Internal Fixed Ratio Type Valve | WVS/WVT Get latest price

Read more...

To contact SlurryTuff about Internal Fixed Ratio Type Valve | WVS/WVT use Get a quote.

The WVS/WVT Internal Ratio Valve reduces a high upstream pressure to a low downstream pressure.

The ratio of the upstream pressure to the downstream pressure is fixed and is approximately constant at all flow rates up to the maximum of the valve.

Features:

• The valves are very stable and do not hunt or surge.
• The main valve poppet and seat are of our proven labyrinth grooved type that has proven to be best in "wire drawing" erosion, cavitation and dirt resistance.
• Pressure ratios from 1.5:1 up to 3:1 can be provided in the same valve bodies by changing only a small number of interchangeable parts.
• The wear parts are the same as are used in the other HPE ranges of high pressure water control valves that proved superior durability.
• The ratio will remain within ± 0,3 at all flows. At very low flow it will tend to increase to assist in shut-off. Closer ratios can be provided by our other control systems.
• The valves work well at differential pressures of up to 15MPa but increasing pressure decreases life.
• The internal parts are all of corrosion resistant materials.
• The seals are proven to the best design that stands up to dynamic water cylinder sealing.
• Maintenance can be done in line requiring access from one side only.

General description

Pressure ratios from 1.5:1 up to 3:1 can be provided in the same valve bodies by changing only a small number of interchangeable parts.

The wear parts are the same as are used in the other HPE ranges of high pressure water control valves that proved superior durability. 

The internal ratio valve operates on the principle of a high inlet pressure acting on a small area on the poppet producing a force that is balanced by an equal and opposite low downstream pressure acting on a large piston.

Read less...

To contact SlurryTuff about Internal Fixed Ratio Type Valve | WVS/WVT use Get a quote.