KROHNE - Temperature Sensor | Optitemp TRA-C61

Temperature Sensor | Optitemp TRA-C61

Optitemp TRA-C61

• Hygienic G½ thread with VARIVENT^®, DIN 11851, SMS 1145 and other hygienic adapters
• Built-in transmitter and stainless steel sheath (FDA, EC1935/2004 conform, optional IP69)
• -50…+200°C / -58…+392°F

The OPTITEMP TRA-C61 is a compact resistance sensor (RTD) with optional integrated transmitter for hygienic use in limited space. The temperature sensor is particularly designed for food & beverage applications. This includes the temperature measurement of beverages, dairy products or pasty food. The sensor is therefore made of stainless steel (1.4404 / 316L) with an industry-specific surface finish of the thermowell of Ra ≤0.8 μm. It complies with FDA and EC1935/2004 regulations. Its G¹⁄₂ thread for hygienic adapters leaves freedom of choice for the process connections. The compact RTD sensor is available with VARIVENT^®, dairy screw (DIN 11851), SMS 1145 as well as different weld-in sleeves.

The OPTITEMP TRA-C61 can be used for temperature measurement of gases, liquids and vapours up to +200°C / +390°F. The compact temperature sensor features high reliability and excellent measurement stability. Its reduced sensor tip guarantees quick response time and high measurement accuracy, even with short installation lengths. The hygienic temperature sensor is resistant to cleaning agents used in CIP and SIP procedures. It is also available in a version for high-pressure jet cleaning with hot water (IP69).

Product Highlights

• Hygienic resistance sensor with optional integrated analogue output (4…20 mA)
• Special sensor design with reduced tip for quick response time
• High accuracy with short installation lengths (20 mm / 0.78 in), even in small pipelines
• Modular G¹⁄₂ adapter system with a wide range of hygienic connections
• Optional IP69 rated version
• Vibration resistant according to IEC 60721-4-4

Typical Applications

Food and beverage industry

• Temperature measurement of beverages, dairy products or pasty food
• Temperature control in breweries (mash tun, lauter tun etc.)
• Temperature control in the sugar dissolving tank
• Temperature control before separator
• Pasteurisation control
• Control of heat exchanger
• CIP temperature control

Technical Data

Measurement principles	Resistance (RTD)
Measured media	Gases, Liquids, Solids
Measuring point	Pipe, Tank
Measuring insert type	Non-replaceable RTD
Measuring insert replaceable	No
RTD element type	1 x Pt100
RTD configuration	4-wire
Temperature sensor connection type option	Built-in transmitter
Sheath diameters	Ø6/3 mm / 0.24/0.12"
Process temperature	-50…+200°C / -58…+392°F

 

Approvals / Standards

Certificates/Approvals Hygienic	EC 1935/2004, EHEDG, FDA
Ingress protection	IP66/67, IP69

 

Communication

Analogue outputs

4…20 mA

 

Process Connection

Thread connections	G½ for hygienic adapters
Hygienic connections	Varivent®: N Conical nozzle (DIN 11851): DN25, DN40, DN50 Conical nozzle (DIN 11864-1A): DN40, DN50 SMS (1145): 51 mm Straight weld-in sleeve Spherical weld-in sleeve Weld-in sleeve with shoulder Collared weld-in sleeve

Read more...

To contact KROHNE Australia about KROHNE Temperature Sensor | Optitemp TRA-C61 use Get a quote.

Optitemp TRA-C61

• Hygienic G½ thread with VARIVENT^®, DIN 11851, SMS 1145 and other hygienic adapters
• Built-in transmitter and stainless steel sheath (FDA, EC1935/2004 conform, optional IP69)
• -50…+200°C / -58…+392°F

The OPTITEMP TRA-C61 is a compact resistance sensor (RTD) with optional integrated transmitter for hygienic use in limited space. The temperature sensor is particularly designed for food & beverage applications. This includes the temperature measurement of beverages, dairy products or pasty food. The sensor is therefore made of stainless steel (1.4404 / 316L) with an industry-specific surface finish of the thermowell of Ra ≤0.8 μm. It complies with FDA and EC1935/2004 regulations. Its G¹⁄₂ thread for hygienic adapters leaves freedom of choice for the process connections. The compact RTD sensor is available with VARIVENT^®, dairy screw (DIN 11851), SMS 1145 as well as different weld-in sleeves.

The OPTITEMP TRA-C61 can be used for temperature measurement of gases, liquids and vapours up to +200°C / +390°F. The compact temperature sensor features high reliability and excellent measurement stability. Its reduced sensor tip guarantees quick response time and high measurement accuracy, even with short installation lengths. The hygienic temperature sensor is resistant to cleaning agents used in CIP and SIP procedures. It is also available in a version for high-pressure jet cleaning with hot water (IP69).

Product Highlights

• Hygienic resistance sensor with optional integrated analogue output (4…20 mA)
• Special sensor design with reduced tip for quick response time
• High accuracy with short installation lengths (20 mm / 0.78 in), even in small pipelines
• Modular G¹⁄₂ adapter system with a wide range of hygienic connections
• Optional IP69 rated version
• Vibration resistant according to IEC 60721-4-4

Typical Applications

Food and beverage industry

• Temperature measurement of beverages, dairy products or pasty food
• Temperature control in breweries (mash tun, lauter tun etc.)
• Temperature control in the sugar dissolving tank
• Temperature control before separator
• Pasteurisation control
• Control of heat exchanger
• CIP temperature control

Technical Data

Measurement principles	Resistance (RTD)
Measured media	Gases, Liquids, Solids
Measuring point	Pipe, Tank
Measuring insert type	Non-replaceable RTD
Measuring insert replaceable	No
RTD element type	1 x Pt100
RTD configuration	4-wire
Temperature sensor connection type option	Built-in transmitter
Sheath diameters	Ø6/3 mm / 0.24/0.12"
Process temperature	-50…+200°C / -58…+392°F

 

Approvals / Standards

Certificates/Approvals Hygienic	EC 1935/2004, EHEDG, FDA
Ingress protection	IP66/67, IP69

 

Communication

Analogue outputs

4…20 mA

 

Process Connection

Thread connections	G½ for hygienic adapters
Hygienic connections	Varivent®: N Conical nozzle (DIN 11851): DN25, DN40, DN50 Conical nozzle (DIN 11864-1A): DN40, DN50 SMS (1145): 51 mm Straight weld-in sleeve Spherical weld-in sleeve Weld-in sleeve with shoulder Collared weld-in sleeve

Read less...

To contact KROHNE Australia about KROHNE Temperature Sensor | Optitemp TRA-C61 use Get a quote.