams.
Installation with sand or aggregate bedding to suit locally available material.

To contact Maskell Australia about Maskell FRP Ducting use Get a quote.

FRP Ducting Key Features:

Installation of lightweight duct in 10-20m lengths offers lower handling and carnage costs.
Smooth internal surface and reduced long term fouling offers lower pumping costs and higher long term flow rates (reduce duct diameters). We suggest review of the blower requirements for smooth bore duct with reduced lifetime fouling.
Reduced whole of life cost on the duct due to savings in maintenance and pumping costs.
Use of butt-strap site joints means no leaks and a 100% leak test of the duct system is practical. However client may request flexible couplings which are also offered, as necessary
Proven longevity of fibreglass duct including use for acids, alkalis and waste streams.
Installation with sand or aggregate bedding to suit locally available material.

Read less...

To contact Maskell Australia about Maskell FRP Ducting use Get a quote.