IP 66 Heavy Duty Electrical Enclosures Get latest price

Read more...

To contact DaRa Switchboards about IP 66 Heavy Duty Electrical Enclosures use Get a quote.

IP 66 Heavy Duty Electrical Enclosures

• Brass chrome plated block hinges on door allows 180° opening
• Lift off door with full height integral door stiffener for extra strength
• Circuit identification and Schedule cards
• Double return gutter on enclosure to deflect dust and water
• Top, bottom removable gland plates with increased gland area
• Can be wall mounted or floor mounted using a channel plinth
• Pre-punched rail mounting system for ease of equipment fitting
• Keyhole mounting holes top and bottom as standard
• Can be joined together to make up any shape required for custom electrical installations

Some sites need more protection than others.

That’s why, at Dara, we also offer heavy duty enclosures to cope with the toughest environmental conditions. Proven to withstand the toughest environmental conditions, our heavy duty enclosures are used predominantly in mining sites across Australia.

1.6 mm Mild steel panel boards are used for applications of below 250A and the 2.00 mm series is used for high current applications, providing more space inside and gland plates (surface) area for a high volume of cable management. These panel boards are tough and manufactured from high quality steel, fully welded with the double return enclosure sealing flange that compresses tightly against the premium grade sealing gasket which can withstand compression properties at the highest temperatures. This attention to detail, extends the lifespan and increases the safety of the valuable electrical equipment inside.

For the toughest environmental conditions, we recommend heavy duty electrical switchboard enclosures. Particularly suitable for mining sites, theses enclosures are NATA tested for its highest IP rating.

Enclosures made with 1.0-1.6 mm Zincseal mild steel panel boards are suitable for applications of 250A and below, while the 2.00 mm series is more suitable for high current applications, providing more space inside and a gland plates area to accommodate a high volume of cable management.

Technical Data

• Complies with AS/NZS 3439.1 and 3439.3
• IP56 Degree of protection as standard and upgradable to IP66 with rain hood
• 1.6mm and 2.0mm Zincseal steel construction
• N12 Pastel Grey or X15 Electric Orange external finish as standard
• The powder coated finish involves a two stage preparation, consisting of degreasing, iron phosphate etch and rinse followed by an electro – statically applied polyester powder coat (120 microns thick), (ensuring anti-rust conditioning, superior finish and lasting strength)

Optional Accessories and Feature

• 316 marine grade stainless steel or Aluminium construction
• Can be shaded for your Architect’s special colour requirements, resulting in an aesthetically pleasing appearance
• Aluminum or Brass gland plates
• Rainhood for outdoor applications
• Door stays
• IPA Studs on Escutcheon
• Galvanized plinth/stand options for floor mounting
• External mounting bracket kits or welded mounting brackets for frame or wall mounted applications
• Lifting provisions for crane handling on site
• Ventilation louvers
• 3 point locking and other locking mechanisms (quarter turn, swing handle etc)
• Cyclone protection kits
• Flush surround kits
• Stainless steel painted or orbital sanded finish

Read less...

To contact DaRa Switchboards about IP 66 Heavy Duty Electrical Enclosures use Get a quote.